Daily Papers

Block-diffusion language models offer a promising path toward faster-than-autoregressive generation by combining block-wise autoregressive decoding with within-block parallel denoising. However, in the few-step regime needed for practical acceleration, standard confidence-thresholded decoding is often brittle: aggressive thresholds hurt quality, while conservative thresholds require unnecessary denoising steps. Existing approaches that address this issue either require additional training or incur extra test-time compute. We present S2D2, a training-free self-speculative decoding framework for block-diffusion language models. Our key observation is that a block-diffusion model becomes autoregressive when the block size is reduced to one, allowing the same pretrained model to act as both drafter and verifier. S2D2 inserts a speculative verification step into standard block-diffusion decoding and uses lightweight routing policies to decide when verification is worth its cost. This yields a hybrid decoding trajectory in which diffusion proposes tokens in parallel, while the autoregressive mode acts as a local sequence-level critic. Across three mainstream block-diffusion families, S2D2 consistently improves the accuracy-speed tradeoff over strong confidence-thresholding baselines. On SDAR, we observe up to 4.7times speedup over autoregressive decoding, and up to 1.57times over a tuned dynamic decoding baseline while improving accuracy by up to 4.5 points. On LLaDA2.1-Mini, S2D2 remains complementary to built-in self-correction, including a conservative setting where it is 4.4times faster than the static baseline with slightly higher accuracy.

Autoregressive generation in large language models (LLMs) conventionally decodes from the final layer, assuming that deeper representations yield more reliable next-token predictions. We revisit this assumption by revealing a recurring Guess-Refine-Perturb dynamic: early layers form coarse guesses, intermediate layers refine reasoning-relevant semantics, and final layers can perturb these refined predictions toward generic or alignment-preferred tokens. We introduce Confident Decoding, a training-free decoding strategy that dynamically selects the most reliable near-final layer through entropy-guided conservative backward search. We further provide a theoretical formulation of layer selection as an optimal stopping problem, showing that under bounded projection noise and dominant late-stage alignment perturbation, our search rule filters perturbation while bounding the loss relative to the oracle refinement layer. Experiments across dense and Mixture-of-Experts LLMs demonstrate consistent gains on challenging reasoning benchmarks, including GPQA-Diamond, Omni-MATH, and HLE, with zero memory overhead and less than 2% latency increase. These results suggest dynamically bypassing final-layer perturbations can unlock stronger reasoning behavior from aligned LLMs.

To tackle the high inference latency exhibited by autoregressive language models, previous studies have proposed an early-exiting framework that allocates adaptive computation paths for each token based on the complexity of generating the subsequent token. However, we observed several shortcomings, including performance degradation caused by a state copying mechanism or numerous exit paths, and sensitivity to exit confidence thresholds. Consequently, we propose a Fast and Robust Early-Exiting (FREE) framework, which incorporates a shallow-deep module and a synchronized parallel decoding. Our framework enables faster inference by synchronizing the decoding process of the current token with previously stacked early-exited tokens. Furthermore, as parallel decoding allows us to observe predictions from both shallow and deep models, we present a novel adaptive threshold estimator that exploits a Beta mixture model to determine suitable confidence thresholds. We empirically demonstrated the superiority of our proposed framework on extensive generation tasks.

Recent advances in block diffusion language models have demonstrated competitive performance and strong scalability on reasoning tasks. However, existing BDLMs have limited exploration under the test-time scaling setting and face more severe decoding challenges in long Chain-of-Thought reasoning, particularly in balancing the decoding speed and effectiveness. In this work, we propose a unified framework for test-time scaling in BDLMs that introduces adaptivity in both decoding and block-wise generation. At the decoding level, we propose Bounded Adaptive Confidence Decoding (BACD), a difficulty-aware sampling strategy that dynamically adjusts denoising based on model confidence, accelerating inference while controlling error accumulation. Beyond step-wise adaptivity, we introduce Think Coarse, Critic Fine (TCCF), a test-time scaling paradigm that allocates large block sizes to exploratory reasoning and smaller block sizes to refinement, achieving an effective efficiency-effectiveness balance. To enable efficient and effective decoding with a large block size, we adopt Progressive Block Size Extension, which mitigates performance degradation when scaling block sizes. Extensive experiments show that applying BACD and TCCF to TDAR-8B yields significant improvements over strong baselines such as TraDo-8B (2.26x speedup, +11.2 points on AIME24). These results mark an important step toward unlocking the potential of BDLMs for test-time scaling in complex reasoning tasks.

