Daily Papers

Component-level audio Spoofing (Comp-Spoof) targets a new form of audio manipulation where only specific components of a signal, such as speech or environmental sound, are forged or substituted while other components remain genuine. Existing anti-spoofing datasets and methods treat an utterance or a segment as entirely bona fide or entirely spoofed, and thus cannot accurately detect component-level spoofing. To address this, we construct a new dataset, CompSpoof, covering multiple combinations of bona fide and spoofed speech and environmental sound. We further propose a separation-enhanced joint learning framework that separates audio components apart and applies anti-spoofing models to each one. Joint learning is employed, preserving information relevant for detection. Extensive experiments demonstrate that our method outperforms the baseline, highlighting the necessity of separate components and the importance of detecting spoofing for each component separately. Datasets and code are available at: https://github.com/XuepingZhang/CompSpoof.

While previous research in multivariate time series forecasting has focused on developing complex holistic models, this work advocates for a shift toward a granular, component-level understanding of their impacts. We propose TSCOMP, the first large-scale benchmark that systematically deconstructs deep forecasting methods into their core, fine-grained components--spanning series preprocessing, encoding strategies, network architectures including specific and large time-series models, and optimization methods. Using constrained orthogonal experimental design and extensive evaluations, we conduct multi-view analyses that reveal component effectiveness across different backbones, data characteristics, and their interactions. Beyond providing insights, this benchmark establishes a fine-grained performance corpus comprising over 20,000 model-dataset evaluations, which supports the learning of automated component selection, enabling zero-shot model construction on new datasets. Our experiments demonstrate that the corpus-driven approach, despite its simplicity, consistently outperforms state-of-the-art methods, validating the soundness of our evaluation design and confirming that systematic component selection surpasses manually designed complex architectures. All code and the performance corpus are publicly available at https://github.com/SUFE-AILAB/TSCOMP.

Steering methods influence Large Language Model behavior by identifying semantic directions in hidden representations, but are typically realized through inference-time activation interventions that apply a fixed, global modification to the model's internal states. While effective, such interventions often induce unfavorable attribute-utility trade-offs under strong control, as they ignore the fact that many behaviors are governed by a small and heterogeneous subset of model components. We propose Steer2Edit, a theoretically grounded, training-free framework that transforms steering vectors from inference-time control signals into diagnostic signals for component-level rank-1 weight editing. Instead of uniformly injecting a steering direction during generation, Steer2Edit selectively redistributes behavioral influence across individual attention heads and MLP neurons, yielding interpretable edits that preserve the standard forward pass and remain compatible with optimized parallel inference. Across safety alignment, hallucination mitigation, and reasoning efficiency, Steer2Edit consistently achieves more favorable attribute-utility trade-offs: at matched downstream performance, it improves safety by up to 17.2%, increases truthfulness by 9.8%, and reduces reasoning length by 12.2% on average. Overall, Steer2Edit provides a principled bridge between representation steering and weight editing by translating steering signals into interpretable, training-free parameter updates.

Hybrid language models combine softmax attention with linear-time sequence mechanisms such as state-space or linear-attention layers, but the functional contribution of each component type remains insufficiently characterized. We study component-level ablation in two sub-1B hybrid language models, Qwen3.5-0.8B and Falcon-H1-0.5B, using likelihood-based evaluation, downstream benchmarks, layer-wise interventions, random controls, and representation-level diagnostics. Across the tested models, removing either attention or the alternative sequence-processing pathway substantially degrades performance, indicating that both component types contribute to model behavior. Likelihood metrics are especially sensitive to the linear-attention or state-space pathway, while downstream benchmark degradation depends on task and architecture. Layer-wise ablations show that component importance is position-dependent, with the strongest effects concentrated in early or mid-network components rather than uniformly across depth. Random-removal controls further show that hybrid architectures and same-family Transformer baselines degrade differently under structural perturbation. These results suggest that component ablation is a useful diagnostic for understanding hybrid language model architectures. The findings provide evidence relevant to efficient model design, compression, robustness analysis, and deployment decisions in architectures that combine attention with alternative sequence-processing mechanisms.

In autonomous driving (AD), accurate perception is indispensable to achieving safe and secure driving. Due to its safety-criticality, the security of AD perception has been widely studied. Among different attacks on AD perception, the physical adversarial object evasion attacks are especially severe. However, we find that all existing literature only evaluates their attack effect at the targeted AI component level but not at the system level, i.e., with the entire system semantics and context such as the full AD pipeline. Thereby, this raises a critical research question: can these existing researches effectively achieve system-level attack effects (e.g., traffic rule violations) in the real-world AD context? In this work, we conduct the first measurement study on whether and how effectively the existing designs can lead to system-level effects, especially for the STOP sign-evasion attacks due to their popularity and severity. Our evaluation results show that all the representative prior works cannot achieve any system-level effects. We observe two design limitations in the prior works: 1) physical model-inconsistent object size distribution in pixel sampling and 2) lack of vehicle plant model and AD system model consideration. Then, we propose SysAdv, a novel system-driven attack design in the AD context and our evaluation results show that the system-level effects can be significantly improved, i.e., the violation rate increases by around 70%.

Coding harnesses shape how autonomous coding agents translate model capabilities into long-horizon software-engineering performance, yet existing work typically evaluates harnesses as monolithic systems, leaving the effectiveness of individual components unclear. To enable component-level comparisons, we study this question with a lightweight coding harness whose execution loop is fixed while three components are varied: planning, action space, and context management. Across four models evaluated on SWE-Bench Verified and Terminal-Bench 2.1, we evaluate 176 matched settings spanning five context-management strategies, four context-window budgets, and targeted ablations of planning and action space. We find that: (1) Context management becomes increasingly valuable as the context-window budget tightens, with most of its benefit coming from preventing context-overflow failures. (2) Staging rule-based elision before LLM-based summarization provides the strongest overall efficiency among the context-management strategies, whereas making elided content recoverable adds machinery that models rarely use and yields no accuracy gain. (3) Planning shifts from an accuracy scaffold for weaker models to a cost saver for stronger models, with little change in accuracy. (4) Predefined tools improve performance for models with weaker bash proficiency, whereas bash-capable models can operate effectively with a bash-only interface and achieve substantially lower cost, especially on command-line-centric tasks. Trajectory-level analysis explains these effects: context management extends execution trajectories without substantially altering agent behavior, planning changes where trajectories stop, and the action space changes the granularity at which code is written. These findings inform model- and budget-aware harness design and provide a modular framework for evaluating future harness components.

Large Language Model (LLM)-based agents are increasingly used for software engineering tasks, yet their performance is not determined by the base model alone. The agent harness substantially shapes how SE agents interact with repositories, execute actions, and validate solutions. However, the role of harness design remains insufficiently understood, especially across different models, tasks, and harness components. In this paper, we present a systematic empirical study of harness effects in SE agents. We first evaluate two representative harnesses, mini-SWE-agent and OpenCode, with ten models from two prominent open-weight model families, Qwen and DeepSeek, on three benchmarks: SWE-bench Pro, ProgramBench, and GitTaskBench. We then construct NanoHarness, a lightweight modular harness built on top of mini-SWE-agent, and use it to analyze five representative harness components: tool registry, context compression, explicit planning, subagents, and lazy skills. Experimental results show that harness effectiveness depends jointly on model capability and task type. Complex harnesses provide diminishing marginal gains on SWE-style issue repair as model capability improves, but can benefit stronger models on more complex and open-ended repository-level tasks. Component-level analysis on ProgramBench further shows that structured tool use and task-specific subagents provide the most stable improvements, while context compression and general subagents can hurt repository-generation performance. When combined, NanoHarness improves over mini-SWE-agent by 7.37 and 6.21 percentage points on Qwen3.7-Max and DeepSeek-V4-Pro, respectively, recovering most of the gains of product-level harnesses. These findings highlight harness design as a first-class factor in SE-agent performance and provide insights for building more effective and efficient coding agents.

The circuits framework in mechanistic interpretability aims to identify sparse subgraphs of model components that are causally responsible for a behavior, typically evaluated by measuring necessity and sufficiency. But these criteria say little about whether a circuit consistently captures how a model performs a task, or if it is specific to that task. We study these two properties, consistency and specificity, across six tasks and five models, extracting circuits at the component level (attention heads and MLP blocks) and at the level of individual MLP neurons. We find that component-level circuits are highly consistent and causally important for most tasks, but they are not specific: for a given task, ablating its own circuit drops accuracy by about as much as ablating another task's circuit. Neuron-level circuits, on the other hand, exhibit higher specificity across tasks, but far less consistency within tasks. This is explained by circuit overlap: component-level circuits share most of their components across tasks, related or not, while neuron-level circuits overlap only between closely related tasks. In a case study of the components shared by the task circuits of Llama-3.2-3B, we show that they consist mostly of MLP blocks, while the few attention heads within turn out to have general-purpose roles. Overall, our findings raise questions about the degree to which circuits can support targeted understanding of, and intervention on, model behavior.

Despite the existence of numerous Optical Character Recognition (OCR) tools, the lack of comprehensive open-source systems hampers the progress of document digitization in various low-resource languages, including Bengali. Low-resource languages, especially those with an alphasyllabary writing system, suffer from the lack of large-scale datasets for various document OCR components such as word-level OCR, document layout extraction, and distortion correction; which are available as individual modules in high-resource languages. In this paper, we introduce Bengali.AI-BRACU-OCR (bbOCR): an open-source scalable document OCR system that can reconstruct Bengali documents into a structured searchable digitized format that leverages a novel Bengali text recognition model and two novel synthetic datasets. We present extensive component-level and system-level evaluation: both use a novel diversified evaluation dataset and comprehensive evaluation metrics. Our extensive evaluation suggests that our proposed solution is preferable over the current state-of-the-art Bengali OCR systems. The source codes and datasets are available here: https://bengaliai.github.io/bbocr.

Recently, deep learning has driven significant advancements in multivariate time series forecasting (MTSF) tasks. However, much of the current research in MTSF tends to evaluate models from a holistic perspective, which obscures the individual contributions and leaves critical issues unaddressed. Adhering to the current modeling paradigms, this work bridges these gaps by systematically decomposing deep MTSF methods into their core, fine-grained components like series-patching tokenization, channel-independent strategy, attention modules, or even Large Language Models and Time-series Foundation Models. Through extensive experiments and component-level analysis, our work offers more profound insights than previous benchmarks that typically discuss models as a whole. Furthermore, we propose a novel automated solution called TSGym for MTSF tasks. Unlike traditional hyperparameter tuning, neural architecture searching or fixed model selection, TSGym performs fine-grained component selection and automated model construction, which enables the creation of more effective solutions tailored to diverse time series data, therefore enhancing model transferability across different data sources and robustness against distribution shifts. Extensive experiments indicate that TSGym significantly outperforms existing state-of-the-art MTSF and AutoML methods. All code is publicly available on https://github.com/SUFE-AILAB/TSGym.

Unlike human-engineered systems such as aeroplanes, where each component's role and dependencies are well understood, the inner workings of AI models remain largely opaque, hindering verifiability and undermining trust. This paper introduces SemanticLens, a universal explanation method for neural networks that maps hidden knowledge encoded by components (e.g., individual neurons) into the semantically structured, multimodal space of a foundation model such as CLIP. In this space, unique operations become possible, including (i) textual search to identify neurons encoding specific concepts, (ii) systematic analysis and comparison of model representations, (iii) automated labelling of neurons and explanation of their functional roles, and (iv) audits to validate decision-making against requirements. Fully scalable and operating without human input, SemanticLens is shown to be effective for debugging and validation, summarizing model knowledge, aligning reasoning with expectations (e.g., adherence to the ABCDE-rule in melanoma classification), and detecting components tied to spurious correlations and their associated training data. By enabling component-level understanding and validation, the proposed approach helps bridge the "trust gap" between AI models and traditional engineered systems. We provide code for SemanticLens on https://github.com/jim-berend/semanticlens and a demo on https://semanticlens.hhi-research-insights.eu.

Feature engineering remains a cornerstone of tabular data analysis, and Large Language Models (LLMs) have emerged as a promising paradigm for its automation, giving rise to LLM-powered Automated Tabular Feature Engineering (LATTE). However, the field lacks standardized, cost-aware evaluation platforms, and the combinatorial explosion of design choices obscures true algorithmic progress. To bridge these gaps, we systematically deconstruct 15 representative LATTE methods into a unified 6-dimensional taxonomy. Based on this abstraction, we introduce LATTEArena, a standardized, modular, and extensible benchmarking framework that decouples monolithic pipelines into reusable execution blocks. By distilling the massive combinatorial space, we evaluate 24 core LATTE configurations across 7 research questions. Our head-to-head benchmarking goes beyond predictive accuracy to quantify token efficiency and execution robustness, yielding 17 empirical findings on cost-effectiveness trade-offs. Furthermore, we provide 3 concrete recommendations for optimal real-world deployment. By enabling controlled component-level comparisons, LATTEArena shifts the paradigm from ad-hoc prompt engineering to systematic context management. All code, datasets, and over 4,000 execution logs are publicly available to foster a dynamic, community-driven benchmark. Our framework, leaderboard, and all artifacts are hosted on the LATTEArena project website at https://goodenhak.github.io/LATTEArena.

Graph neural networks are commonly described through family-specific equations whose notation obscures shared computations and structural differences. We introduce a common layer equation that represents covered architectures through seven components: an update domain, channel set, propagation bank, per-channel message maps, channel-fusion operator, ego/residual map, and update map. The central factorization separates where information moves, encoded by the propagation bank, from what moves, encoded by the message maps. Function-valued fillings extend the same equation across local message passing, attention, spectral filtering, global communication, relation-specific channels, higher-order domains, and geometric messages. We make this unification explicit and checkable through worked reductions of canonical layers and component assignments spanning seven nonexclusive architectural families. A fixed slot discipline assigns operations by computational role and defines the framework's coverage boundary. The decomposition also yields component-level theoretical insights: under endpoint-local messages and node-local updates, operator support bounds one-layer dependencies, and one-layer global mixing requires a full effective operator row under the stated hypotheses. The resulting framework organizes more than 200 architectures in a common design space, enables component-wise comparison and generation of structurally consistent architectures, and connects propagation choices to oversmoothing, oversquashing, heterophily, and expressivity. It further exposes the empirical inverse problem of mapping measurable graph and task properties to validated component choices.

This book develops an effective theory approach to understanding deep neural networks of practical relevance. Beginning from a first-principles component-level picture of networks, we explain how to determine an accurate description of the output of trained networks by solving layer-to-layer iteration equations and nonlinear learning dynamics. A main result is that the predictions of networks are described by nearly-Gaussian distributions, with the depth-to-width aspect ratio of the network controlling the deviations from the infinite-width Gaussian description. We explain how these effectively-deep networks learn nontrivial representations from training and more broadly analyze the mechanism of representation learning for nonlinear models. From a nearly-kernel-methods perspective, we find that the dependence of such models' predictions on the underlying learning algorithm can be expressed in a simple and universal way. To obtain these results, we develop the notion of representation group flow (RG flow) to characterize the propagation of signals through the network. By tuning networks to criticality, we give a practical solution to the exploding and vanishing gradient problem. We further explain how RG flow leads to near-universal behavior and lets us categorize networks built from different activation functions into universality classes. Altogether, we show that the depth-to-width ratio governs the effective model complexity of the ensemble of trained networks. By using information-theoretic techniques, we estimate the optimal aspect ratio at which we expect the network to be practically most useful and show how residual connections can be used to push this scale to arbitrary depths. With these tools, we can learn in detail about the inductive bias of architectures, hyperparameters, and optimizers.

Large Language Model (LLM) agents frameworks often employ modular architectures, incorporating components such as planning, reasoning, action execution, and reflection to tackle complex tasks. However, quantifying the contribution of each module to overall system performance remains a significant challenge, impeding optimization and interpretability. To address this, we introduce CapaBench (Capability-level Assessment Benchmark), an evaluation framework grounded in cooperative game theory's Shapley Value, which systematically measures the marginal impact of individual modules and their interactions within an agent's architecture. By replacing default modules with test variants across all possible combinations, CapaBench provides a principle method for attributing performance contributions. Key contributions include: (1) We are the first to propose a Shapley Value-based methodology for quantifying the contributions of capabilities in LLM agents; (2) Modules with high Shapley Values consistently lead to predictable performance gains when combined, enabling targeted optimization; and (3) We build a multi-round dataset of over 1,500 entries spanning diverse domains and practical task scenarios, enabling comprehensive evaluation of agent capabilities. CapaBench bridges the gap between component-level evaluation and holistic system assessment, providing actionable insights for optimizing modular LLM agents and advancing their deployment in complex, real-world scenarios.