Diffusion language models decode text by iteratively denoising masked token sequences, making the choice of which positions to decode a central inference-time decision. Most training-free decoding strategies use model confidence for position selection, assuming that high-confidence positions are ready to be decoded. In this work, we revisit this assumption by studying when confidence misleads fully non-autoregressive (fully non-AR) decoding. EOT tokens can receive high confidence and cause incomplete generation; inserting a suffix anchor can mitigate this issue but introduces local overconfidence near the anchor, causing anchor-adjacent tokens to be decoded too early. To address these issues, we propose Suffix-Anchored Confidence Modulation, a simple training-free method that inserts a short suffix anchor to encourage response completion and modulates confidence near the anchor according to decoding progress. This preserves the response-completion benefit of suffix anchoring while reducing premature decoding of anchor-adjacent tokens. Across text-only reasoning, vision-language reasoning, and code-generation benchmarks, our method consistently improves confidence-based fully non-AR decoding, outperforms explicit EOT suppression, and preserves the parallel decoding advantage of fully non-AR generation.

Diffusion-based large language models (Diffusion LLMs) have shown promise for non-autoregressive text generation with parallel decoding capabilities. However, the practical inference speed of open-sourced Diffusion LLMs often lags behind autoregressive models due to the lack of Key-Value (KV) Cache and quality degradation when decoding multiple tokens simultaneously. To bridge this gap, we introduce a novel block-wise approximate KV Cache mechanism tailored for bidirectional diffusion models, enabling cache reuse with negligible performance drop. Additionally, we identify the root cause of generation quality degradation in parallel decoding as the disruption of token dependencies under the conditional independence assumption. To address this, we propose a confidence-aware parallel decoding strategy that selectively decodes tokens exceeding a confidence threshold, mitigating dependency violations and maintaining generation quality. Experimental results on LLaDA and Dream models across multiple LLM benchmarks demonstrate up to 27.6times throughput improvement with minimal accuracy loss, closing the performance gap with autoregressive models and paving the way for practical deployment of Diffusion LLMs.

We introduce Reward-Guided Speculative Decoding (RSD), a novel framework aimed at improving the efficiency of inference in large language models (LLMs). RSD synergistically combines a lightweight draft model with a more powerful target model, incorporating a controlled bias to prioritize high-reward outputs, in contrast to existing speculative decoding methods that enforce strict unbiasedness. RSD employs a process reward model to evaluate intermediate decoding steps and dynamically decide whether to invoke the target model, optimizing the trade-off between computational cost and output quality. We theoretically demonstrate that a threshold-based mixture strategy achieves an optimal balance between resource utilization and performance. Extensive evaluations on challenging reasoning benchmarks, including Olympiad-level tasks, show that RSD delivers significant efficiency gains against decoding with the target model only (up to 4.4x fewer FLOPs), while achieving significant better accuracy than parallel decoding method on average (up to +3.5). These results highlight RSD as a robust and cost-effective approach for deploying LLMs in resource-intensive scenarios.

Diffusion Language Models (DLMs) have recently emerged as a strong alternative to autoregressive language models (LMs). DLMs offer comparable accuracy with faster inference speed via parallel decoding. However, standard DLM decoding strategies relying on high-confidence tokens encounter an inherent information-theoretic bottleneck that restricts decoding progress and ultimately slows generation. We demonstrate both theoretically and empirically that prioritizing high-confidence tokens is inherently inefficient. High-probability tokens carry negligible information and strictly relying on them limits the effective progress made in each decoding round. We prove that the number of decoding rounds must grow linearly with the sample's total information (negative log-likelihood) and inversely with the per-round information budget, establishing a bits-to-rounds principle. We also propose Explore-Then-Exploit (ETE), a training-free decoding strategy that maximizes information throughput and decoding efficiency. ETE combines cross-block decoding with targeted exploration of high-uncertainty tokens to reshape the conditional distribution and trigger cascades of confident predictions. Experiments verify our theoretical bounds and demonstrate that ETE consistently reduces the required number of decoding rounds compared to confidence-only baselines without compromising generation quality.

Code generation using large language models (LLMs) is highly sensitive to the choice of tokens during decoding, especially at points of uncertainty that critically affect the generated program's logic. Conventional decoding methods such as greedy search and beam search apply uniform treatment to all tokens, neglecting the unique uncertainty characteristics inherent in code generation, which can result in suboptimal outputs. In this work, we conduct an empirical analysis demonstrating that a significant portion of generation errors arises from incorrect token ranking at high-uncertainty steps, where the ground truth token exists in the candidate set but fails to be ranked first. Inspired by this insight, we introduce AdaDec, an adaptive decoding framework guided by token-level uncertainty quantified via Shannon entropy. AdaDec dynamically learns uncertainty thresholds tailored to each model and employs a pause-then-rerank mechanism with lookahead when the uncertainty surpasses these thresholds. Evaluation on the HumanEval and MBPP benchmarks reveals that AdaDec achieves up to a 15.5% improvement in Pass@1 accuracy compared to greedy decoding, matches or outperforms traditional beam search, and reduces both computational overhead and latency through targeted, selective pausing. Our findings suggest that uncertainty-aware adaptive decoding holds considerable potential for enhancing both the reliability and efficiency of code generation with LLMs.

Inference-time optimization scales computation to derive deliberate reasoning steps for effective performance. While previous search-based strategies address the short-sightedness of auto-regressive generation, the vast search space leads to excessive exploration and insufficient exploitation. To strike an efficient balance to derive the optimal step, we frame the decoding strategy as foresight sampling, leveraging simulated future steps to obtain globally optimal step estimation. Built on it, we propose a novel decoding strategy, named phi-Decoding. To provide a precise and expressive estimation of step value, phi-Decoding approximates two distributions via foresight and clustering. Sampling from the joint distribution, the optimal steps can be selected for exploitation. To support adaptive computation allocation, we propose in-width and in-depth pruning strategies, featuring a light-weight solution to achieve inference efficiency. Extensive experiments across seven benchmarks show phi-Decoding outperforms strong baselines in both performance and efficiency. Additional analysis demonstrates its generalization across various LLMs and scalability across a wide range of computing budgets. The code will be released at https://github.com/xufangzhi/phi-Decoding, and the open-source PyPI package is coming soon.

Diffusion large language models promise parallel token generation, yet inference remains bottlenecked by deciding which masked tokens can be safely committed together. Fast-dLLM addressed this with KV caching and confidence-guided parallel decoding, but its decoding theory uses a homogeneous high-confidence assumption that effectively reduces each candidate set to its weakest selected token. We argue that this leaves speed on the table because real decoding steps exhibit heterogeneous confidence profiles. We propose Fast-dLLM++, a training-free extension that introduces Fréchet profile decoding: selecting parallel commit sets from the full sorted confidence profile rather than a single worst-case confidence. The resulting rule is a heterogeneous-confidence generalization of Fast-dLLM's factor selector and it recovers the previous rule exactly in the equal-confidence case and adds a provable heterogeneity bonus when the selected tokens have uneven confidences. Fast-dLLM++ leaves the model, diffusion process, and cache implementation entirely unchanged, making it a drop-in replacement for existing Fast-dLLM decoding. Experiments on GSM8K, MATH, HumanEval, and MBPP with the LLaDA-8B model show that the theoretical improvement translates directly into empirical gains: profile-aware selection improves the accuracy--throughput frontier by exploiting safe parallelism that weakest-token rules miss, achieving up to 37\% higher throughput at comparable accuracy. Our code release is at https://github.com/Ringo-Star/FastdLLM_plusplus.

Real-world machine learning deployments are characterized by mismatches between the source (training) and target (test) distributions that may cause performance drops. In this work, we investigate methods for predicting the target domain accuracy using only labeled source data and unlabeled target data. We propose Average Thresholded Confidence (ATC), a practical method that learns a threshold on the model's confidence, predicting accuracy as the fraction of unlabeled examples for which model confidence exceeds that threshold. ATC outperforms previous methods across several model architectures, types of distribution shifts (e.g., due to synthetic corruptions, dataset reproduction, or novel subpopulations), and datasets (Wilds, ImageNet, Breeds, CIFAR, and MNIST). In our experiments, ATC estimates target performance 2-4times more accurately than prior methods. We also explore the theoretical foundations of the problem, proving that, in general, identifying the accuracy is just as hard as identifying the optimal predictor and thus, the efficacy of any method rests upon (perhaps unstated) assumptions on the nature of the shift. Finally, analyzing our method on some toy distributions, we provide insights concerning when it works. Code is available at https://github.com/saurabhgarg1996/ATC_code/.