Vision-language models (VLMs) are expected to respond helpfully to appropriate requests while withholding compliance with requests that are incorrect, unsafe, infeasible, or unanswerable. However, existing benchmarks predominantly evaluate non-compliance at the level of the query as a whole, assuming that each request either warrants compliance or requires withholding compliance. In practice, real-world queries can contain a mixture of answerable content and components for which compliance should be withheld. In this paper, we introduce KoNA, a benchmark for evaluating selective non-compliance in VLMs across five categories: False Premise, Visual Inaccessibility, Universal Unknown, Task Feasibility, and Safety. Each task evaluates two capabilities: query-level non-compliance and component-level non-compliance under paired single and compound queries. Our evaluation across diverse VLMs shows that models often fail to refuse, correct, or abstain appropriately, and these failures become more pronounced when queries require selective non-compliance. To address this challenge, we fine-tune VLMs using KoNA examples that require selective non-compliance, together with a fully answerable set that should receive direct answers. Our fine-tuned models achieve substantial improvements in non-compliance accuracy while largely maintaining performance on fully answerable tasks. These results suggest that the fine-tuned models can distinguish between answerable components and those requiring non-compliance and respond in a task-appropriate manner.

We present a new task and dataset, ScreenQA, for screen content understanding via question answering. The existing screen datasets are focused either on structure and component-level understanding, or on a much higher-level composite task such as navigation and task completion. We attempt to bridge the gap between these two by annotating 86K question-answer pairs over the RICO dataset in hope to benchmark the screen reading comprehension capacity.

Many toolkit developers seek to streamline the visualization programming process through structured support such as prescribed templates and example galleries. However, few projects examine how users organize their own visualization programs and how their coding choices may deviate from the intents of toolkit developers, impacting visualization prototyping and design. Further, is it possible to infer users' reasoning indirectly through their code, even when users copy code from other sources? We explore this question through a qualitative analysis of 715 D3 programs on Observable. We identify three levels of program organization based on how users decompose their code into smaller blocks: Program-, Chart-, and Component-Level code decomposition, with a strong preference for Component-Level reasoning. In a series of interviews, we corroborate that these levels reflect how Observable users reason about visualization programs. We compare common user-made components with those theorized in the Grammar of Graphics to assess overlap in user and toolkit developer reasoning. We find that, while the Grammar of Graphics covers basic visualizations well, it falls short in describing complex visualization types, especially those with animation, interaction, and parameterization components. Our findings highlight how user practices differ from formal grammars and reinforce ongoing efforts to rethink visualization toolkit support, including augmenting learning tools and AI assistants to better reflect real-world coding strategies.

Recent advances in few-step diffusion models have demonstrated their efficiency and effectiveness by shortcutting the probabilistic paths of diffusion models, especially in training one-step diffusion models from scratch (a.k.a. shortcut models). However, their theoretical derivation and practical implementation are often closely coupled, which obscures the design space. To address this, we propose a common design framework for representative shortcut models. This framework provides theoretical justification for their validity and disentangles concrete component-level choices, thereby enabling systematic identification of improvements. With our proposed improvements, the resulting one-step model achieves a new state-of-the-art FID50k of 2.85 on ImageNet-256x256 under the classifier-free guidance setting with one step generation, and further reaches FID50k of 2.53 with 2x training steps. Remarkably, the model requires no pre-training, distillation, or curriculum learning. We believe our work lowers the barrier to component-level innovation in shortcut models and facilitates principled exploration of their design space.

The increasing use of Machine Learning (ML) components embedded in autonomous systems -- so-called Learning-Enabled Systems (LESs) -- has resulted in the pressing need to assure their functional safety. As for traditional functional safety, the emerging consensus within both, industry and academia, is to use assurance cases for this purpose. Typically assurance cases support claims of reliability in support of safety, and can be viewed as a structured way of organising arguments and evidence generated from safety analysis and reliability modelling activities. While such assurance activities are traditionally guided by consensus-based standards developed from vast engineering experience, LESs pose new challenges in safety-critical application due to the characteristics and design of ML models. In this article, we first present an overall assurance framework for LESs with an emphasis on quantitative aspects, e.g., breaking down system-level safety targets to component-level requirements and supporting claims stated in reliability metrics. We then introduce a novel model-agnostic Reliability Assessment Model (RAM) for ML classifiers that utilises the operational profile and robustness verification evidence. We discuss the model assumptions and the inherent challenges of assessing ML reliability uncovered by our RAM and propose solutions to practical use. Probabilistic safety argument templates at the lower ML component-level are also developed based on the RAM. Finally, to evaluate and demonstrate our methods, we not only conduct experiments on synthetic/benchmark datasets but also scope our methods with case studies on simulated Autonomous Underwater Vehicles and physical Unmanned Ground Vehicles.

Large Language Model (LLM)-based agents are widely used in real-world applications such as customer service, web navigation, and software engineering. As these systems become more autonomous and are deployed at scale, understanding why an agent takes a particular action becomes increasingly important for accountability and governance. However, existing research predominantly focuses on failure attribution to localize explicit errors in unsuccessful trajectories, which is insufficient for explaining the reason behind agent behaviors. To bridge this gap, we propose a novel framework for general agentic attribution, designed to identify the internal factors driving agent actions regardless of the task outcome. Our framework operates hierarchically to manage the complexity of agent interactions. Specifically, at the component level, we employ temporal likelihood dynamics to identify critical interaction steps; then at the sentence level, we refine this localization using perturbation-based analysis to isolate the specific textual evidence. We validate our framework across a diverse suite of agentic scenarios, including standard tool use and subtle reliability risks like memory-induced bias. Experimental results demonstrate that the proposed framework reliably pinpoints pivotal historical events and sentences behind the agent behavior, offering a critical step toward safer and more accountable agentic systems. Codes are available at https://github.com/AI45Lab/AgentDoG.

This paper presents a comprehensive experimental evaluation and detailed analysis of state-of-the-art multi-object tracking algorithms, with an emphasis on quantifying the individual contributions of detection and association components to overall tracking performance. Unlike existing surveys that primarily offer theoretical categorizations or taxonomies of tracking methods, our work adopts a rigorous experimental perspective grounded in publicly available implementations, providing practical guidance for researchers and practitioners in method selection and system design. We introduce a unified pipeline diagram that consolidates the core components across the two main branches of visual multi-object tracking: tracking-by-detection and end-to-end deep learning paradigms, and systematically analyze the object detection, feature extraction, and data association modules. Through extensive empirical studies on standard benchmarks, including MOT16, MOT17, MOT20, SportsMOT, DanceTrack, and CrowdTrack datasets, we reveal critical insights: (1) detection quality dominates association strategy performance, with detector improvements yielding more than 10% gains compared to less than 5% from refined association strategies; (2) modern deep learning detectors paired with specialized re-identification models significantly outperform joint detection and embedding approaches; and (3) transformer-based end-to-end methods exhibit greater robustness to detection quality variations but at a substantial computational cost. Our findings from extensive experiments provide key insights into component-level effects in MOT, particularly the dominant influence of detection quality relative to association, while offering practical insights for designing and optimizing MOT systems under varying performance and robustness requirements. Code and experimental setups are available at github.com/linh-gist/VisualMOT.

The rapid growth of 3D Gaussian Splatting (3DGS) research demands significant effort to reimplement papers before building on them. We introduce SPLATIFY, a multi-agent framework that converts 3DGS papers into trainable gsplat-based implementations, where generic paper-to-code methods and frontier models fail. SPLATIFY achieves this through five innovations: (1) A context-free grammar for gsplat over a modular method template with extension points for losses, densification, rendering, and optimization, constraining synthesis so generated code satisfies gsplat's architectural invariants by construction. (2) Architectural elements for faithful reproduction: fork-aware citation recovery retrieving component-level code at function-level granularity, Graph-of-Thought synthesis in topological dependency order, RAG-guided in-context example selection from over 20 verified implementations, and visual feedback combining PSNR-guided regeneration, Gaussian-level structural checks, and VLM-driven patching. (3) Knowledge-driven compositional improvement that autonomously finds weaknesses and composes complementary regularizers, losses, and densification strategies to improve upon original results. (4) Interdisciplinary method discovery where agents retrieve physical priors from outside the 3DGS literature and compose them with rendering knowledge to produce methods for previously unaddressed scene types. (5) SPLATIFY-Bench, an evaluation framework across 30 diverse 3DGS papers. On papers without public code, SPLATIFY matches expert implementations while reducing development time from weeks to minutes, and through compositional discovery further improves PSNR by up to 2.4 dB. We additionally demonstrate novel methods for volumetric nebula rendering and other scientific domains, synthesized entirely by SPLATIFY.

Recent advances in physical 3D generation have enabled visually faithful assets with simulatable mechanical behavior. However, existing methods provide limited control over material behavior beyond appearance-based inference and struggle to estimate physical properties from complex interactions between objects and semantic parts. Therefore, we present PhysForge, a Video Diffusion Model (VDM)-based framework for addressing these challenges, comprising two complementary modules for material-controllable physical fitting and componentlevel interaction modeling. The first, PhysFit, leverages material-conditioned VDM dynamics as references for physical-property fitting, introducing windowed fitting to focus on material-revealing interactions and Hallucinated Forcing to disentangle nonphysical motion hallucinated by the VDM from material responses. The second, PhysComp decomposes complex interactions into individual objects and semantic components, enabling their physical parameters to be optimized independently and flexibly composed for joint simulation. Experiments on PhysAssets and Google Scanned Objects demonstrate that, compared with existing methods, PhysForge provides stronger control over material-dependent physical responses while supporting component-level physical modeling for complex interactions. It achieves the best CLIP and physical controllability scores on both common and uncommon materials, with qualitative comparisons, component-level ablations, and a user study further supporting these improvements. Our project page is available at https://masterwanna.github.io/PhysForge.html .

In this paper we investigate learning visual models for the steps of ordinary tasks using weak supervision via instructional narrations and an ordered list of steps instead of strong supervision via temporal annotations. At the heart of our approach is the observation that weakly supervised learning may be easier if a model shares components while learning different steps: `pour egg' should be trained jointly with other tasks involving `pour' and `egg'. We formalize this in a component model for recognizing steps and a weakly supervised learning framework that can learn this model under temporal constraints from narration and the list of steps. Past data does not permit systematic studying of sharing and so we also gather a new dataset, CrossTask, aimed at assessing cross-task sharing. Our experiments demonstrate that sharing across tasks improves performance, especially when done at the component level and that our component model can parse previously unseen tasks by virtue of its compositionality.

Self-supervised learning has brought about a revolutionary paradigm shift in various computing domains, including NLP, vision, and biology. Recent approaches involve pre-training transformer models on vast amounts of unlabeled data, serving as a starting point for efficiently solving downstream tasks. In the realm of reinforcement learning, researchers have recently adapted these approaches by developing models pre-trained on expert trajectories, enabling them to address a wide range of tasks, from robotics to recommendation systems. However, existing methods mostly rely on intricate pre-training objectives tailored to specific downstream applications. This paper presents a comprehensive investigation of models we refer to as Pretrained Action-State Transformer Agents (PASTA). Our study uses a unified methodology and covers an extensive set of general downstream tasks including behavioral cloning, offline RL, sensor failure robustness, and dynamics change adaptation. Our goal is to systematically compare various design choices and provide valuable insights to practitioners for building robust models. Key highlights of our study include tokenization at the action and state component level, using fundamental pre-training objectives like next token prediction, training models across diverse domains simultaneously, and using parameter efficient fine-tuning (PEFT). The developed models in our study contain fewer than 10 million parameters and the application of PEFT enables fine-tuning of fewer than 10,000 parameters during downstream adaptation, allowing a broad community to use these models and reproduce our experiments. We hope that this study will encourage further research into the use of transformers with first-principles design choices to represent RL trajectories and contribute to robust policy learning.

Recent advancements in Web AI agents have demonstrated remarkable capabilities in addressing complex web navigation tasks. However, emerging research shows that these agents exhibit greater vulnerability compared to standalone Large Language Models (LLMs), despite both being built upon the same safety-aligned models. This discrepancy is particularly concerning given the greater flexibility of Web AI Agent compared to standalone LLMs, which may expose them to a wider range of adversarial user inputs. To build a scaffold that addresses these concerns, this study investigates the underlying factors that contribute to the increased vulnerability of Web AI agents. Notably, this disparity stems from the multifaceted differences between Web AI agents and standalone LLMs, as well as the complex signals - nuances that simple evaluation metrics, such as success rate, often fail to capture. To tackle these challenges, we propose a component-level analysis and a more granular, systematic evaluation framework. Through this fine-grained investigation, we identify three critical factors that amplify the vulnerability of Web AI agents; (1) embedding user goals into the system prompt, (2) multi-step action generation, and (3) observational capabilities. Our findings highlights the pressing need to enhance security and robustness in AI agent design and provide actionable insights for targeted defense strategies.

Model-based reinforcement-learning agents of the DreamerV3 family forget catastrophically when trained on task sequences, even when an unbounded replay buffer preserves every earlier experience. We ask a question the continual-RL literature has assumed an answer to but never measured: which component forgets? Under never-clear replay, pre-registered component-level probes (n=3 seeds throughout) show that the world model retains essentially everything measurable about old tasks -- reward discrimination (retention ratio ~1.0), value estimates, and termination structure -- while the actor's behavior collapses. Forgetting in this regime is a channel problem, not a memory problem. We demonstrate this by intervention: with the world model frozen and identical imagined rollouts, reinforcement learning in imagination fails to recover a lost skill (0/3 seeds), while supervised self-imitation on the world model's own graded dreams recovers it on 3/3 seeds with zero environment interaction. Interleaved during training, this graded dream rehearsal yields a task-label-free, parameter-constant continual learner: 3/3 four-task chains retained where plain replay passes 0/3, 3/3 eight-task chains, and consistent gains over matched real-episode cloning (paired difference +0.13, bootstrap 95% CI [0.07, 0.24], complete seed separation). The dream-grading step is load-bearing: we characterize two scoring failure modes, provide an offline selection gauge that caught both before they contaminated results, and give a realized-first grading rule that closes them. All experiments were pre-registered with committed protocols; every refuted hypothesis is reported.

Scaling multi-task low-rank adaptation (LoRA) to a large number of tasks induces catastrophic performance degradation, such as an accuracy drop from 88.2% to 2.0% on DOTA when scaling from 5 to 15 tasks. This failure is due to parameter and representation misalignment. We find that existing solutions, like regularization and dynamic routing, fail at scale because they are constrained by a fundamental trade-off: strengthening regularization to reduce inter-task conflict inadvertently suppresses the essential feature discrimination required for effective routing. In this work, we identify two root causes for this trade-off. First, uniform regularization disrupts inter-task knowledge sharing: shared underlying knowledge concentrates in high-SV components (89% alignment on Flanv2->BBH). Uniform regularization forces high-SV components to update in orthogonal directions, directly disrupting the shared knowledge. Second, Conflict Amplification: Applying LoRA at the component-level (e.g., W_q, W_v) amplifies gradient conflicts; we show block-level adaptation reduces this conflict by 76% with only 50% parameters. Based on these insights, we propose mtLoRA, a scalable solution with three novel designs: 1) Spectral-Aware Regularization to selectively orthogonalize low-SV components while preserving high-SV shared knowledge, 2) Block-Level Adaptation to mitigate conflict amplification and largely improve parameter efficiency, and 3) Fine-Grained Routing using dimension-specific weights for superior expressive power. On four large-scale (15-25 tasks) vision (DOTA and iNat2018) and NLP (Dolly-15k and BBH) benchmarks, mtLoRA achieves 91.7%, 81.5%, 44.5% and 38.5% accuracy on DOTA, iNat2018, Dolly-15k and BBH respectively, outperforming the state-of-the-art by 2.3% on average while using 47% fewer parameters and 24% less training time.

World Models (WMs) can support Multimodal Agents (MAs) through simulated experience, while Agent trajectories can inform World Model refinement. Evaluating this interaction requires separate evidence about action selection and state evolution. We introduce Dual Exam, which tests Agents under fixed environment response mechanisms and World Models under fixed action interventions across physical, digital, social, and scientific domains. The Agent track compares 10 configurations on 1,088 items in 15 reporting categories. The World Model track contains 400 cases across eight scenarios; 15 configurations have full coverage and one covers six scenarios. GPT 6 Astra leads the case-weighted Agent Index at 31.3, and GPT-Image-2 leads the full-coverage WM Overall at 21.7. These scores use different tasks and metrics and are not directly comparable. A 150-case pilot of one coupled pairing records zero task successes and motivates component-level diagnosis. Results reveal uneven task performance and failures to preserve task-relevant state. Their value for predicting coupled success or sustained reciprocal learning remains to be established.