Diffusion large language models (dLLMs) theoretically permit token decoding in arbitrary order, a flexibility that could enable richer exploration of reasoning paths than autoregressive (AR) LLMs. In practice, however, random-order decoding often hurts generation quality. To mitigate this, low-confidence remasking improves single-sample quality (e.g., Pass@1) by prioritizing confident tokens, but it also suppresses exploration and limits multi-sample gains (e.g., Pass@k), creating a fundamental quality--exploration dilemma. In this paper, we provide a unified explanation of this dilemma. We show that low-confidence remasking improves a myopic proxy for quality while provably constraining the entropy of the induced sequence distribution. To overcome this limitation, we characterize the optimal distribution that explicitly balances quality and exploration, and develop a simple Independent Metropolis--Hastings sampler that approximately targets this distribution during decoding. Experiments across a range of reasoning benchmarks including MATH500, AIME24/25, HumanEval, and MBPP show that our approach yields better exploration-quality tradeoff than both random and low-confidence remasking.

Speculative decoding accelerates Large Language Models (LLMs) inference by using a lightweight draft model to propose candidate tokens that are verified in parallel by the target model. However, existing draft model training objectives are not directly aligned with the inference-time goal of maximizing consecutive token acceptance. To address this issue, we reformulate the draft model optimization objective, shifting the focus from token prediction accuracy to the overall acceptance length. In this paper, we build upon PARD to propose PARD-2, a dual-mode speculative decoding framework with Confidence-Adaptive Token (CAT) optimization. This approach adaptively reweights each token to better align with the verification process. Notably, PARD-2 enables a single draft model to support both target-dependent and target-independent modes. Experiments across diverse models and tasks demonstrate that PARD-2 achieves up to 6.94times lossless acceleration, surpassing EAGLE-3 by 1.9times and PARD by 1.3times on Llama3.1-8B. Our code is available at https://github.com/AMD-AGI/PARD.

Diffusion-based large language models (dLLMs) are gaining attention for their inherent capacity for parallel decoding, offering a compelling alternative to autoregressive LLMs. Among various decoding strategies, blockwise semi-autoregressive (semi-AR) approaches are widely adopted due to their natural support for KV caching and their favorable accuracy-speed trade-off. However, this paper identifies two fundamental limitations in the conventional semi-AR decoding approach that applies a fixed block size: i) late decoding overhead, where the unmasking of high-confidence tokens outside the current block is unnecessarily delayed, and ii) premature decoding error, where low-confidence tokens inside the current block are committed too early, leading to incorrect tokens. This paper presents the first systematic investigation challenging the fixed block size assumption in semi-AR decoding. Through a statistical analysis of confidence dynamics during the denoising process, we identify a volatility band (VB) region during dLLM decoding, which encodes local semantic structure and can be used to guide adaptive block sizing. Leveraging these insights, we introduce AdaBlock-dLLM, a training-free, plug-and-play scheduler that adaptively aligns block boundaries with semantic steps by adjusting block size during runtime. Extensive experiments across diverse benchmarks show that AdaBlock-dLLM achieves up to 5.3% accuracy improvement under the same throughput budget. Beyond inference-time optimization, we hope our semantics-aware adaptive scheduling approach and confidence-based analysis will inspire future training strategies for dLLMs.

Diffusion large language models (dLLMs) generate text through iterative denoising steps, achieving parallel decoding by denoising only high-confidence positions at each step. However, existing approaches often repetitively remask tokens due to initially low confidence scores, leading to redundant iterations and limiting overall acceleration. Through the analysis of dLLM decoding traces, we observe that the model often determines the final prediction for a token several steps before the decoding step. To leverage this historical information and avoid redundant steps, we introduce the concept of Trace Credit, which quantifies each token's convergence potential by accumulating historical logits. Furthermore, we propose CreditDecoding, a training-free parallel decoding algorithm that accelerates the confidence convergence of correct but underconfident tokens by fusing current logits with Trace Credit. This process significantly reduces redundant iterations and enhances decoding robustness. On eight benchmarks, CreditDecoding achieves a 5.48 times speedup and a 0.48 performance improvement over LLaDA-8B-Instruct, and a 4.11 times speedup with a 0.15 performance improvement over LLaDA-MoE-Instruct. Importantly, CreditDecoding scales effectively to long sequences and is orthogonal to mainstream inference optimizations, making it a readily integrable and versatile solution.