Recently, text-guided scalable vector graphics (SVG) synthesis has demonstrated significant potential in domains such as iconography and sketching. However, SVGs generated from existing Text-to-SVG methods often lack editability and exhibit deficiencies in visual quality and diversity. In this paper, we propose a novel text-guided vector graphics synthesis method to address these limitations. To enhance the editability of output SVGs, we introduce a Hierarchical Image VEctorization (HIVE) framework that operates at the semantic object level and supervises the optimization of components within the vector object. This approach facilitates the decoupling of vector graphics into distinct objects and component levels. Our proposed HIVE algorithm, informed by image segmentation priors, not only ensures a more precise representation of vector graphics but also enables fine-grained editing capabilities within vector objects. To improve the diversity of output SVGs, we present a Vectorized Particle-based Score Distillation (VPSD) approach. VPSD addresses over-saturation issues in existing methods and enhances sample diversity. A pre-trained reward model is incorporated to re-weight vector particles, improving aesthetic appeal and enabling faster convergence. Additionally, we design a novel adaptive vector primitives control strategy, which allows for the dynamic adjustment of the number of primitives, thereby enhancing the presentation of graphic details. Extensive experiments validate the effectiveness of the proposed method, demonstrating its superiority over baseline methods in terms of editability, visual quality, and diversity. We also show that our new method supports up to six distinct vector styles, capable of generating high-quality vector assets suitable for stylized vector design and poster design. Code and demo will be released at: http://ximinng.github.io/SVGDreamerV2Project/

Adaptive hierarchical systems accumulate routing state as they learn which components to select. We show that this state already defines a coherent attribution over the hierarchy. A leaf receives the product of the local routing weights on its path, while an internal node receives the corresponding prefix product. The same learned state can therefore be read consistently at group and component levels, and every finer readout sums exactly to its coarser counterpart. This attribution describes the preferences learned by the deployed router rather than an intrinsic or counterfactual value of a component. Across LLM, Census, agentic, and telecom-network hierarchies, the learned state contains meaningful structure at several levels, and the clearest organisation need not occur at the leaves. In the telecom study, Site- or Region-level readouts usually reveal clearer structure than Cell-level readouts. Comparison with Shapley attribution can then show whether the preferences learned in deployment match capabilities revealed by counterfactual coalitions. The result is a hierarchical explanation that requires no separate attribution model: the same routing state supports consistent explanations at several levels of the system.

Large Language Models (LLMs) often generate inconsistent responses when prompted with semantically equivalent paraphrased inputs. Recently, activation steering, a technique that modulates LLMs' behaviours by adjusting their latent representations during inference time, has been explored to improve the semantic consistency of LLMs. However, these methods typically operate at the model component level, such as layer hidden states or attention head outputs. They face a challenge due to the ``polysemanticity issue'', where the model components of LLMs typically encode multiple entangled features, making precise steering difficult. To address this challenge, we drill down to feature-level representations and propose LF-Steering, a novel activation steering approach to precisely identify latent feature representations responsible for semantic inconsistency. More specifically, our method maps the hidden states of the relevant transformer layer into a sparsely activated, high-dimensional feature space based on a sparse autoencoder (SAE), ensuring model steering based on decoupled feature representations with minimal interference. Comprehensive experiments on NLU and NLG datasets demonstrate the effectiveness of our method in enhancing semantic consistency, resulting in significant performance gains for various NLU and NLG tasks.

Multimodal Large Language Models (MLLMs) have demonstrated remarkable capabilities across a wide range of vision-language tasks. However, their performance as embodied agents, which requires multi-round dialogue spatial reasoning and sequential action prediction, needs further exploration. Our work investigates this potential in the context of Vision-and-Language Navigation (VLN) by introducing a unified and extensible evaluation framework to probe MLLMs as zero-shot agents by bridging traditional navigation datasets into a standardized benchmark, named VLN-MME. We simplify the evaluation with a highly modular and accessible design. This flexibility streamlines experiments, enabling structured comparisons and component-level ablations across diverse MLLM architectures, agent designs, and navigation tasks. Crucially, enabled by our framework, we observe that enhancing our baseline agent with Chain-of-Thought (CoT) reasoning and self-reflection leads to an unexpected performance decrease. This suggests MLLMs exhibit poor context awareness in embodied navigation tasks; although they can follow instructions and structure their output, their 3D spatial reasoning fidelity is low. VLN-MME lays the groundwork for systematic evaluation of general-purpose MLLMs in embodied navigation settings and reveals limitations in their sequential decision-making capabilities. We believe these findings offer crucial guidance for MLLM post-training as embodied agents.

We present TiPToP, an extensible modular system that combines pretrained vision foundation models with an existing Task and Motion Planner (TAMP) to solve multi-step manipulation tasks directly from input RGB images and natural-language instructions. Our system aims to be simple and easy-to-use: it can be installed and run on a standard DROID setup in under one hour and adapted to new embodiments with minimal effort. We evaluate TiPToP -- which requires zero robot data -- over 28 tabletop manipulation tasks in simulation and the real world and find it matches or outperforms π_{0.5}-DROID, a vision-language-action (VLA) model fine-tuned on 350 hours of embodiment-specific demonstrations. TiPToP's modular architecture enables us to analyze the system's failure modes at the component level. We analyze results from an evaluation of 173 trials and identify directions for improvement. We release TiPToP open-source to further research on modular manipulation systems and tighter integration between learning and planning. Project website and code: https://tiptop-robot.github.io

Automatic few-shot font generation (AFFG), aiming at generating new fonts with only a few glyph references, reduces the labor cost of manually designing fonts. However, the traditional AFFG paradigm of style-content disentanglement cannot capture the diverse local details of different fonts. So, many component-based approaches are proposed to tackle this problem. The issue with component-based approaches is that they usually require special pre-defined glyph components, e.g., strokes and radicals, which is infeasible for AFFG of different languages. In this paper, we present a novel font generation approach by aggregating styles from character similarity-guided global features and stylized component-level representations. We calculate the similarity scores of the target character and the referenced samples by measuring the distance along the corresponding channels from the content features, and assigning them as the weights for aggregating the global style features. To better capture the local styles, a cross-attention-based style transfer module is adopted to transfer the styles of reference glyphs to the components, where the components are self-learned discrete latent codes through vector quantization without manual definition. With these designs, our AFFG method could obtain a complete set of component-level style representations, and also control the global glyph characteristics. The experimental results reflect the effectiveness and generalization of the proposed method on different linguistic scripts, and also show its superiority when compared with other state-of-the-art methods. The source code can be found at https://github.com/awei669/VQ-Font.

Existing benchmarks for hardware design primarily evaluate Large Language Models (LLMs) on isolated, component-level tasks such as generating HDL modules from specifications, leaving repository-scale evaluation unaddressed. We introduce HWE-Bench, the first large-scale, repository-level benchmark for evaluating LLM agents on real-world hardware bug repair tasks. HWE-Bench comprises 417 task instances derived from real historical bug-fix pull requests across six major open-source projects spanning both Verilog/SystemVerilog and Chisel, covering RISC-V cores, SoCs, and security roots-of-trust. Each task is grounded in a fully containerized environment where the agent must resolve a real bug report, with correctness validated through the project's native simulation and regression flows. The benchmark is built through a largely automated pipeline that enables efficient expansion to new repositories. We evaluate seven LLMs with four agent frameworks and find that the best agent resolves 70.7% of tasks overall, with performance exceeding 90% on smaller cores but dropping below 65% on complex SoC-level projects. We observe larger performance gaps across models than commonly reported on software benchmarks, and difficulty is driven by project scope and bug-type distribution rather than code size alone. Our failure analysis traces agent failures to three stages of the debugging process: fault localization, hardware-semantic reasoning, and cross-artifact coordination across RTL, configuration, and verification components, providing concrete directions for developing more capable hardware-aware agents.

Large language models (LLMs) can generate syntactically valid optimization programs, yet often struggle to reliably choose an effective modeling strategy, leading to incorrect formulations and inefficient solver behavior. We propose SAGE, a strategy-aware framework that makes Modeling Strategy explicit in both data construction and post-training. SAGE builds a solver-verified multi-strategy dataset and trains a student model with supervised fine-tuning followed by Segment-Weighted GRPO using a composite reward over format compliance, correctness, and solver efficiency. Across eight benchmarks spanning synthetic and real-world settings, SAGE improves average pass@1 from 72.7 to 80.3 over the strongest open-source baseline. With multiple generations, SAGE discovers more distinct correct formulations and improves component-level diversity at pass@16 by 19-29%. At the largest scale, SAGE produces more compact constraint systems with 14.2% fewer constraints than the baseline, consistent with solver-efficient modeling. Overall, these results show that making Modeling Strategy explicit improves automated optimization modeling. Code is available at https://github.com/rachhhhing/SAGE.

Design-to-code translates high-fidelity UI designs into executable front-end implementations, but progress remains hard to compare due to inconsistent datasets, toolchains, and evaluation protocols. We introduce 1D-Bench, a benchmark grounded in real e-commerce workflows, where each instance provides a reference rendering and an exported intermediate representation that may contain extraction errors. 1D is short for one day, representing the efficient completion of design-to-code tasks in less than one day. Models take both as input, using the intermediate representation as structural cues while being evaluated against the reference rendering, which tests robustness to intermediate representation defects rather than literal adherence. 1D-Bench requires generating an executable React codebase under a fixed toolchain with an explicit component hierarchy, and defines a multi-round setting in which models iteratively apply component-level edits using execution feedback. Experiments on commercial and open-weight multimodal models show that iterative editing generally improves final performance by increasing rendering success and often improving visual similarity. We further conduct a pilot study on post-training with synthetic repair trajectories and reinforcement learning based editing, and observe limited and unstable gains that may stem from sparse terminal rewards and high-variance file-level updates. The data and scripts used in this study are available in an anonymized repository at https://anonymous.4open.science/r/d2c-benchmark-A9C4/.

The performance of LLM-based agents is jointly shaped by the base model and the harness used when interacting with the environment. This exposes them to safety risks in both harmful final responses and multi-step execution trajectories. Existing safety alignment mechanisms often rely on either external harness updates or policy optimization, yet applying either paradigm in isolation fails to bridge runtime control with intrinsic safety. We propose SafeEvolve, an experience-driven self-evolving framework for agent safety alignment. SafeEvolve leverages safety experience from completed on-policy trajectories to drive a continual loop of harness-policy co-evolution. On the harness side, SafeEvolve converts trajectory-level safety evidence into bounded, component-level updates across safety prompt and hierarchical skills, yielding auditable and reversible harness artifacts. On the policy side, SafeEvolve follows a two-stage SFT-RL paradigm, where harness-use SFT bootstraps the policy to actively leverage evolved harness artifacts, and harness-augmented RL further shapes autonomous safety behaviors during multi-step exploration via verifier-decomposed rewards. Through harness-policy co-evolution, SafeEvolve converts safety experience into an evolved runtime harness and improved policy behavior. Experiments on agentic safety benchmarks show that SafeEvolve achieves a stronger safety-utility tradeoff than existing baselines. For Qwen3.5-4B, SafeEvolve achieves a 3times ASR reduction on AgentDojo while improving benign utility from 59.79% to 61.86%.

There is a growing interest in developing goal-oriented dialog systems which serve users in accomplishing complex tasks through multi-turn conversations. Although many methods are devised to evaluate and improve the performance of individual dialog components, there is a lack of comprehensive empirical study on how different components contribute to the overall performance of a dialog system. In this paper, we perform a system-wise evaluation and present an empirical analysis on different types of dialog systems which are composed of different modules in different settings. Our results show that (1) a pipeline dialog system trained using fine-grained supervision signals at different component levels often obtains better performance than the systems that use joint or end-to-end models trained on coarse-grained labels, (2) component-wise, single-turn evaluation results are not always consistent with the overall performance of a dialog system, and (3) despite the discrepancy between simulators and human users, simulated evaluation is still a valid alternative to the costly human evaluation especially in the early stage of development.

In computational pathology, understanding and generation have evolved along disparate paths: advanced understanding models already exhibit diagnostic-level competence, whereas generative models largely simulate pixels. Progress remains hindered by three coupled factors: the scarcity of large, high-quality image-text corpora; the lack of precise, fine-grained semantic control, which forces reliance on non-semantic cues; and terminological heterogeneity, where diverse phrasings for the same diagnostic concept impede reliable text conditioning. We introduce UniPath, a semantics-driven pathology image generation framework that leverages mature diagnostic understanding to enable controllable generation. UniPath implements Multi-Stream Control: a Raw-Text stream; a High-Level Semantics stream that uses learnable queries to a frozen pathology MLLM to distill paraphrase-robust Diagnostic Semantic Tokens and to expand prompts into diagnosis-aware attribute bundles; and a Prototype stream that affords component-level morphological control via a prototype bank. On the data front, we curate a 2.65M image-text corpus and a finely annotated, high-quality 68K subset to alleviate data scarcity. For a comprehensive assessment, we establish a four-tier evaluation hierarchy tailored to pathology. Extensive experiments demonstrate UniPath's SOTA performance, including a Patho-FID of 80.9 (51% better than the second-best) and fine-grained semantic control achieving 98.7% of the real-image. The meticulously curated datasets, complete source code, and pre-trained model weights developed in this study will be made openly accessible to the public.

Anomaly segmentation is a critical task for driving applications, and it is approached traditionally as a per-pixel classification problem. However, reasoning individually about each pixel without considering their contextual semantics results in high uncertainty around the objects' boundaries and numerous false positives. We propose a paradigm change by shifting from a per-pixel classification to a mask classification. Our mask-based method, Mask2Anomaly, demonstrates the feasibility of integrating an anomaly detection method in a mask-classification architecture. Mask2Anomaly includes several technical novelties that are designed to improve the detection of anomalies in masks: i) a global masked attention module to focus individually on the foreground and background regions; ii) a mask contrastive learning that maximizes the margin between an anomaly and known classes; and iii) a mask refinement solution to reduce false positives. Mask2Anomaly achieves new state-of-the-art results across a range of benchmarks, both in the per-pixel and component-level evaluations. In particular, Mask2Anomaly reduces the average false positives rate by 60% wrt the previous state-of-the-art. Github page: https://github.com/shyam671/Mask2Anomaly-Unmasking-Anomalies-in-Road-Scene-Segmentation.

Engineering design operates through hierarchical abstraction from system specifications to component implementations, requiring visual understanding coupled with mathematical reasoning at each level. While Multi-modal Large Language Models (MLLMs) excel at natural image tasks, their ability to extract mathematical models from technical diagrams remains unexplored. We present CircuitSense, a comprehensive benchmark evaluating circuit understanding across this hierarchy through 8,006+ problems spanning component-level schematics to system-level block diagrams. Our benchmark uniquely examines the complete engineering workflow: Perception, Analysis, and Design, with a particular emphasis on the critical but underexplored capability of deriving symbolic equations from visual inputs. We introduce a hierarchical synthetic generation pipeline consisting of a grid-based schematic generator and a block diagram generator with auto-derived symbolic equation labels. Comprehensive evaluation of six state-of-the-art MLLMs, including both closed-source and open-source models, reveals fundamental limitations in visual-to-mathematical reasoning. Closed-source models achieve over 85\% accuracy on perception tasks involving component recognition and topology identification, yet their performance on symbolic derivation and analytical reasoning falls below 19\%, exposing a critical gap between visual parsing and symbolic reasoning. Models with stronger symbolic reasoning capabilities consistently achieve higher design task accuracy, confirming the fundamental role of mathematical understanding in circuit synthesis and establishing symbolic reasoning as the key metric for engineering competence.

Improving diesel engine efficiency, reducing emissions, and enabling robust health monitoring have been critical research topics in engine modelling. While recent advancements in the use of neural networks for system monitoring have shown promising results, such methods often focus on component-level analysis, lack generalizability, and physical interpretability. In this study, we propose a novel hybrid framework that combines physics-informed neural networks (PINNs) with deep operator networks (DeepONet) to enable accurate and computationally efficient parameter identification in mean-value diesel engine models. Our method leverages physics-based system knowledge in combination with data-driven training of neural networks to enhance model applicability. Incorporating offline-trained DeepONets to predict actuator dynamics significantly lowers the online computation cost when compared to the existing PINN framework. To address the re-training burden typical of PINNs under varying input conditions, we propose two transfer learning (TL) strategies: (i) a multi-stage TL scheme offering better runtime efficiency than full online training of the PINN model and (ii) a few-shot TL scheme that freezes a shared multi-head network body and computes physics-based derivatives required for model training outside the training loop. The second strategy offers a computationally inexpensive and physics-based approach for predicting engine dynamics and parameter identification, offering computational efficiency over the existing PINN framework. Compared to existing health monitoring methods, our framework combines the interpretability of physics-based models with the flexibility of deep learning, offering substantial gains in generalization, accuracy, and deployment efficiency for diesel engine diagnostics.

Contemporary machine learning paradigm excels in statistical data analysis, solving problems that classical AI couldn't. However, it faces key limitations, such as a lack of integration with planning, incomprehensible internal structure, and inability to learn continually. We present the initial design for an AI system, Agential AI (AAI), in principle operating independently or on top of statistical methods, designed to overcome these issues. AAI's core is a learning method that models temporal dynamics with guarantees of completeness, minimality, and continual learning, using component-level variation and selection to learn the structure of the environment. It integrates this with a behavior algorithm that plans on a learned model and encapsulates high-level behavior patterns. Preliminary experiments on a simple environment show AAI's effectiveness and potential.

Predictive Physical AI systems output state rollouts, action chunks, and latent plans, yet a low root-mean-square error (RMSE) does not imply that a particular proposal is physically executable. We formulate physical admissibility as a prediction-control interface: before execution, a decoded proposal is treated as candidate dynamics and evaluated using kinematic, dynamic, and direct-to-composed horizon conditions. Passing is not a certificate of task success; rejection identifies violation of the specified physical envelope and gives a component-level reason. On Hugging Face LeRobot PushT, controlled falsification shows that one-step prediction-RMSE and standardized dynamics residuals reach area under the receiver operating characteristic curve (AUC) 0.982 and 0.972, kinematic-only conditions reach AUC 0.592, and the full gate reaches AUC 0.957 with condition-level attribution. In replay-based intervention experiments, residual-based filters and the full physical-admissibility gate prevent 87-$89% of invalid proposals while preserving mean progress near 0.998.

Mechanistic interpretability has made substantial progress in automatically localizing circuits, but explaining what localized components do remains labor-intensive and difficult to standardize. In this work, we study whether language model (LM) agents can assist with this explanation problem once a circuit has already been identified. We introduce AgenticInterpBench, a benchmark for circuit explanation built from 84 semi-synthetic transformer circuits with 163 component-level annotations. We propose HyVE (Hypothesize, Validate, Explain), an agentic explainer that analyzes each component through an iterative loop of observation, hypothesis generation, and causal validation, eventually producing a component-level explanation and a circuit-level task description. Across four LM backbones, HyVE recovers useful component- and task-level explanations, but no backbone is uniformly best. Our analysis shows that strong backbones usually form observation-grounded hypotheses, while failures more often arise later in the validation loop, through incomplete validation plans, code execution errors, or unresolved hypotheses. A case study on an arithmetic circuit in Llama-3-8B shows that the same formulation can extend beyond semi-synthetic benchmarks to naturally trained models. Overall, LM agents are promising circuit explainers, but reliable validation remains the key obstacle.

Coding agents have become a major mode of software engineering, but the benchmarks we use to compare them were designed in a pre-agent era: they collapse model, harness, and environment into a single end-to-end score, typically computed against one reference solution, with no component-level signal for iteration. We argue that current coding benchmarks are misaligned with agentic software engineering. A coding agent in practice is not a model: it is a system harness -- a composite of models, harnesses, contexts, environments, and feedback signals, any one of which can move the benchmark score by margins comparable to those between adjacent model generations. We discuss three symptoms: (i) benchmark scores conflate the model with the rest of the harness; (ii) grading against a single reference solution penalises equally valid alternatives; and (iii) the absence of signal at the level of individual harness components makes the end-to-end system score difficult to iterate on.

The Environment-Aware Speech and Sound Deepfake Detection Challenge (ESDD2), held in conjunction with ICME 2026, evaluated systems for five component-level audio spoofing detection, where speech and environmental sounds may be manipulated independently or jointly. After the challenge concludes, we analyze the final leaderboard and summarize effective design choices from the top-performing submissions. The challenge attracted 94 registrations from 16 countries; after verification of submission requirements and metadata, 13 teams were retained for the final analysis. On the test set, the best system achieved a Macro-F1 score of 0.8775, substantially outperforming the separation-enhanced joint learning baseline (0.6327). Top systems consistently benefited from modular task decomposition, cross-domain self-supervised encoders, targeted data augmentation, and selective ensembling rather than simple model scaling. At the same time, auxiliary EER analyses reveal persistent difficulty in detecting the spoofed environmental component and in generalizing to unseen generators in the test set. This paper reports challenge results and provides insights for future environment-aware deepfake detection research. The CompSpoofV2 dataset and baseline code remain publicly available for reproducibility.

Large language model agents have made substantial progress in code generation, yet most existing systems assume a predefined repository architecture. This assumption does not hold in zero-to-all code generation, where an agent must construct an entire software project directly from natural-language requirements while maintaining a modular repository architecture throughout development. We present Repo0, a continuous structural evolution framework for zero-to-all code generation. Repo0 maintains an explicit architectural state instantiated as a Dual-Directed-Acyclic-Graph (Dual-DAG), consisting of a requirement-level DAG, a component-level DAG, and their alignment relation. Starting from natural-language requirements, it iteratively evolves component boundaries through structural actions guided by modularity metrics until structural convergence, after which the converged architecture guides test-driven development code generation. We evaluate Repo0 on six real-world repositories from RepoCraft using GPT-5 mini and DeepSeek V3.2. Repo0 achieves the highest Functionality Coverage and Pass Rate across all settings. Compared with RPG, the strongest repository-planning baseline, Repo0 improves Functionality Coverage by up to 20.08 percentage points and Pass Rate by up to 29.74 percentage points. Ablation and structural-evolution analyses further demonstrate the importance of the Dual-DAG architectural state, modularity-guided structural evolution, and explicit structural convergence.

Large language model (LLM) agents increasingly operate through long-horizon trajectories involving user instructions, tool use, external observations, and memory. Existing benchmarks primarily evaluate behavioral outcomes but provide limited support for fine-grained attribution analysis. We introduce trajectory attribution and develop a benchmark and annotation framework for this task. The benchmark organizes heterogeneous trajectories under a unified component schema and provides annotations of the primary attribution component, together with attack and execution chains where applicable. Instantiating the benchmark with trajectories from AgentDojo and the Stage and Canary settings of Agent3Sigma yields more than 1,300 annotated trajectories covering task-aligned actions, unsafe actions, and safety refusals. The benchmark defines two evaluation tasks, primary attribution localization and attribution-chain recovery, and provides reference baselines based on incremental trajectory contribution and component-level leave-one-out perturbation. It captures diverse attribution settings, including local and long-range attribution as well as structured attribution chains. Reference baseline results exhibit substantial performance differences across these settings, providing an initial characterization of the benchmark's attribution challenges. Beyond this initial instantiation, we release a reusable annotation skill that enables trajectories generated by new agent models to be standardized, annotated, and evaluated under the same framework. Project resources and future releases are available at https://github.com/chenjing-2024/agent-trajectory-attribution.

Vision-language models must reconcile visual evidence with memorized world knowledge when the two conflict. How they resolve this conflict shapes the reliability of multimodal systems, yet prior work characterizes it behaviorally without a component-level causal account. We combine activation patching across three granularities (residual stream, attention heads, and MLP sublayers) with model-component ablation studies and mechanistic analysis. Across three VLM families, we find that visual grounding emerges by default, whereas prior grounding depends on a small set of causally necessary attention heads (2.5-4.8%) concentrated in the second half of the network. These heads enable answers from stored world knowledge (e.g., "red" for a strawberry) despite conflicting visual input. Ablating them flips predictions from knowledge-grounded to visually grounded answers in 68-96% of cases under prior-knowledge prompts, but changes only 0.8-7.5% of visually grounded predictions, establishing an asymmetric causal structure. The identified heads decompose into routing heads, which modulate information flow, and writing heads, which directly project answer tokens into the residual stream. This structure is consistent across model families and scales, revealing a sparse causal circuit underlying perception-knowledge conflict in VLMs.

Large language model compression has made substantial progress through pruning, quantization, and low-rank decomposition, yet a fundamental limitation persists across all existing methods: compression budgets are allocated without any representation of what individual model components functionally encode. We term this the capability-blind compression problem and argue it is a root cause of two well-documented failures -- the insensitivity of perplexity-based evaluation to reasoning capability loss, and the abrupt phase transitions in model performance recently characterized by Ma et al. (2026). We propose Capability-Guided Compression (CGC), a framework that addresses this by using Sparse Autoencoder (SAE)-derived capability density maps to allocate differential compression budgets across transformer components. Capability density is a formally defined scalar measure combining the feature breadth, activation entropy, and cross-input consistency of a component's SAE feature activation distribution. We prove theoretically that components with higher capability density exhibit lower structural redundancy and reach their individual phase transition points at lower compression ratios, providing the first pre-compression mechanism for component-level phase transition prediction. Experiments on GPT-2 Medium confirm that capability density is statistically independent of Wanda importance scores (Spearman rho = -0.054, n = 384 heads), establishing it as a genuinely novel compression signal orthogonal to all existing importance metrics. We report a negative result on PPL-based compression comparison and provide a principled diagnosis identifying GPT-2 Medium as an insufficient test bed for the full CGC hypothesis. The theoretical framework, density formalism, and orthogonality finding constitute a foundation for capability-aware compression research.

Large language models (LLMs) are increasingly embedded in educational, professional, and public infrastructure, yet widely used platforms expose "English (US)" as a primary English setting despite the global diversity of English. We ask: How does "English (US)" become the default? We study this question as structural bias, examining how geopolitical histories of data curation, digital dominance, and linguistic standardization intersect with the LLM development pipeline. Using British English as a controlled reference, we construct a curated resource of 1,813 matched American English (AmE)--British English (BrE) variants and introduce DiAlign, a dynamic, training-free method for estimating regional alignment from distributional evidence. We triangulate the AmE preference across data exposure --> representation --> generation, jointly examining pretraining and post-training data, tokenizer behavior and provenance, model prediction cost, and generated language across developer countries, prompt conditions, domains and sources, linguistic categories, and registers. AmE is consistently favored across all six audited pretraining corpora and 21 post-training datasets, is generally represented more compactly by tokenizers, and receives lower prediction cost. It also remains the dominant generation default under neutral English prompting; British-English prompting shifts this preference toward BrE but does not consistently eliminate the AmE default. To our knowledge, this is the first rigorous pipeline-wide study of structural bias across major phases of LLM development. Our findings show that contemporary LLMs privilege AmE as the de facto norm, raising concerns about linguistic homogenization, epistemic injustice, and inequity in global AI deployment, while providing a rigorous basis for targeted component-level intervention.

We introduce 3DCodeVerse, a research ecosystem that enables coding agents to create editable and verifiable 3D content at scale. 3DCodeVerse comprises large-scale, high-quality datasets of executable 3D code, a coding harness for spatial reasoning and automated verification, and practical guidance for 3D coding. First, we construct 3DCodeVerse-2M, a large-scale curated dataset of standalone 3D executable code. We build this corpus by collecting open-source data, converting specialized representations, and generating new programs with coding agents. Each program is packaged with the source files and associated assets required for execution in its declared environment, along with available descriptions and verification records. Second, we develop the 3DCodeVerse Harness, a multi-agent directed acyclic graph framework for generating and refining 3D content. It uses execution checks, spatial measurements, and visual feedback to automatically evaluate and revise generated programs without human feedback during generation. Third, we conduct systematic empirical studies of 3D coding, establishing baselines with fine-tuned open models and deriving practical guidance through component-level analyses of our harness. Extensive experiments demonstrate that fine-tuning on our dataset significantly improves the 3D coding capabilities of open-source models. Notably, our 3DCodeVerse harness achieves a 90% win rate against Claude Design (3D Object) in pairwise human evaluations, when both are utilized by Claude Opus 5.5.

A critical aspect of power systems research is the availability of suitable data, access to which is limited by privacy concerns and the sensitive nature of energy infrastructure. This lack of data, in turn, hinders the development of modern research avenues such as machine learning approaches or stochastic formulations. To overcome this challenge, this paper proposes a systematic, data-driven framework for reconstructing high-fidelity time series, using publicly-available grid snapshots and historical data published by transmission system operators. The proposed approach, from geo-spatial data and generation capacity reconstruction, to time series disaggregation, is applied to the French transmission grid. Thereby, synthetic but highly realistic time series data, spanning multiple years with a 5-minute granularity, is generated at the individual component level.

Designing user interfaces (UIs) is a critical step when launching products, building portfolios, or personalizing projects, yet end users without design expertise often struggle to articulate their intent and to trust design choices. Existing example-based tools either promote broad exploration, which can cause overwhelm and design drift, or require adapting a single example, risking design fixation. We present UI Remix, an interactive system that supports mobile UI design through an example-driven design workflow. Powered by a multimodal retrieval-augmented generation (MMRAG) model, UI Remix enables iterative search, selection, and adaptation of examples at both the global (whole interface) and local (component) level. To foster trust, it presents source transparency cues such as ratings, download counts, and developer information. In an empirical study with 24 end users, UI Remix significantly improved participants' ability to achieve their design goals, facilitated effective iteration, and encouraged exploration of alternative designs. Participants also reported that source transparency cues enhanced their confidence in adapting examples. Our findings suggest new directions for AI-assisted, example-driven systems that empower end users to design with greater control, trust, and openness to exploration.

LLM agents combine models with execution harnesses, so agentic benchmark performance reflects their joint behavior. We argue that harnesses should therefore be evaluated through their interactions with underlying models. We develop a framework combining five complementary measures: (i) Valid Completion Rate (VCR), how reliably agents finish normally and deliver evaluable results, irrespective of task correctness; (ii) Model-Harness Fit, how well a harness supports task achievement through valid completion for a given model; (iii) Cross-Model Fit, a harness's overall suitability across evaluated models; (iv) Interaction Residuals, pairing-specific execution strengths and weaknesses hidden by component-level summaries; and (v) Token Load, the token demands of agent execution, including failed attempts. We evaluate four general-purpose harnesses (OpenCode, Codex CLI, Pi CLI, and DeepAgents) with four core models, plus two fixed native model-harness systems, on six benchmarks covering context management, tool use, long-context planning, multimodal interaction, and artifact handoff. Including native references and stress conditions, 111 evaluation settings yield 52,168 trajectories. Harness rankings vary across models and benchmarks; task performance and valid completion can favor different pairings, and similar task scores can accompany distinct execution profiles. OpenCode ranks first in cross-model performance, while DeepSeek V4 Flash Preview maintains consistently high Mean VCR across harnesses on the shared four-benchmark panel. These findings support evaluating model-harness interactions, training transferable harness-use capabilities in models, and harness designs adapted to the model and task.

Learning control policies for complex, long-horizon tasks is a central challenge in robotics and autonomous systems. Signal Temporal Logic (STL) offers a powerful and expressive language for specifying such tasks, but its non-Markovian nature and inherent sparse reward make it difficult to be solved via standard Reinforcement Learning (RL) algorithms. Prior RL approaches focus only on limited STL fragments or use STL robustness scores as sparse terminal rewards. In this paper, we propose TGPO, Temporal Grounded Policy Optimization, to solve general STL tasks. TGPO decomposes STL into timed subgoals and invariant constraints and provides a hierarchical framework to tackle the problem. The high-level component of TGPO proposes concrete time allocations for these subgoals, and the low-level time-conditioned policy learns to achieve the sequenced subgoals using a dense, stage-wise reward signal. During inference, we sample various time allocations and select the most promising assignment for the policy network to rollout the solution trajectory. To foster efficient policy learning for complex STL with multiple subgoals, we leverage the learned critic to guide the high-level temporal search via Metropolis-Hastings sampling, focusing exploration on temporally feasible solutions. We conduct experiments on five environments, ranging from low-dimensional navigation to manipulation, drone, and quadrupedal locomotion. Under a wide range of STL tasks, TGPO significantly outperforms state-of-the-art baselines (especially for high-dimensional and long-horizon cases), with an average of 31.6% improvement in task success rate compared to the best baseline. The code will be available at https://github.com/mengyuest/TGPO

The integration of Supernumerary Limbs (SLs) on humanoid robots poses a significant stability challenge due to the dynamic perturbations they introduce. This thesis addresses this issue by designing a novel hierarchical control architecture to improve humanoid locomotion stability with SLs. The core of this framework is a decoupled strategy that combines learning-based locomotion with model-based balancing. The low-level component consists of a walking gait for a Unitree H1 humanoid through imitation learning and curriculum learning. The high-level component actively utilizes the SLs for dynamic balancing. The effectiveness of the system is evaluated in a physics-based simulation under three conditions: baseline gait for an unladen humanoid (baseline walking), walking with a static SL payload (static payload), and walking with the active dynamic balancing controller (dynamic balancing). Our evaluation shows that the dynamic balancing controller improves stability. Compared to the static payload condition, the balancing strategy yields a gait pattern closer to the baseline and decreases the Dynamic Time Warping (DTW) distance of the CoM trajectory by 47\%. The balancing controller also improves the re-stabilization within gait cycles and achieves a more coordinated anti-phase pattern of Ground Reaction Forces (GRF). The results demonstrate that a decoupled, hierarchical design can effectively mitigate the internal dynamic disturbances arising from the mass and movement of the SLs, enabling stable locomotion for humanoids equipped with functional limbs. Code and videos are available here: https://github.com/heyzbw/HuSLs.