Inference-time scaling has emerged as a powerful alternative to parameter scaling for improving language model performance on complex reasoning tasks. While existing methods have shown strong performance gains under fixed compute budgets, there has been little focus on optimally utilizing that budget during inference. In this work, we introduce A*-decoding, a search-based inference-time strategy that builds on the A* search algorithm to optimally utilize a fixed compute budget by prioritizing high-quality reasoning paths during generation. We frame language model decoding as a structured search in a state space of partial solutions, applying the A* transition model to identify promising continuations guided by an external process supervision signal. In our experiments, A*-decoding reaches the performance levels of strong inference scaling baselines like best-of-N and particle filtering while using up to 3x fewer tokens and 30% fewer PRM passes under equivalent compute budgets. On the MATH500 and AIME 2024 benchmarks, A*-decoding enables Llama-3.2-1B-Instruct to match the performance of the 70x larger Llama-3.1-70B-Instruct, and allows Qwen3-1.7B to reach o1-like reasoning accuracy. These results highlight the power of structured search in decoding, offering an alternative to brute-force sampling or scale-driven gains. Our work demonstrates how thoughtful inference-time strategies can enhance reasoning in SLMs, pointing toward future advances in more efficient and scalable language model deployment.

Speculative decoding accelerates language model inference by using a fast drafter to propose candidate tokens that are then verified by a larger target model. Existing theory largely studies the stochastic, distribution-preserving setting, where the goal is to exactly sample from the target distribution. In contrast, many practical systems use greedy decoding, relaxed acceptance rules, or tree-based candidate sets, where success is governed by local ranking and threshold events rather than exact distributional equality. We develop a theory for these regimes. We identify that many common acceptance criteria have rejection regions that can be characterized as lower level sets of the target distribution. For these, we characterize the exact KL divergence required for rejection yielding exact certificates and sharp margin-based bounds for strict greedy decoding, additive and multiplicative relaxed acceptance, top-(m) relaxed criteria, and entropy-thresholded acceptance. We then extend the framework to greedy tree decoding, deriving exact and margin-only certificates for when the target greedy token remains covered by the drafter's top-(m) candidates. Finally, we evaluate the resulting certificates on Qwen3 models, showing that relaxed and tree-based criteria substantially enlarge the region of certified acceptance, especially on decoding steps with low target model distribution margin. These results complement existing distribution-preserving analyses of speculative decoding by characterizing the deterministic local acceptance events common in practical inference systems.

Decoding sits between a language model and everything we do with it, yet it is still treated as a heuristic knob-tuning exercise. We argue decoding should be understood as a principled optimisation layer: at each token, we solve a regularised problem over the probability simplex that trades off model score against structural preferences and constraints. This single template recovers greedy decoding, Softmax sampling, Top-K, Top-P, and Sparsemax-style sparsity as special cases, and explains their common structure through optimality conditions. More importantly, the framework makes it easy to invent new decoders without folklore. We demonstrate this by designing Best-of-K (BoK), a KL-anchored coverage objective aimed at multi-sample pipelines (self-consistency, reranking, verifier selection). BoK targets the probability of covering good alternatives within a fixed K-sample budget and improves empirical performance. We show that such samples can improve accuracy by, for example, +18.6% for Qwen2.5-Math-7B on MATH500 at high sampling temperatures.

The growing computational demands of large language models (LLMs) make efficient inference and activation strategies increasingly critical. While recent approaches, such as Mixture-of-Experts (MoE), leverage selective activation but require specialized training, training-free sparse activation methods offer broader applicability and superior resource efficiency through their plug-and-play design. However, many existing methods rely solely on hidden state magnitudes to determine activation, resulting in high approximation errors and suboptimal inference accuracy. To address these limitations, we propose WINA (Weight Informed Neuron Activation), a novel, simple, and training-free sparse activation framework that jointly considers hidden state magnitudes and the column-wise ell_2-norms of weight matrices. We show that this leads to a sparsification strategy that obtains optimal approximation error bounds with theoretical guarantees tighter than existing techniques. Empirically, WINA also outperforms state-of-the-art methods (e.g., TEAL) by up to 2.94% in average performance at the same sparsity levels, across a diverse set of LLM architectures and datasets. These results position WINA as a new performance frontier for training-free sparse activation in LLM inference, advancing training-free sparse activation methods and setting a robust baseline for efficient inference. The source code is available at https://github.com/microsoft/wina.

Mixture-of-Experts (MoE) architectures employ sparse activation to deliver faster training and inference with higher accuracy than dense LLMs. However, in production serving, MoE models require batch inference to optimize hardware efficiency, which may cause excessive expert activation and thus slow the memory-bound decoding stage. To address the fundamental tension between batch decoding and expert sparsity, we present SERE, a Similarity-based Expert Re-routing method for Efficient batch decoding in MoE models. SERE dynamically reduces the number of active experts in an input-aware manner by re-routing tokens from secondary experts to their most similar primary counterparts. It also leverages similarity patterns to identify and preserve critical experts, thereby preventing capability loss. Notably, SERE avoids static expert pruning or merging, instead enabling dynamic expert skipping based on batch-level expert redundancy. Additionally, we provide an efficient custom CUDA kernel for SERE, enabling plug-and-play use in vLLM with only a single-line code change. Extensive experiments on various complex reasoning benchmarks demonstrate that SERE achieves up to 2.0x speedup with minimal quality loss, providing a practical solution for cost-efficient and latency-sensitive large-scale MoE deployment. Code implementation of SERE can be found in https://github.com/JL-Cheng/SERE.

Diffusion Large Language Models (dLLMs) have demonstrated significant potential for high-speed inference. However, current confidence-driven decoding strategies are constrained by limited parallelism, typically achieving only 1--3 tokens per forward pass (TPF). In this work, we identify that the degree of parallelism during dLLM inference is highly sensitive to the Token Filling Order (TFO). Then, we introduce Lookahead PArallel Decoding LoPA, a training-free, plug-and-play algorithm, to identify a superior TFO and hence accelerate inference. LoPA concurrently explores distinct candidate TFOs via parallel branches, and selects the one with the highest potential for future parallelism based on branch confidence. We apply LoPA to the state-of-the-art D2F model and observe a substantial enhancement in decoding efficiency. Notably, LoPA increases the TPF of D2F-Dream to 10.1 on the GSM8K while maintaining performance superior to the Dream baseline. Furthermore, to facilitate this unprecedented degree of parallelism, we develop a specialized multi-device inference system featuring Branch Parallelism (BP), which achieves a single-sample throughput of 1073.9 tokens per second under multi-GPU deployment. The code is available at https://github.com/zhijie-group/LoPA.

One of the fundamental challenges in enabling fault-tolerant quantum computation is realising fast enough quantum decoders. We present a new two-stage decoder that accelerates the decoding cycle and boosts accuracy. In the first stage, a partial decoder based on belief propagation is used to correct errors that occurred with high probability. In the second stage, a conventional decoder corrects any remaining errors. We study the performance of our two-stage decoder with simulations using the surface code under circuit-level noise. When the conventional decoder is minimum-weight perfect matching, adding the partial decoder decreases bandwidth requirements, increases speed and improves logical accuracy. Specifically, we observe partial decoding consistently speeds up the minimum-weight perfect matching stage by between 2x-4x on average depending on the parameter regime, and raises the threshold from 0.94% to 1.02%.

Recent advances in Transformer-based large language models (LLMs) have led to significant performance improvements across many tasks. These gains come with a drastic increase in the models' size, potentially leading to slow and costly use at inference time. In practice, however, the series of generations made by LLMs is composed of varying levels of difficulty. While certain predictions truly benefit from the models' full capacity, other continuations are more trivial and can be solved with reduced compute. In this work, we introduce Confident Adaptive Language Modeling (CALM), a framework for dynamically allocating different amounts of compute per input and generation timestep. Early exit decoding involves several challenges that we address here, such as: (1) what confidence measure to use; (2) connecting sequence-level constraints to local per-token exit decisions; and (3) attending back to missing hidden representations due to early exits in previous tokens. Through theoretical analysis and empirical experiments on three diverse text generation tasks, we demonstrate the efficacy of our framework in reducing compute -- potential speedup of up to times 3 -- while provably maintaining high performance.