Current coding-agent benchmarks usually pro- vide the full task specification upfront. Real research coding often does not: the intended system is progressively disclosed through in- teraction, requiring the agent to track durable design commitments across a long session. We introduce a benchmark for this setting and study faithfulne Ss Loss U nder eM ergent s Pecification (SLUMP), defined as the reduc- tion in final implementation faithfulness un- der emergent specification relative to a single- shot specification control. The benchmark con- tains 20 recent ML papers (10 ICML 2025, 10 NeurIPS 2025), 371 atomic verifiable compo- nents, and interaction scripts of approximately 60 coding requests that progressively disclose the target design without revealing the paper itself. Final repositories are scored with a five-level component-faithfulness rubric and accompanied by an exposure audit to verify that scored components are recoverable from the visible interaction. Evaluated on Claude Code and Codex, the single-shot specification control achieves higher overall implementation fidelity on 16/20 and 14/20 papers, respectively. Structural integration degrades under emergent specification on both platforms, while seman- tic faithfulness loss is substantial on Claude Code and small on Codex. As a mitigation case study, we introduce ProjectGuard, an exter- nal project-state layer for specification tracking. On Claude Code, ProjectGuard recovers 90% of the faithfulness gap, increases fully faith- ful components from 118 to 181, and reduces severe failures from 72 to 49. These results identify specification tracking as a distinct eval- uation target for long-horizon coding agents.

The rise of Large Language Models (LLMs) has streamlined frontend interface creation through tools like Vercel's V0, yet surfaced challenges in design quality (e.g., accessibility, and usability). Current solutions, often limited by their focus, generalisability, or data dependency, fall short in addressing these complexities. Moreover, none of them examine the quality of LLM-generated UI design. In this work, we introduce DesignRepair, a novel dual-stream design guideline-aware system to examine and repair the UI design quality issues from both code aspect and rendered page aspect. We utilised the mature and popular Material Design as our knowledge base to guide this process. Specifically, we first constructed a comprehensive knowledge base encoding Google's Material Design principles into low-level component knowledge base and high-level system design knowledge base. After that, DesignRepair employs a LLM for the extraction of key components and utilizes the Playwright tool for precise page analysis, aligning these with the established knowledge bases. Finally, we integrate Retrieval-Augmented Generation with state-of-the-art LLMs like GPT-4 to holistically refine and repair frontend code through a strategic divide and conquer approach. Our extensive evaluations validated the efficacy and utility of our approach, demonstrating significant enhancements in adherence to design guidelines, accessibility, and user experience metrics.

Simulated humanoids are an appealing research domain due to their physical capabilities. Nonetheless, they are also challenging to control, as a policy must drive an unstable, discontinuous, and high-dimensional physical system. One widely studied approach is to utilize motion capture (MoCap) data to teach the humanoid agent low-level skills (e.g., standing, walking, and running) that can then be re-used to synthesize high-level behaviors. However, even with MoCap data, controlling simulated humanoids remains very hard, as MoCap data offers only kinematic information. Finding physical control inputs to realize the demonstrated motions requires computationally intensive methods like reinforcement learning. Thus, despite the publicly available MoCap data, its utility has been limited to institutions with large-scale compute. In this work, we dramatically lower the barrier for productive research on this topic by training and releasing high-quality agents that can track over three hours of MoCap data for a simulated humanoid in the dm_control physics-based environment. We release MoCapAct (Motion Capture with Actions), a dataset of these expert agents and their rollouts, which contain proprioceptive observations and actions. We demonstrate the utility of MoCapAct by using it to train a single hierarchical policy capable of tracking the entire MoCap dataset within dm_control and show the learned low-level component can be re-used to efficiently learn downstream high-level tasks. Finally, we use MoCapAct to train an autoregressive GPT model and show that it can control a simulated humanoid to perform natural motion completion given a motion prompt. Videos of the results and links to the code and dataset are available at https://microsoft.github.io/MoCapAct.

Pre-trained language models (PLMs) have driven substantial progress in natural language processing but remain vulnerable to adversarial attacks, raising concerns about their robustness in real-world applications. Previous studies have sought to mitigate the impact of adversarial attacks by introducing adversarial perturbations into the training process, either implicitly or explicitly. While both strategies enhance robustness, they often incur high computational costs. In this work, we propose a simple yet effective add-on module that enhances the adversarial robustness of PLMs by removing instance-level principal components, without relying on conventional adversarial defences or perturbing the original training data. Our approach transforms the embedding space to approximate Gaussian properties, thereby reducing its susceptibility to adversarial perturbations while preserving semantic relationships. This transformation aligns embedding distributions in a way that minimises the impact of adversarial noise on decision boundaries, enhancing robustness without requiring adversarial examples or costly training-time augmentation. Evaluations on eight benchmark datasets show that our approach improves adversarial robustness while maintaining comparable before-attack accuracy to baselines, achieving a balanced trade-off between robustness and generalisation.

Automated detection of defects in Printed Circuit Board (PCB) manufacturing using Solder Paste Inspection (SPI) and Automated Optical Inspection (AOI) machines can help improve operational efficiency and significantly reduce the need for manual intervention. In this paper, using SPI-extracted features of 6 million pins, we demonstrate a data-centric approach to train Machine Learning (ML) models to detect PCB defects at three stages of PCB manufacturing. The 6 million PCB pins correspond to 2 million components that belong to 15,387 PCBs. Using a base extreme gradient boosting (XGBoost) ML model, we iterate on the data pre-processing step to improve detection performance. Combining pin-level SPI features using component and PCB IDs, we developed training instances also at the component and PCB level. This allows the ML model to capture any inter-pin, inter-component, or spatial effects that may not be apparent at the pin level. Models are trained at the pin, component, and PCB levels, and the detection results from the different models are combined to identify defective components.

Roman Urdu is an informal form of the Urdu language written in Roman script, which is widely used in South Asia for online textual content. It lacks standard spelling and hence poses several normalization challenges during automatic language processing. In this article, we present a feature-based clustering framework for the lexical normalization of Roman Urdu corpora, which includes a phonetic algorithm UrduPhone, a string matching component, a feature-based similarity function, and a clustering algorithm Lex-Var. UrduPhone encodes Roman Urdu strings to their pronunciation-based representations. The string matching component handles character-level variations that occur when writing Urdu using Roman script.

To facilitate the transformation of legacy finite difference implementations into the Devito environment, this study develops an integrated AI agent framework. Retrieval-Augmented Generation (RAG) and open-source Large Language Models are combined through multi-stage iterative workflows in the system's hybrid LangGraph architecture. The agent constructs an extensive Devito knowledge graph through document parsing, structure-aware segmentation, extraction of entity relationships, and Leiden-based community detection. GraphRAG optimisation enhances query performance across semantic communities that include seismic wave simulation, computational fluid dynamics, and performance tuning libraries. A reverse engineering component derives three-level query strategies for RAG retrieval through static analysis of Fortran source code. To deliver precise contextual information for language model guidance, the multi-stage retrieval pipeline performs parallel searching, concept expansion, community-scale retrieval, and semantic similarity analysis. Code synthesis is governed by Pydantic-based constraints to guarantee structured outputs and reliability. A comprehensive validation framework integrates conventional static analysis with the G-Eval approach, covering execution correctness, structural soundness, mathematical consistency, and API compliance. The overall agent workflow is implemented on the LangGraph framework and adopts concurrent processing to support quality-based iterative refinement and state-aware dynamic routing. The principal contribution lies in the incorporation of feedback mechanisms motivated by reinforcement learning, enabling a transition from static code translation toward dynamic and adaptive analytical behavior.

We present Darwin Family, a framework for training-free evolutionary merging of large language models via gradient-free weight-space recombination. We ask whether frontier-level reasoning performance can be improved without additional training, by reorganizing latent capabilities already encoded in existing checkpoints. Darwin introduces three key ideas: (i) a 14-dimensional adaptive merge genome enabling fine-grained component- and block-level recombination; (ii) MRI-Trust Fusion, which adaptively balances diagnostic layer-importance signals with evolutionary search through a learnable trust parameter; and (iii) an Architecture Mapper that enables cross-architecture breeding between heterogeneous model families. Empirically, the flagship Darwin-27B-Opus achieves 86.9% on GPQA Diamond, ranking #6 among 1,252 evaluated models, and outperforming its fully trained foundation model without any gradient-based training. Across scales from 4B to 35B parameters, Darwin models consistently improve over their parents, support recursive multi-generation evolution, and enable a training-free evolutionary merge that combines Transformer- and Mamba-based components. Together, the Darwin Family demonstrates that diagnostic-guided evolutionary merging is a practical and reproducible alternative to costly post-training pipelines for reasoning-centric language models.

We propose new static word embeddings optimised for sentence semantic representation. We first extract word embeddings from a pre-trained Sentence Transformer, and improve them with sentence-level principal component analysis, followed by either knowledge distillation or contrastive learning. During inference, we represent sentences by simply averaging word embeddings, which requires little computational cost. We evaluate models on both monolingual and cross-lingual tasks and show that our model substantially outperforms existing static models on sentence semantic tasks, and even rivals a basic Sentence Transformer model (SimCSE) on some data sets. Lastly, we perform a variety of analyses and show that our method successfully removes word embedding components that are irrelevant to sentence semantics, and adjusts the vector norms based on the influence of words on sentence semantics.

In multiplayer, first-person shooter games like Counter-Strike: Global Offensive (CS:GO), coordinated movement is a critical component of high-level strategic play. However, the complexity of team coordination and the variety of conditions present in popular game maps make it impractical to author hand-crafted movement policies for every scenario. We show that it is possible to take a data-driven approach to creating human-like movement controllers for CS:GO. We curate a team movement dataset comprising 123 hours of professional game play traces, and use this dataset to train a transformer-based movement model that generates human-like team movement for all players in a "Retakes" round of the game. Importantly, the movement prediction model is efficient. Performing inference for all players takes less than 0.5 ms per game step (amortized cost) on a single CPU core, making it plausible for use in commercial games today. Human evaluators assess that our model behaves more like humans than both commercially-available bots and procedural movement controllers scripted by experts (16% to 59% higher by TrueSkill rating of "human-like"). Using experiments involving in-game bot vs. bot self-play, we demonstrate that our model performs simple forms of teamwork, makes fewer common movement mistakes, and yields movement distributions, player lifetimes, and kill locations similar to those observed in professional CS:GO match play.

Diffusion-based large language models (dLLMs) have emerged as a promising alternative to autoregressive (AR) LLMs, leveraging denoising-based generation to enable inherent parallelism. Even more and more open-sourced dLLM models emerge, yet their widespread adoption remains constrained by the lack of a standardized and efficient inference framework. We present dInfer, an efficient and extensible framework for dLLM inference. dInfer decomposes the inference pipeline into four modular components--model, diffusion iteration manager, decoding strategy, and KV-cache manager--and integrates novel algorithms for each component alongside system-level optimizations. Through this combination of algorithmic innovations and system enhancements, dInfer achieves substantial efficiency gains without compromising output quality on LLaDA-MoE. At batch size 1, it surpasses 1,100 tokens per second on HumanEval and averages over 800 tokens per second across six benchmarks on 8times H800 GPUs. Compared to prior systems, dInfer delivers a 10times speedup over Fast-dLLM while maintaining similar model performance. Even compared to the AR model (with a comparable number of activation parameters and performance) QWen2.5-3B, which is highly optimized with the latest vLLM inference engine, dInfer still delivers a 2-3times speedup. The implementation of dInfer is open-sourced at https://github.com/inclusionAI/dInfer.

Harnesses are now central to coding-agent performance, mediating how models interact with tools and execution environments. Yet harness engineering remains a manual craft, because automating it faces a heterogeneous action space across editable components, voluminous trajectories that bury actionable signal, and edits whose effect is hard to attribute. We introduce Agentic Harness Engineering (AHE), a closed loop that addresses these challenges through three matched observability pillars: (1) component observability gives every editable harness component a file-level representation so the action space is explicit and revertible; (2) experience observability distills millions of raw trajectory tokens into a layered, drill-down evidence corpus that an evolving agent can actually consume; and (3) decision observability pairs every edit with a self-declared prediction, later verified against the next round's task-level outcomes. Together, these pillars turn every edit into a falsifiable contract, so harness evolution proceeds autonomously without collapsing into trial-and-error. Empirically, ten AHE iterations lift pass@1 on Terminal-Bench 2 from 69.7% to 77.0%, surpassing the human-designed harness Codex-CLI (71.9%) and the self-evolving baselines ACE and TF-GRPO. The frozen harness transfers without re-evolution: on SWE-bench-verified it tops aggregate success at 12% fewer tokens than the seed, and on Terminal-Bench 2 it yields +5.1 to +10.1pp cross-family gains across three alternate model families, indicating the evolved components encode general engineering experience rather than benchmark-specific tuning. Ablations localize the gain to tools, middleware, and long-term memory rather than the system prompt, suggesting factual harness structure transfers while prose-level strategy does not.

Visual instruction tuning is crucial for advancing the vision-language alignment and instruction-following capabilities of Vision-Language Models (VLMs). However, identifying optimal subsets under a fixed ratio constraint from rapidly expanding datasets remains a significant bottleneck. While existing methods largely depend on distribution diversity or heuristic filtering, they often overlook the internal coherence within individual samples. To bridge this gap, we propose Data Intrinsic Consistency (DIC), a self-scoring metric designed to quantify the sample-level inter-component consistency. DIC consists of two modules: Visual Information Consistency (VIC), evaluating the alignment between visual content and instructions, and Response Information Consistency (RIC), assessing response coherence relative to the instruction. Building upon DIC, we introduce Data Intrinsic Consistency Selection (DICS), an adaptive data selection method that optimizes the trade-off between high intra-sample consistency and global distributional diversity under varying data budgets. Extensive experiments demonstrate that DICS consistently outperforms state-of-the-art methods across diverse dataset scales and model architectures, surpassing full-dataset fine-tuning while using only 25% of the LLaVA-1.5-665K data. We further curate DICS-6M, a 6M-sample multi-modal instruction corpus that enables the largest-scale visual instruction selection study to date; remarkably, DICS reaches 94.52\% of the official InternVL3-8B-Instruct performance using less than 25\% of its reported training data. Code can be seen at https://github.com/cqu-student/DICS

Tool-augmented LLM agents increasingly rely on multi-step, multi-tool workflows to complete real tasks. This design expands the attack surface, because data produced by one tool can be persisted and later reused as input to another tool, enabling exploitable source-to-sink dataflows that only emerge through tool composition. We study this risk as multi-tool vulnerabilities in LLM agents, and show that existing discovery efforts focused on single-tool or single-hop testing miss these long-horizon behaviors and provide limited debugging value. We present ChainFuzzer, a greybox framework for discovering and reproducing multi-tool vulnerabilities with auditable evidence. ChainFuzzer (i) identifies high-impact operations with strict source-to-sink dataflow evidence and extracts plausible upstream candidate tool chains based on cross-tool dependencies, (ii) uses Trace-guided Prompt Solving (TPS) to synthesize stable prompts that reliably drive the agent to execute target chains, and (iii) performs guardrail-aware fuzzing to reproduce vulnerabilities under LLM guardrails via payload mutation and sink-specific oracles. We evaluate ChainFuzzer on 20 popular open-source LLM agent apps (998 tools). ChainFuzzer extracts 2,388 candidate tool chains and synthesizes 2,213 stable prompts, confirming 365 unique, reproducible vulnerabilities across 19/20 apps (302 require multi-tool execution). Component evaluation shows tool-chain extraction achieves 96.49% edge precision and 91.50% strict chain precision; TPS increases chain reachability from 27.05% to 95.45%; guardrail-aware fuzzing boosts payload-level trigger rate from 18.20% to 88.60%. Overall, ChainFuzzer achieves 3.02 vulnerabilities per 1M tokens, providing a practical foundation for testing and hardening real-world multi-tool agent systems.