While significant advances exist in pseudo-label generation for semi-supervised semantic segmentation, pseudo-label selection remains understudied. Existing methods typically use fixed confidence thresholds to retain high-confidence predictions as pseudo-labels. However, these methods cannot cope with network overconfidence tendency, where correct and incorrect predictions overlap significantly in high-confidence regions, making separation challenging and amplifying model cognitive bias. Meanwhile, the direct discarding of low-confidence predictions disrupts spatial-semantic continuity, causing critical context loss. We propose Confidence Separable Learning (CSL) to address these limitations. CSL formulates pseudo-label selection as a convex optimization problem within the confidence distribution feature space, establishing sample-specific decision boundaries to distinguish reliable from unreliable predictions. Additionally, CSL introduces random masking of reliable pixels to guide the network in learning contextual relationships from low-reliability regions, thereby mitigating the adverse effects of discarding uncertain predictions. Extensive experimental results on the Pascal, Cityscapes, and COCO benchmarks show that CSL performs favorably against state-of-the-art methods. Code and model weights are available at https://github.com/PanLiuCSU/CSL.

Modern scene text recognition systems often depend on large end-to-end architectures that require extensive training and are prohibitively expensive for real-time scenarios. In such cases, the deployment of heavy models becomes impractical due to constraints on memory, computational resources, and latency. To address these challenges, we propose a novel, training-free plug-and-play framework that leverages the strengths of pre-trained text recognizers while minimizing redundant computations. Our approach uses context-based understanding and introduces an attention-based segmentation stage, which refines candidate text regions at the pixel level, improving downstream recognition. Instead of performing traditional text detection that follows a block-level comparison between feature map and source image and harnesses contextual information using pretrained captioners, allowing the framework to generate word predictions directly from scene context.Candidate texts are semantically and lexically evaluated to get a final score. Predictions that meet or exceed a pre-defined confidence threshold bypass the heavier process of end-to-end text STR profiling, ensuring faster inference and cutting down on unnecessary computations. Experiments on public benchmarks demonstrate that our paradigm achieves performance on par with state-of-the-art systems, yet requires substantially fewer resources.

Minimum Bayes risk (MBR) decoding outputs the hypothesis with the highest expected utility over the model distribution for some utility function. It has been shown to improve accuracy over beam search in conditional language generation problems and especially neural machine translation, in both human and automatic evaluations. However, the standard sampling-based algorithm for MBR is substantially more computationally expensive than beam search, requiring a large number of samples as well as a quadratic number of calls to the utility function, limiting its applicability. We describe an algorithm for MBR which gradually grows the number of samples used to estimate the utility while pruning hypotheses that are unlikely to have the highest utility according to confidence estimates obtained with bootstrap sampling. Our method requires fewer samples and drastically reduces the number of calls to the utility function compared to standard MBR while being statistically indistinguishable in terms of accuracy. We demonstrate the effectiveness of our approach in experiments on three language pairs, using chrF++ and COMET as utility/evaluation metrics.

To alleviate the computational burden of large language models (LLMs), architectures with activation sparsity, represented by mixture-of-experts (MoE), have attracted increasing attention. However, the non-differentiable and inflexible routing of vanilla MoE hurts model performance. Moreover, while each token activates only a few parameters, these sparsely-activated architectures exhibit low chunk-level sparsity, indicating that the union of multiple consecutive tokens activates a large ratio of parameters. Such a sparsity pattern is unfriendly for acceleration under low-resource conditions (e.g., end-side devices) and incompatible with mainstream acceleration techniques (e.g., speculative decoding). To address these challenges, we introduce a novel MoE architecture, BlockFFN, as well as its efficient training and deployment techniques. Specifically, we use a router integrating ReLU activation and RMSNorm for differentiable and flexible routing. Next, to promote both token-level sparsity (TLS) and chunk-level sparsity (CLS), CLS-aware training objectives are designed, making BlockFFN more acceleration-friendly. Finally, we implement efficient acceleration kernels, combining activation sparsity and speculative decoding for the first time. The experimental results demonstrate the superior performance of BlockFFN over other MoE baselines, achieving over 80% TLS and 70% 8-token CLS. Our kernels achieve up to 3.67times speedup on real end-side devices than dense models. All codes and checkpoints are available publicly (https://github.com/thunlp/BlockFFN).