Recovering high-quality 3D scenes from a single RGB image is a challenging task in computer graphics. Current methods often struggle with domain-specific limitations or low-quality object generation. To address these, we propose CAST (Component-Aligned 3D Scene Reconstruction from a Single RGB Image), a novel method for 3D scene reconstruction and recovery. CAST starts by extracting object-level 2D segmentation and relative depth information from the input image, followed by using a GPT-based model to analyze inter-object spatial relationships. This enables the understanding of how objects relate to each other within the scene, ensuring more coherent reconstruction. CAST then employs an occlusion-aware large-scale 3D generation model to independently generate each object's full geometry, using MAE and point cloud conditioning to mitigate the effects of occlusions and partial object information, ensuring accurate alignment with the source image's geometry and texture. To align each object with the scene, the alignment generation model computes the necessary transformations, allowing the generated meshes to be accurately placed and integrated into the scene's point cloud. Finally, CAST incorporates a physics-aware correction step that leverages a fine-grained relation graph to generate a constraint graph. This graph guides the optimization of object poses, ensuring physical consistency and spatial coherence. By utilizing Signed Distance Fields (SDF), the model effectively addresses issues such as occlusions, object penetration, and floating objects, ensuring that the generated scene accurately reflects real-world physical interactions. CAST can be leveraged in robotics, enabling efficient real-to-simulation workflows and providing realistic, scalable simulation environments for robotic systems.

Subword-level models have been the dominant paradigm in NLP. However, character-level models have the benefit of seeing each character individually, providing the model with more detailed information that ultimately could lead to better models. Recent works have shown character-level models to be competitive with subword models, but costly in terms of time and computation. Character-level models with a downsampling component alleviate this, but at the cost of quality, particularly for machine translation. This work analyzes the problems of previous downsampling methods and introduces a novel downsampling method which is informed by subwords. This new downsampling method not only outperforms existing downsampling methods, showing that downsampling characters can be done without sacrificing quality, but also leads to promising performance compared to subword models for translation.

Humanoids hold great potential for service, industrial, and rescue applications, in which robots must sustain whole-body stability while performing intense, contact-rich interactions with the environment. However, enabling humanoids to generate human-like, adaptive responses under such conditions remains a major challenge. To address this, we propose Thor, a humanoid framework for human-level whole-body reactions in contact-rich environments. Based on the robot's force analysis, we design a force-adaptive torso-tilt (FAT2) reward function to encourage humanoids to exhibit human-like responses during force-interaction tasks. To mitigate the high-dimensional challenges of humanoid control, Thor introduces a reinforcement learning architecture that decouples the upper body, waist, and lower body. Each component shares global observations of the whole body and jointly updates its parameters. Finally, we deploy Thor on the Unitree G1, and it substantially outperforms baselines in force-interaction tasks. Specifically, the robot achieves a peak pulling force of 167.7 N (approximately 48% of the G1's body weight) when moving backward and 145.5 N when moving forward, representing improvements of 68.9% and 74.7%, respectively, compared with the best-performing baseline. Moreover, Thor is capable of pulling a loaded rack (130 N) and opening a fire door with one hand (60 N). These results highlight Thor's effectiveness in enhancing humanoid force-interaction capabilities.

Radiology is a vital and complex component of modern clinical workflow and covers many tasks. Recently, vision-language (VL) foundation models in medicine have shown potential in processing multimodal information, offering a unified solution for various radiology tasks. However, existing studies either pre-trained VL models on natural data or did not fully integrate vision-language architecture and pretraining, often neglecting the unique multimodal complexity in radiology images and their textual contexts. Additionally, their practical applicability in real-world scenarios remains underexplored. Here, we present RadFound, a large and open-source vision-language foundation model tailored for radiology, that is trained on the most extensive dataset of over 8.1 million images and 250,000 image-text pairs, covering 19 major organ systems and 10 imaging modalities. To establish expert-level multimodal perception and generation capabilities, RadFound introduces an enhanced vision encoder to capture intra-image local features and inter-image contextual information, and a unified cross-modal learning design tailored to radiology. To fully assess the models' capability, we construct a benchmark, RadVLBench, including radiology interpretation tasks like medical vision-language question-answering, as well as text generation tasks ranging from captioning to report generation. We also propose a human evaluation framework. When evaluated on the real-world benchmark involving three representative modalities, 2D images (chest X-rays), multi-view images (mammograms), and 3D images (thyroid CT scans), RadFound significantly outperforms other VL foundation models on both quantitative metrics and human evaluation. In summary, the development of RadFound represents an advancement in radiology generalists, demonstrating broad applicability potential for integration into clinical workflows.

Self-supervised representation learning has proved to be a valuable component for out-of-distribution (OoD) detection with only the texts of in-distribution (ID) examples. These approaches either train a language model from scratch or fine-tune a pre-trained language model using ID examples, and then take the perplexity output by the language model as OoD scores. In this paper, we analyze the complementary characteristics of both OoD detection methods and propose a multi-level knowledge distillation approach that integrates their strengths while mitigating their limitations. Specifically, we use a fine-tuned model as the teacher to teach a randomly initialized student model on the ID examples. Besides the prediction layer distillation, we present a similarity-based intermediate layer distillation method to thoroughly explore the representation space of the teacher model. In this way, the learned student can better represent the ID data manifold while gaining a stronger ability to map OoD examples outside the ID data manifold with the regularization inherited from pre-training. Besides, the student model sees only ID examples during parameter learning, further promoting more distinguishable features for OoD detection. We conduct extensive experiments over multiple benchmark datasets, i.e., CLINC150, SST, ROSTD, 20 NewsGroups, and AG News; showing that the proposed method yields new state-of-the-art performance. We also explore its application as an AIGC detector to distinguish between answers generated by ChatGPT and human experts. It is observed that our model exceeds human evaluators in the pair-expert task on the Human ChatGPT Comparison Corpus.

In this paper, we present a large-scale Diverse Real-world image Super-Resolution dataset, i.e., DRealSR, as well as a divide-and-conquer Super-Resolution (SR) network, exploring the utility of guiding SR model with low-level image components. DRealSR establishes a new SR benchmark with diverse real-world degradation processes, mitigating the limitations of conventional simulated image degradation. In general, the targets of SR vary with image regions with different low-level image components, e.g., smoothness preserving for flat regions, sharpening for edges, and detail enhancing for textures. Learning an SR model with conventional pixel-wise loss usually is easily dominated by flat regions and edges, and fails to infer realistic details of complex textures. We propose a Component Divide-and-Conquer (CDC) model and a Gradient-Weighted (GW) loss for SR. Our CDC parses an image with three components, employs three Component-Attentive Blocks (CABs) to learn attentive masks and intermediate SR predictions with an intermediate supervision learning strategy, and trains an SR model following a divide-and-conquer learning principle. Our GW loss also provides a feasible way to balance the difficulties of image components for SR. Extensive experiments validate the superior performance of our CDC and the challenging aspects of our DRealSR dataset related to diverse real-world scenarios. Our dataset and codes are publicly available at https://github.com/xiezw5/Component-Divide-and-Conquer-for-Real-World-Image-Super-Resolution

We present a data-driven, end-to-end approach to transaction-based dialog systems that performs at near-human levels in terms of verbal response quality and factual grounding accuracy. We show that two essential components of the system produce these results: a sufficiently large and diverse, in-domain labeled dataset, and a neural network-based, pre-trained model that generates both verbal responses and API call predictions. In terms of data, we introduce TicketTalk, a movie ticketing dialog dataset with 23,789 annotated conversations. The movie ticketing conversations range from completely open-ended and unrestricted to more structured, both in terms of their knowledge base, discourse features, and number of turns. In qualitative human evaluations, model-generated responses trained on just 10,000 TicketTalk dialogs were rated to "make sense" 86.5 percent of the time, almost the same as human responses in the same contexts. Our simple, API-focused annotation schema results in a much easier labeling task making it faster and more cost effective. It is also the key component for being able to predict API calls accurately. We handle factual grounding by incorporating API calls in the training data, allowing our model to learn which actions to take and when. Trained on the same 10,000-dialog set, the model's API call predictions were rated to be correct 93.9 percent of the time in our evaluations, surpassing the ratings for the corresponding human labels. We show how API prediction and response generation scores improve as the dataset size incrementally increases from 5000 to 21,000 dialogs. Our analysis also clearly illustrates the benefits of pre-training. We are publicly releasing the TicketTalk dataset with this paper to facilitate future work on transaction-based dialogs.

Wikipedia is the largest open knowledge corpus, widely used worldwide and serving as a key resource for training large language models (LLMs) and retrieval-augmented generation (RAG) systems. Ensuring its accuracy is therefore critical. But how accurate is Wikipedia, and how can we improve it? We focus on inconsistencies, a specific type of factual inaccuracy, and introduce the task of corpus-level inconsistency detection. We present CLAIRE, an agentic system that combines LLM reasoning with retrieval to surface potentially inconsistent claims along with contextual evidence for human review. In a user study with experienced Wikipedia editors, 87.5% reported higher confidence when using CLAIRE, and participants identified 64.7% more inconsistencies in the same amount of time. Combining CLAIRE with human annotation, we contribute WIKICOLLIDE, the first benchmark of real Wikipedia inconsistencies. Using random sampling with CLAIRE-assisted analysis, we find that at least 3.3% of English Wikipedia facts contradict another fact, with inconsistencies propagating into 7.3% of FEVEROUS and 4.0% of AmbigQA examples. Benchmarking strong baselines on this dataset reveals substantial headroom: the best fully automated system achieves an AUROC of only 75.1%. Our results show that contradictions are a measurable component of Wikipedia and that LLM-based systems like CLAIRE can provide a practical tool to help editors improve knowledge consistency at scale.

Modern Vision-Language Models (VLMs) demonstrate sophisticated reasoning, escalating privacy risks beyond simple attribute perception to individual-level linkage. Current privacy benchmarks are structurally insufficient for this new threat, as they primarily evaluate privacy perception while failing to address the more critical risk of privacy reasoning: a VLM's ability to infer and link distributed information to construct individual profiles. To address this critical gap, we propose MultiPriv, the first benchmark designed to systematically evaluate individual-level privacy reasoning in VLMs. We introduce the Privacy Perception and Reasoning (PPR) framework and construct a novel, bilingual multimodal dataset to support it. The dataset uniquely features a core component of synthetic individual profiles where identifiers (e.g., faces, names) are meticulously linked to sensitive attributes. This design enables nine challenging tasks evaluating the full PPR spectrum, from attribute detection to cross-image re-identification and chained inference. We conduct a large-scale evaluation of over 50 foundational and commercial VLMs. Our analysis reveals: (1) Many VLMs possess significant, unmeasured reasoning-based privacy risks. (2) Perception-level metrics are poor predictors of these reasoning risks, revealing a critical evaluation gap. (3) Existing safety alignments are inconsistent and ineffective against such reasoning-based attacks. MultiPriv exposes systemic vulnerabilities and provides the necessary framework for developing robust, privacy-preserving VLMs.

Emotion Recognition in Conversation (ERC) aims to predict utterance-level emotions in dialogues and has largely advanced through context-centric modeling. However, global context is a heterogeneous signal, and not all contextual information is equally relevant to emotion prediction. This paper focuses on the affect-oriented component of this signal, termed dialogue-level affective atmosphere, which captures a latent tendency commonly reflected in conversational emotion patterns. To estimate and exploit this tendency, we propose AtmosERC, a graph-based ERC framework that models each dialogue as a conversational graph over utterances and speakers. A relation-aware graph extractor filters and fuses heterogeneous graph signals to produce dialogue-level and speaker-conditioned affective priors. The resulting compact prior guides lightweight sequential emotion prediction and can also be verbalized into prompt-level cues for LLM-based ERC without modifying backbone models. Experiments on four ERC benchmarks show that AtmosERC improves lightweight ERC, enhances LLM-based ERC as a plug-in cue, and yields more stable predictions under local emotional deviations.

Small language models trained on a single local machine leave little room for architectural trial and error. Kairos combines bidirectional gated-DeltaNet linear attention and sliding-window attention over shared projections (LiZAttention2), block-wise Attention-Residual aggregation, a sparse Mixture-of-Experts (MoE) feed-forward layer and a multi-scale byte-level codec, trained with a uniform-noise denoising objective over one byte space shared by text, image, audio, video, lidar and control streams; this report asks whether the combination optimizes at all before asking whether it is useful. We give code-derived algorithms for each component, including a cross-session recurrent-state memory gate, then run convergence sanity checks: overfittinga single 440-byte sentence at 1--15M parameters, text only, with three seeds for codec and attention choices and single-run sweeps for seven further factors. The two attention variants tested at 3\,000 steps (LiZAttention2 and window attention alone) reach a minimum loss near 10^{-3}. After 600 steps, the mean minimum loss ranges from 0.018 (patch codec) to 0.354 (depthwise convolutional codec) with an identical ranking on three seeds. An apparent advantage of shared over separate attention projections closes with more steps or more diverse data and reverses when the projections are frozen: it is a convergence-speed effect, not a capacity effect. These checks suggest that the implementation optimizes; they say nothing about generalization, multimodal training or comparison with existing models, which a planned pretraining run is meant to address. The Discussion sizes a 200M-total/25M-active target analytically; none of its throughput figures is measured. Code is available at https://github.com/fabienfrfr/Kairos . Python package at https://pypi.org/project/kairos-fm/ .

In text-to-SQL tasks -- as in much of NLP -- compositional generalization is a major challenge: neural networks struggle with compositional generalization where training and test distributions differ. However, most recent attempts to improve this are based on word-level synthetic data or specific dataset splits to generate compositional biases. In this work, we propose a clause-level compositional example generation method. We first split the sentences in the Spider text-to-SQL dataset into sub-sentences, annotating each sub-sentence with its corresponding SQL clause, resulting in a new dataset Spider-SS. We then construct a further dataset, Spider-CG, by composing Spider-SS sub-sentences in different combinations, to test the ability of models to generalize compositionally. Experiments show that existing models suffer significant performance degradation when evaluated on Spider-CG, even though every sub-sentence is seen during training. To deal with this problem, we modify a number of state-of-the-art models to train on the segmented data of Spider-SS, and we show that this method improves the generalization performance.

ReAct-style agents for search-intensive, multi-step reasoning tasks rely largely on their own internal judgment to decide what evidence to seek, which reasoning or action step to take next, and when to stop, often producing shallow, redundant, or poorly targeted trajectories. Prior work has explored rubrics as external quality signals, but existing uses are mostly evaluative rather than action-guiding: rubrics typically serve as training-time rewards or post-hoc evaluators of completed outputs, and in deep-research settings they are often coarse-grained and report-level rather than step-level. We introduce Co-ReAct, a rubric-guided action-selection framework that uses rubrics as step-level guidance during inference. At each decision step, Co-ReAct injects a rubric into the agent's context to guide the next Reason-or-Act decision, specifying what the agent should target in evidence seeking, search, reasoning, or self-evaluation. To make this guidance reliable, we train a dedicated rubric generator with GRPO. Unlike prior pairwise or binary preference formulations, our objective optimizes a list-wise Spearman rank-correlation reward against multi-judge expert consensus rankings, encouraging rubrics that are discriminative rather than merely plausible. On DeepResearchBench and SQA-CS-V2, Co-ReAct consistently improves over ReAct and representative test-time compute baselines across search agents built on both 8B/14B open-source and frontier closed-source base models. The trained rubric generator can also serve as a drop-in component that improves these baselines without changing their underlying decision mechanisms. Our code is publicly available at https://github.com/ZBWpro/Co-ReAct.

Generating clinically useful pathology reports for pathology cases from whole-slide images (WSIs) is challenging due to gigapixel resolution, long visual-token sequences, and the complexity of case-level reasoning, where a single case may contain multiple WSIs with heterogeneous tissues and ambiguous findings. We present a simple token-efficient vision--language model for case-level synoptic report generation that remains practical under constrained GPU memory. Our architecture follows a minimal three-component design: a frozen pathology patch encoder, a lightweight two-layer MLP vision-language aligner, and a large language model decoder, with an explicit WSI marker token to separate slides within a case. Training proceeds in two supervised stages: (1) aligner-only WSI captioning using heterogeneous WSI-text pairs, and (2) case-level supervised fine-tuning on case-report pairs for structured report generation. To reduce sequence length, we represent each slide using 512 times 512 patches at 5times magnification, which reduces the average sequence length by up to 64times times compared to the commonly used 20times patches. Combined with efficient training techniques, we enable practical training with only half a NVIDIA H100 GPU. Across both training stages, our approach achieves high ROUGE-L/METEOR/BLEU-4 scores while being substantially more efficient in memory and runtime. In AI-based evaluations, our model is consistently preferred over strong baselines. Extensive ablations characterize performance-efficiency trade-offs and identify simple choices that improve robustness in multi-WSI settings. Overall, this work provides a strong, reproducible baseline for efficient pathology report generation, lowering the barrier to multi-WSI VLM research under limited compute.

We present RLM-Cascade, a proxy-layer system that applies speculative decoding at the response level to reduce LLM API costs without requiring model architecture access or a shared vocabulary. A fast, inexpensive draft model generates a candidate response; a capable verify model accepts, enhances, or is bypassed entirely depending on a lightweight complexity router. On a real-world agentic coding workload (Claude Code), RLM-Cascade achieves a draft-use rate of 88.8% across 125 production requests, reducing API cost by 45.8% relative to a direct Opus baseline. Counter-intuitively, the proxy also reduces end-to-end latency: median response time is 2,026 ms versus 3,698 ms for Native Opus -- a 1.83X speedup at p50 -- because the SKIPPED path (DeepSeek only, no Opus call) dominates the workload distribution. Quality matches or exceeds the Opus baseline: 100% pass rate on a 20-task Code/Math/Instruct benchmark versus 95% for Native Opus. We further describe a rule-based complexity router that selects the SKIPPED path for simple agentic turns and a hybrid tool-call strategy that bypasses the speculative pipeline for schema-critical tool-selection turns. RLM-Cascade is deployed in production as an enterprise AI infrastructure component and published as open source with a live metrics dashboard and Prometheus endpoint.

Lookup-based memory has been a promising way to scale the parameters of large language models (LLMs). It retrieves learned representations of local token patterns, such as n-grams, instead of reconstructing them through successive layers of computation. However, existing designs such as Engram treat each retrieved embedding as a monolithic unit. Each embedding is stored in its own hashed slot and modulated by a single scalar gate. As a result, polysemous patterns cannot selectively read out the components of their memory that are relevant to the context. Moreover, parameters are shared only through hash collisions, which are largely unrelated to semantics. We propose FactorEngram, a factorized n-gram memory with basis-level contextual gating. FactorEngram retrieves sparsity-regularized coefficients over a dictionary of basis vectors shared across patterns, so related patterns can reuse common components. The same dictionary is also used for gating. The backbone hidden state is scored against each basis vector to gate the corresponding coefficient before reconstruction, which lets the context modulate each memory component individually. FactorEngram also covers both individual tokens and multi-token n-grams, and we systematically study where the memory branch should be inserted. On 340M- and 1B-parameter Transformer backbones, FactorEngram improves language modeling and downstream task performance. Ablation studies confirm the contribution of each component and identify insertion before the attention sublayer in the middle layers as an effective configuration.

A selector that allocates work across opaque components must evaluate them without being told how they performed. We study the least communication that suffices. Each parent maintains an allocation vector over its children and updates it from outcomes by proportional redistribution. Each child reads the sign of its own allocation change, one bit per round it is selected, so no evaluation message crosses the parent-child boundary. (1) The update preserves the simplex with strict positivity. (2) Conditional on being selected, a child's sign is exactly the root outcome at every depth, a sufficient statistic. The conditioning is necessary. (3) Under interiority a single selector has a unique interior equilibrium, exact and closed-form for N=2, with almost sure convergence under decreasing steps. For general N an equi-ratio condition gives an explicit affine equilibrium. (4) The linearised mean flow has real, strictly negative tangent eigenvalues with explicit bounds for all N >= 2. (5) The mean flow converges globally. An explicit potential, up to normalisation the KL divergence between the failure and slack distributions, decreases at a rate equal to the variance of the equi-ratio statistic. Without interiority the rule drops exactly the children below the surviving support's threshold. (6) The update law composes along a single active path, since ancestors select a node's active rounds but do not alter a realised signal. No joint convergence theorem for a hierarchy whose levels adapt simultaneously is claimed. (7) The one-bit interface admits exactly four deterministic memoryless distortions, and at a single selector passing the bit on unchanged delivers strictly higher mean quality upward than negation or constant transmission. Illustrations on synthetic hierarchies up to 16,384 leaves and three real datasets (3.4 billion comparisons, no mismatches) are consistent with the theory.

The eight-component relativistic wave equation for spin-1{2} particles of Robson and Staudte (FV1{2}), a Feshbach--Villars linearization of the Feynman--Gell-Mann equation, reproduces the Dirac hydrogenic spectrum with a doubled solution space and an indefinite inner product. Its exact Stark shifts must equal the Dirac ones; whether its indefinite-metric perturbation theory delivers them is not guaranteed. We compute the first- and second-order Stark shifts of the n=1--3 levels of hydrogenic ions from H to U^{91+} in the Schrödinger, Dirac and FV1{2} theories, evaluating all spectral sums, continuum included, by the Dalgarno--Lewis method. The FV1{2} and Dirac shifts coincide level by level, to working precision at first order (closed-form roots) and to 45 significant figures at second order. Both ingredients are needed: without the explicit spin--field coupling the first-order roots become complex, and without the negative-norm states the (Zα)^2 coefficient is wrong. Norm sign and parity are locked in the doubled space: a potential lifting the 2s_{1/2}--2p_{1/2} degeneracy needs its own spin--gradient term, and shifts placed by hand on the κ-labeled states give a spurious imaginary linear Stark shift. The relativistic linear Stark effect is smaller by finite factors, but a second-moment sum rule shows the non-relativistic linear Stark strength is conserved, the missing part reappearing in singular (Zα)^{-2} second-order terms. For levels with a fine-structure partner, an exact intra-shell/regular split of the second-order shift gives the (Zα)^0 coefficients analytically and relates the π^2 terms of the (Zα)^2 coefficients to the singular ones. The Dirac weak/strong-field crossover for n=2 of hydrogen lies near 2.8~kV cm^{-1}, and the perturbative window set by the fine structure grows as Z^5.

Arabic dialect identification is a complex problem for a number of inherent properties of the language itself. In this paper, we present the experiments conducted, and the models developed by our competing team, Mawdoo3 AI, along the way to achieving our winning solution to subtask 1 of the Nuanced Arabic Dialect Identification (NADI) shared task. The dialect identification subtask provides 21,000 country-level labeled tweets covering all 21 Arab countries. An unlabeled corpus of 10M tweets from the same domain is also presented by the competition organizers for optional use. Our winning solution itself came in the form of an ensemble of different training iterations of our pre-trained BERT model, which achieved a micro-averaged F1-score of 26.78% on the subtask at hand. We publicly release the pre-trained language model component of our winning solution under the name of Multi-dialect-Arabic-BERT model, for any interested researcher out there.

Recent work in mechanistic interpretability has shown that behaviors in language models can be successfully reverse-engineered through circuit analysis. A common criticism, however, is that each circuit is task-specific, and thus such analysis cannot contribute to understanding the models at a higher level. In this work, we present evidence that insights (both low-level findings about specific heads and higher-level findings about general algorithms) can indeed generalize across tasks. Specifically, we study the circuit discovered in Wang et al. (2022) for the Indirect Object Identification (IOI) task and 1.) show that it reproduces on a larger GPT2 model, and 2.) that it is mostly reused to solve a seemingly different task: Colored Objects (Ippolito & Callison-Burch, 2023). We provide evidence that the process underlying both tasks is functionally very similar, and contains about a 78% overlap in in-circuit attention heads. We further present a proof-of-concept intervention experiment, in which we adjust four attention heads in middle layers in order to 'repair' the Colored Objects circuit and make it behave like the IOI circuit. In doing so, we boost accuracy from 49.6% to 93.7% on the Colored Objects task and explain most sources of error. The intervention affects downstream attention heads in specific ways predicted by their interactions in the IOI circuit, indicating that this subcircuit behavior is invariant to the different task inputs. Overall, our results provide evidence that it may yet be possible to explain large language models' behavior in terms of a relatively small number of interpretable task-general algorithmic building blocks and computational components.

Early rumor detection (ERD) on social media platform is very challenging when limited, incomplete and noisy information is available. Most of the existing methods have largely worked on event-level detection that requires the collection of posts relevant to a specific event and relied only on user-generated content. They are not appropriate to detect rumor sources in the very early stages, before an event unfolds and becomes widespread. In this paper, we address the task of ERD at the message level. We present a novel hybrid neural network architecture, which combines a task-specific character-based bidirectional language model and stacked Long Short-Term Memory (LSTM) networks to represent textual contents and social-temporal contexts of input source tweets, for modelling propagation patterns of rumors in the early stages of their development. We apply multi-layered attention models to jointly learn attentive context embeddings over multiple context inputs. Our experiments employ a stringent leave-one-out cross-validation (LOO-CV) evaluation setup on seven publicly available real-life rumor event data sets. Our models achieve state-of-the-art(SoA) performance for detecting unseen rumors on large augmented data which covers more than 12 events and 2,967 rumors. An ablation study is conducted to understand the relative contribution of each component of our proposed model.

Tokenization is associated with many poorly understood shortcomings in language models (LMs), yet remains an important component for long sequence scaling purposes. This work studies how tokenization impacts model performance by analyzing and comparing the stochastic behavior of tokenized models with their byte-level, or token-free, counterparts. We discover that, even when the two models are statistically equivalent, their predictive distributions over the next byte can be substantially different, a phenomenon we term as "tokenization bias''. To fully characterize this phenomenon, we introduce the Byte-Token Representation Lemma, a framework that establishes a mapping between the learned token distribution and its equivalent byte-level distribution. From this result, we develop a next-byte sampling algorithm that eliminates tokenization bias without requiring further training or optimization. In other words, this enables zero-shot conversion of tokenized LMs into statistically equivalent token-free ones. We demonstrate its broad applicability with two use cases: fill-in-the-middle (FIM) tasks and model ensembles. In FIM tasks where input prompts may terminate mid-token, leading to out-of-distribution tokenization, our method mitigates performance degradation and achieves an approximately 18% improvement in FIM coding benchmarks, consistently outperforming the standard token healing fix. For model ensembles where each model employs a distinct vocabulary, our approach enables seamless integration, resulting in improved performance (up to 3.7%) over individual models across various standard baselines in reasoning, knowledge, and coding.

AI is increasingly playing a pivotal role in transforming how scientific discoveries are made. We introduce The AI Scientist-v2, an end-to-end agentic system capable of producing the first entirely AI generated peer-review-accepted workshop paper. This system iteratively formulates scientific hypotheses, designs and executes experiments, analyzes and visualizes data, and autonomously authors scientific manuscripts. Compared to its predecessor (v1, Lu et al., 2024 arXiv:2408.06292), The AI Scientist-v2 eliminates the reliance on human-authored code templates, generalizes effectively across diverse machine learning domains, and leverages a novel progressive agentic tree-search methodology managed by a dedicated experiment manager agent. Additionally, we enhance the AI reviewer component by integrating a Vision-Language Model (VLM) feedback loop for iterative refinement of content and aesthetics of the figures. We evaluated The AI Scientist-v2 by submitting three fully autonomous manuscripts to a peer-reviewed ICLR workshop. Notably, one manuscript achieved high enough scores to exceed the average human acceptance threshold, marking the first instance of a fully AI-generated paper successfully navigating a peer review. This accomplishment highlights the growing capability of AI in conducting all aspects of scientific research. We anticipate that further advancements in autonomous scientific discovery technologies will profoundly impact human knowledge generation, enabling unprecedented scalability in research productivity and significantly accelerating scientific breakthroughs, greatly benefiting society at large. We have open-sourced the code at https://github.com/SakanaAI/AI-Scientist-v2 to foster the future development of this transformative technology. We also discuss the role of AI in science, including AI safety.

Front-end development accumulates change after change at the repository level, weaving complex cross-file dependencies that current LLM coding agents tuned for single-shot tasks cannot reliably track across multiple iterations, leading to functional regressions and code that resists maintenance. We argue the missing piece is design knowledge: architectural principles, module responsibilities, and structural constraints that developers lean on to keep code readable, maintainable, and evolvable as a system scales. To operationalize this, we propose WebDesignIter, a framework built around a persistent knowledge graph (WebAppArchKG) that fuses repository structure with design knowledge and keeps both in sync across development cycles. WebDesignIter works in two stages: design-informed planning pulls historical context and architectural overviews from WebAppArchKG to produce an implementation plan with corresponding test scripts, and design-aware generation executes that plan through targeted diff-based patches, validated by sandbox execution and automatic syntax repair. On Web-Bench, WebDesignIter delivers an average Pass@2 gain of 9.55 percentage points across nine foundation models over existing baselines. More importantly, WebDesignIter outperforms every general-purpose coding agent Claude Code, OpenHands, SWE-Agent, Codex CLI on every model configuration, posting the highest Pass@1 and Pass@2 while consuming 2530 fewer input tokens. Ablation singles out design knowledge as the most impactful component: stripping it drops Pass@1 by 11.40 percentage points, a degradation far larger than removing code-graph retrieval, patch-based generation, or sandbox verification, confirming that design knowledge provides a fundamentally more efficient and reliable path to repository-level code generation.

Multi-turn agents solve complex tasks through extended sequences of tool interactions before producing a final answer, making credit assignment a fundamental challenge during post-training. Outcome rewards provide reliable supervision for short-horizon reasoning, but become sparse and high-variance as trajectories grow to tens or hundreds of tool calls. They can also be misleading: a failed rollout may contain many useful actions that move the agent closer to the goal, yet outcome-only training assigns them the same negative advantage as the eventual mistake. We propose TRACE (Turn-level Reward Assignment via Credit Estimation), a dense credit-assignment method for agentic reinforcement learning. TRACE represents rollouts as state transitions at tool-call boundaries, obtains gold-answer log-probabilities from a frozen reference model, transforms them into log-ratio state values, and derives per-action rewards as Temporal-Difference changes in those values. This requires no additional critic or process-label training, and its one-step log-ratio TD component telescopes across redundant tool calls. On long-horizon complex search, TRACE substantially improves base-model tool-use ability using pure RL, without a cold-start supervised fine-tuning stage, an agentic mid-training stage, or training on live-web data. On the closed-web BrowseComp-Plus benchmark, it raises Qwen3-4B from 7.2 to 35.6 and Qwen3-30B-A3B from 8.4 to 42.6. The learned search behavior also transfers to open-web benchmarks, and the learning curves show earlier improvement and faster convergence during RL training.

Embodied Instruction Following (EIF) is a crucial task in embodied learning, requiring agents to interact with their environment through egocentric observations to fulfill natural language instructions. Recent advancements have seen a surge in employing large language models (LLMs) within a framework-centric approach to enhance performance in embodied learning tasks, including EIF. Despite these efforts, there exists a lack of a unified understanding regarding the impact of various components-ranging from visual perception to action execution-on task performance. To address this gap, we introduce OPEx, a comprehensive framework that delineates the core components essential for solving embodied learning tasks: Observer, Planner, and Executor. Through extensive evaluations, we provide a deep analysis of how each component influences EIF task performance. Furthermore, we innovate within this space by deploying a multi-agent dialogue strategy on a TextWorld counterpart, further enhancing task performance. Our findings reveal that LLM-centric design markedly improves EIF outcomes, identify visual perception and low-level action execution as critical bottlenecks, and demonstrate that augmenting LLMs with a multi-agent framework further elevates performance.

Reasoning ability, a core component of human intelligence, continues to pose a significant challenge for Large Language Models (LLMs) in the pursuit of AGI. Although model performance has improved under the training scaling law, significant challenges remain, particularly with respect to training algorithms, such as catastrophic forgetting, and the limited availability of novel training data. As an alternative, test-time scaling enhances reasoning performance by increasing test-time computation without parameter updating. Unlike prior methods in this paradigm focused on token space, we propose leveraging latent space for more effective reasoning and better adherence to the test-time scaling law. We introduce LatentSeek, a novel framework that enhances LLM reasoning through Test-Time Instance-level Adaptation (TTIA) within the model's latent space. Specifically, LatentSeek leverages policy gradient to iteratively update latent representations, guided by self-generated reward signals. LatentSeek is evaluated on a range of reasoning benchmarks, including GSM8K, MATH-500, and AIME2024, across multiple LLM architectures. Results show that LatentSeek consistently outperforms strong baselines, such as Chain-of-Thought prompting and fine-tuning-based methods. Furthermore, our analysis demonstrates that LatentSeek is highly efficient, typically converging within a few iterations for problems of average complexity, while also benefiting from additional iterations, thereby highlighting the potential of test-time scaling in the latent space. These findings position LatentSeek as a lightweight, scalable, and effective solution for enhancing the reasoning capabilities of LLMs.

Automatic Speech Recognition (ASR) has become an integral component of modern technology, powering applications such as voice-activated assistants, transcription services, and accessibility tools. Yet ASR systems continue to struggle with the inherent variability of human speech, such as accents, dialects, and speaking styles, as well as environmental interference, including background noise. Moreover, domain-specific conversations often employ specialized terminology, which can exacerbate transcription errors. These shortcomings not only degrade raw ASR accuracy but also propagate mistakes through subsequent natural language processing pipelines. Because redesigning an ASR model is costly and time-consuming, non-intrusive refinement techniques that leave the model's architecture unchanged have become increasingly popular. In this survey, we systematically review current non-intrusive refinement approaches and group them into five classes: fusion, re-scoring, correction, distillation, and training adjustment. For each class, we outline the main methods, advantages, drawbacks, and ideal application scenarios. Beyond method classification, this work surveys adaptation techniques aimed at refining ASR in domain-specific contexts, reviews commonly used evaluation datasets along with their construction processes, and proposes a standardized set of metrics to facilitate fair comparisons. Finally, we identify open research gaps and suggest promising directions for future work. By providing this structured overview, we aim to equip researchers and practitioners with a clear foundation for developing more robust, accurate ASR refinement pipelines.

Although graph-based learning has attracted a lot of attention, graph representation learning is still a challenging task whose resolution may impact key application fields such as chemistry or biology. To this end, we introduce GRALE, a novel graph autoencoder that encodes and decodes graphs of varying sizes into a shared embedding space. GRALE is trained using an Optimal Transport-inspired loss that compares the original and reconstructed graphs and leverages a differentiable node matching module, which is trained jointly with the encoder and decoder. The proposed attention-based architecture relies on Evoformer, the core component of AlphaFold, which we extend to support both graph encoding and decoding. We show, in numerical experiments on simulated and molecular data, that GRALE enables a highly general form of pre-training, applicable to a wide range of downstream tasks, from classification and regression to more complex tasks such as graph interpolation, editing, matching, and prediction.

This paper proposes a multi-level feature learning framework for human action recognition using a single body-worn inertial sensor. The framework consists of three phases, respectively designed to analyze signal-based (low-level), components (mid-level) and semantic (high-level) information. Low-level features capture the time and frequency domain property while mid-level representations learn the composition of the action. The Max-margin Latent Pattern Learning (MLPL) method is proposed to learn high-level semantic descriptions of latent action patterns as the output of our framework. The proposed method achieves the state-of-the-art performances, 88.7%, 98.8% and 72.6% (weighted F1 score) respectively, on Skoda, WISDM and OPP datasets.

Recent advances in text-to-image (T2I) diffusion models have seen rapid and widespread adoption. However, their powerful generative capabilities raise concerns about potential misuse for synthesizing harmful, private, or copyrighted content. To mitigate such risks, concept erasure techniques have emerged as a promising solution. Prior works have primarily focused on fine-tuning the denoising component (e.g., the U-Net backbone). However, recent causal tracing studies suggest that visual attribute information is localized in the early self-attention layers of the text encoder, indicating a potential alternative for concept erasing. Building on this insight, we conduct preliminary experiments and find that directly fine-tuning early layers can suppress target concepts but often degrades the generation quality of non-target concepts. To overcome this limitation, we propose High-Level Representation Misdirection (HiRM), which misdirects high-level semantic representations of target concepts in the text encoder toward designated vectors such as random directions or semantically defined directions (e.g., supercategories), while updating only early layers that contain causal states of visual attributes. Our decoupling strategy enables precise concept removal with minimal impact on unrelated concepts, as demonstrated by strong results on UnlearnCanvas and NSFW benchmarks across diverse targets (e.g., objects, styles, nudity). HiRM also preserves generative utility at low training cost, transfers to state-of-the-art architectures such as Flux without additional training, and shows synergistic effects with denoiser-based concept erasing methods.

Principal component analysis (PCA) is a mainstay of modern data analysis - a black box that is widely used but (sometimes) poorly understood. The goal of this paper is to dispel the magic behind this black box. This manuscript focuses on building a solid intuition for how and why principal component analysis works. This manuscript crystallizes this knowledge by deriving from simple intuitions, the mathematics behind PCA. This tutorial does not shy away from explaining the ideas informally, nor does it shy away from the mathematics. The hope is that by addressing both aspects, readers of all levels will be able to gain a better understanding of PCA as well as the when, the how and the why of applying this technique.

Graph-level anomaly detection has gained significant attention as it finds applications in various domains, such as cancer diagnosis and enzyme prediction. However, existing methods fail to capture the spectral properties of graph anomalies, resulting in unexplainable framework design and unsatisfying performance. In this paper, we re-investigate the spectral differences between anomalous and normal graphs. Our main observation shows a significant disparity in the accumulated spectral energy between these two classes. Moreover, we prove that the accumulated spectral energy of the graph signal can be represented by its Rayleigh Quotient, indicating that the Rayleigh Quotient is a driving factor behind the anomalous properties of graphs. Motivated by this, we propose Rayleigh Quotient Graph Neural Network (RQGNN), the first spectral GNN that explores the inherent spectral features of anomalous graphs for graph-level anomaly detection. Specifically, we introduce a novel framework with two components: the Rayleigh Quotient learning component (RQL) and Chebyshev Wavelet GNN with RQ-pooling (CWGNN-RQ). RQL explicitly captures the Rayleigh Quotient of graphs and CWGNN-RQ implicitly explores the spectral space of graphs. Extensive experiments on 10 real-world datasets show that RQGNN outperforms the best rival by 6.74% in Macro-F1 score and 1.44% in AUC, demonstrating the effectiveness of our framework. Our code is available at https://github.com/xydong127/RQGNN.

Recent advancements in code-fluent Large Language Models (LLMs) enabled the research on repository-level code editing. In such tasks, the model navigates and modifies the entire codebase of a project according to request. Hence, such tasks require efficient context retrieval, i.e., navigating vast codebases to gather relevant context. Despite the recognized importance of context retrieval, existing studies tend to approach repository-level coding tasks in an end-to-end manner, rendering the impact of individual components within these complicated systems unclear. In this work, we decouple the task of context retrieval from the other components of the repository-level code editing pipelines. We lay the groundwork to define the strengths and weaknesses of this component and the role that reasoning plays in it by conducting experiments that focus solely on context retrieval. We conclude that while the reasoning helps to improve the precision of the gathered context, it still lacks the ability to identify its sufficiency. We also outline the ultimate role of the specialized tools in the process of context gathering. The code supplementing this paper is available at https://github.com/JetBrains-Research/ai-agents-code-editing.

Most existing work on event extraction has focused on sentence-level texts and presumes the identification of a trigger-span -- a word or phrase in the input that evokes the occurrence of an event of interest. Event arguments are then extracted with respect to the trigger. Indeed, triggers are treated as integral to, and trigger detection as an essential component of, event extraction. In this paper, we provide the first investigation of the role of triggers for the more difficult and much less studied task of document-level event extraction. We analyze their usefulness in multiple end-to-end and pipelined transformer-based event extraction models for three document-level event extraction datasets, measuring performance using triggers of varying quality (human-annotated, LLM-generated, keyword-based, and random). We find that whether or not systems benefit from explicitly extracting triggers depends both on dataset characteristics (i.e. the typical number of events per document) and task-specific information available during extraction (i.e. natural language event schemas). Perhaps surprisingly, we also observe that the mere existence of triggers in the input, even random ones, is important for prompt-based in-context learning approaches to the task.

Group-based policy optimization methods like GRPO and GSPO have become standard for training multimodal models, leveraging group-wise rollouts and relative advantage estimation. However, they suffer from a critical gradient vanishing problem when all responses within a group receive identical rewards, causing advantage estimates to collapse and training signals to diminish. Existing attempts to mitigate this issue fall into two paradigms: filtering-based and sampling-based methods. Filtering-based methods first generate rollouts broadly and then retroactively filter out uninformative groups, leading to substantial computational overhead. Sampling-based methods proactively select effective samples before rollout but rely on static criteria or prior dataset knowledge, lacking real-time adaptability. To address these issues, we propose VADE, a Variance-Aware Dynamic sampling framework via online sample-level difficulty Estimation. Our framework integrates three key components: online sample-level difficulty estimation using Beta distributions, a Thompson sampler that maximizes information gain through the estimated correctness probability, and a two-scale prior decay mechanism that maintains robust estimation under policy evolution. This three components design enables VADE to dynamically select the most informative samples, thereby amplifying training signals while eliminating extra rollout costs. Extensive experiments on multimodal reasoning benchmarks show that VADE consistently outperforms strong baselines in both performance and sample efficiency, while achieving a dramatic reduction in computational overhead. More importantly, our framework can serves as a plug-and-play component to be seamlessly integrated into existing group-based RL algorithms. Code and models are available at https://VADE-RL.github.io.

Internal defect detection constitutes a critical process in ensuring component quality, for which anomaly detection serves as an effective solution. However, existing anomaly detection datasets predominantly focus on surface defects in visible-light images, lacking publicly available X-ray datasets targeting internal defects in components. To address this gap, we construct the first publicly accessible component X-ray anomaly detection (CXR-AD) dataset, comprising real-world X-ray images. The dataset covers five industrial component categories, including 653 normal samples and 561 defect samples with precise pixel-level mask annotations. We systematically analyze the dataset characteristics and identify three major technical challenges: (1) strong coupling between complex internal structures and defect regions, (2) inherent low contrast and high noise interference in X-ray imaging, and (3) significant variations in defect scales and morphologies. To evaluate dataset complexity, we benchmark three state-of-the-art anomaly detection frameworks (feature-based, reconstruction-based, and zero-shot learning methods). Experimental results demonstrate a 29.78% average performance degradation on CXR-AD compared to MVTec AD, highlighting the limitations of current algorithms in handling internal defect detection tasks. To the best of our knowledge, CXR-AD represents the first publicly available X-ray dataset for component anomaly detection, providing a real-world industrial benchmark to advance algorithm development and enhance precision in internal defect inspection technologies.

Large language model (LLM) agents increasingly rely on invoking external tools to complete real-world tasks. Tool retrieval, which selects a small task-relevant subset from a library of thousands of tools before the agent acts, has therefore become a critical component of LLM agent pipelines. However, existing retrievers either score each tool in isolation or assemble the tool set sequentially, so the joint utility of a candidate set is never evaluated as a whole. In this paper, we propose HYSET, short for HYperedge-based SEt-level Tool retrieval. Our contributions are threefold: (i) we formulate tool retrieval as query-conditioned hyperedge prediction on a tool co-invocation hypergraph, under which the tool set itself becomes the unit of scoring and most existing retrieval paradigms reduce to restricted instances; (ii) we capture size-dependent tool compatibility through cardinality-specific interactions; and (iii) we design HYSET as a pre-selection module requiring no modification to the downstream agent. Experiments on ToolBench demonstrate that HYSET consistently outperforms state-of-the-art baselines in both tool retrieval performance and end-to-end task success. Beyond the in-domain setting, HYSET further supports zero-shot/few-shot transfer, generalizing to held-out tools/categories and unseen domains with minimal supervision.

Predicting diverse human motions given a sequence of historical poses has received increasing attention. Despite rapid progress, existing work captures the multi-modal nature of human motions primarily through likelihood-based sampling, where the mode collapse has been widely observed. In this paper, we propose a simple yet effective approach that disentangles randomly sampled codes with a deterministic learnable component named anchors to promote sample precision and diversity. Anchors are further factorized into spatial anchors and temporal anchors, which provide attractively interpretable control over spatial-temporal disparity. In principle, our spatial-temporal anchor-based sampling (STARS) can be applied to different motion predictors. Here we propose an interaction-enhanced spatial-temporal graph convolutional network (IE-STGCN) that encodes prior knowledge of human motions (e.g., spatial locality), and incorporate the anchors into it. Extensive experiments demonstrate that our approach outperforms state of the art in both stochastic and deterministic prediction, suggesting it as a unified framework for modeling human motions. Our code and pretrained models are available at https://github.com/Sirui-Xu/STARS.

Recent works suggest that transformer models are capable of multi-tasking on diverse NLP tasks and adapting to new tasks efficiently. However, the potential of these multi-task models may be limited as they use the same set of parameters for all tasks. In contrast, humans tackle tasks in a more flexible way, by making proper presumptions on what skills and knowledge are relevant and executing only the necessary computations. Inspired by this, we propose to use task-level mixture-of-expert models, which has a collection of transformer layers (i.e., experts) and a router component that chooses from these experts dynamically and flexibly. We find that these models help improve the average performance gain (ARG) metric by 2.6% when adapting to unseen tasks in the few-shot setting and by 5.6% in the zero-shot generalization setting. Further, we show that the learned routing decisions partly rediscover human categorization of NLP tasks -- certain experts are strongly associated with extractive tasks, some with classification tasks, and some with tasks requiring world knowledge.

Commonly-used transformer language models depend on a tokenization schema which sets an unchangeable subword vocabulary prior to pre-training, destined to be applied to all downstream tasks regardless of domain shift, novel word formations, or other sources of vocabulary mismatch. Recent work has shown that "token-free" models can be trained directly on characters or bytes, but training these models from scratch requires substantial computational resources, and this implies discarding the many domain-specific models that were trained on tokens. In this paper, we present XRayEmb, a method for retrofitting existing token-based models with character-level information. XRayEmb is composed of a character-level "encoder" that computes vector representations of character sequences, and a generative component that decodes from the internal representation to a character sequence. We show that incorporating XRayEmb's learned vectors into sequences of pre-trained token embeddings helps performance on both autoregressive and masked pre-trained transformer architectures and on both sequence-level and sequence tagging tasks, particularly on non-standard English text.

Supervised low-level vision models rely on pixel-wise losses against paired references, yet paired training sets exhibit per-pair photometric inconsistency, say, different image pairs demand different global brightness, color, or white-balance mappings. This inconsistency enters through task-intrinsic photometric transfer (e.g., low-light enhancement) or unintended acquisition shifts (e.g., de-raining), and in either case causes an optimization pathology. Standard reconstruction losses allocate disproportionate gradient budget to conflicting per-pair photometric targets, crowding out content restoration. In this paper, we investigate this issue and prove that, under least-squares decomposition, the photometric and structural components of the prediction-target residual are orthogonal, and that the spatially dense photometric component dominates the gradient energy. Motivated by this analysis, we propose Photometric Alignment Loss (PAL). This flexible supervision objective discounts nuisance photometric discrepancy via closed-form affine color alignment while preserving restoration-relevant supervision, requiring only covariance statistics and tiny matrix inversion with negligible overhead. Across 6 tasks, 16 datasets, and 16 architectures, PAL consistently improves metrics and generalization. The implementation is in the appendix.

This position paper argues that the image processing community should broaden its focus from purely model-centric development to include agentic system design as an essential complementary paradigm. While deep learning has significantly advanced capabilities for specific image processing tasks, current approaches face critical limitations in generalization, adaptability, and real-world problem-solving flexibility. We propose that developing intelligent agentic systems, capable of dynamically selecting, combining, and optimizing existing image processing tools, represents the next evolutionary step for the field. Such systems would emulate human experts' ability to strategically orchestrate different tools to solve complex problems, overcoming the brittleness of monolithic models. The paper analyzes key limitations of model-centric paradigms, establishes design principles for agentic image processing systems, and outlines different capability levels for such agents.

While mechanistic interpretability has developed powerful tools to analyze the internal workings of Large Language Models (LLMs), their complexity has created an accessibility gap, limiting their use to specialists. We address this challenge by designing, building, and evaluating ELIA (Explainable Language Interpretability Analysis), an interactive web application that simplifies the outcomes of various language model component analyses for a broader audience. The system integrates three key techniques -- Attribution Analysis, Function Vector Analysis, and Circuit Tracing -- and introduces a novel methodology: using a vision-language model to automatically generate natural language explanations (NLEs) for the complex visualizations produced by these methods. The effectiveness of this approach was empirically validated through a mixed-methods user study, which revealed a clear preference for interactive, explorable interfaces over simpler, static visualizations. A key finding was that the AI-powered explanations helped bridge the knowledge gap for non-experts; a statistical analysis showed no significant correlation between a user's prior LLM experience and their comprehension scores, suggesting that the system reduced barriers to comprehension across experience levels. We conclude that an AI system can indeed simplify complex model analyses, but its true power is unlocked when paired with thoughtful, user-centered design that prioritizes interactivity, specificity, and narrative guidance.

Whole-body mesh recovery aims to estimate the 3D human body, face, and hands parameters from a single image. It is challenging to perform this task with a single network due to resolution issues, i.e., the face and hands are usually located in extremely small regions. Existing works usually detect hands and faces, enlarge their resolution to feed in a specific network to predict the parameter, and finally fuse the results. While this copy-paste pipeline can capture the fine-grained details of the face and hands, the connections between different parts cannot be easily recovered in late fusion, leading to implausible 3D rotation and unnatural pose. In this work, we propose a one-stage pipeline for expressive whole-body mesh recovery, named OSX, without separate networks for each part. Specifically, we design a Component Aware Transformer (CAT) composed of a global body encoder and a local face/hand decoder. The encoder predicts the body parameters and provides a high-quality feature map for the decoder, which performs a feature-level upsample-crop scheme to extract high-resolution part-specific features and adopt keypoint-guided deformable attention to estimate hand and face precisely. The whole pipeline is simple yet effective without any manual post-processing and naturally avoids implausible prediction. Comprehensive experiments demonstrate the effectiveness of OSX. Lastly, we build a large-scale Upper-Body dataset (UBody) with high-quality 2D and 3D whole-body annotations. It contains persons with partially visible bodies in diverse real-life scenarios to bridge the gap between the basic task and downstream applications.