Video temporal grounding supports applications such as video search, content review, and automated editing by localizing events described in natural language. Yet existing generative models typically output timestamps without explicit interval-level confidence scores to guide candidate selection. We separate candidate generation from acceptance by scoring individual intervals within the original decoding pass. A lightweight confidence head reads pooled decoder states, providing an explicit score trained for interval selection. Offline verifier scores supervise the head on fixed candidate sequences, and temporal-overlap labels adapt it to current rollouts during reinforcement learning. GT-anchored candidate-pool supervision and set-level optimization train the generator. The resulting scores support ranking, threshold-based selection, and rejection without invoking an external verifier at inference. On a fixed OMTG-Bench candidate pool, confidence raises query-macro Recall@0.5 from 9.95% to 14.42% over generation order at a 10% global return budget, and from 26.48% to 31.12% at a 25% budget. The continuous scores let downstream applications adjust return budgets or acceptance thresholds to match their precision-recall preferences, without regenerating candidate intervals.

In this work, we propose Dimple, the first Discrete Diffusion Multimodal Large Language Model (DMLLM). We observe that training with a purely discrete diffusion approach leads to significant training instability, suboptimal performance, and severe length bias issues. To address these challenges, we design a novel training paradigm that combines an initial autoregressive phase with a subsequent diffusion phase. This approach yields the Dimple-7B model, trained on the same dataset and using a similar training pipeline as LLaVA-NEXT. Dimple-7B ultimately surpasses LLaVA-NEXT in performance by 3.9%, demonstrating that DMLLM can achieve performance comparable to that of autoregressive models. To improve inference efficiency, we propose a decoding strategy termed confident decoding, which dynamically adjusts the number of tokens generated at each step, significantly reducing the number of generation iterations. In autoregressive models, the number of forward iterations during generation equals the response length. With confident decoding, however, the number of iterations needed by Dimple is even only text{response length}{3}. We also re-implement the prefilling technique in autoregressive models and demonstrate that it does not significantly impact performance on most benchmark evaluations, while offering a speedup of 1.5x to 7x. Additionally, we explore Dimple's capability to precisely control its response using structure priors. These priors enable structured responses in a manner distinct from instruction-based or chain-of-thought prompting, and allow fine-grained control over response format and length, which is difficult to achieve in autoregressive models. Overall, this work validates the feasibility and advantages of DMLLM and enhances its inference efficiency and controllability. Code and models are available at https://github.com/yu-rp/Dimple.

Large language models (LLMs), despite their impressive performance across a wide range of tasks, often struggle to balance two competing objectives in open-ended text generation: fostering diversity and creativity while preserving logical coherence. Existing truncated sampling techniques, including temperature scaling, top-\p (nucleus) sampling, and min-\p sampling, aim to manage this trade-off. However, they exhibit limitations, particularly in the effective incorporation of the confidence of the model into the corresponding sampling strategy. For example, min-\p sampling relies on a single top token as a heuristic for confidence, eventually underutilizing the information of the probability distribution. Toward effective incorporation of the confidence of the model, in this paper, we present **top-H** decoding. We first establish the theoretical foundation of the interplay between creativity and coherence in truncated sampling by formulating an **entropy-constrained minimum divergence** problem. We then prove this minimization problem to be equivalent to an **entropy-constrained mass maximization** (ECMM) problem, which is NP-hard. Finally, we present top-H decoding, a computationally efficient greedy algorithm to solve the ECMM problem. Extensive empirical evaluations demonstrate that top-H outperforms the state-of-the-art (SoTA) alternative of min-\p sampling by up to **25.63%** on creative writing benchmarks, while maintaining robustness on question-answering datasets such as GPQA, GSM8K, and MT-Bench. Additionally, an *LLM-as-judge* evaluation confirms that top-H indeed produces coherent outputs even at higher temperatures, where creativity is especially critical. In summary, top-H advances SoTA in open-ended text generation and can be *easily integrated* into creative writing applications. The code is available at https://github.com/ErfanBaghaei/Top-H-Decoding.

Large Vision-Language Models (LVLMs) have demonstrated remarkable multimodal capabilities, but they inherit the tendency to hallucinate from their underlying language models. While visual contrastive decoding has been proposed to mitigate this issue, existing methods often apply generic visual augmentations that disregard the specific context provided by the text query, limiting their effectiveness. This study introduces a novel training-free decoding strategy that addresses these limitations, featuring two key contributions. First, a self-augmentation prompting strategy that leverages the intrinsic knowledge of the model to dynamically align semantics between the query and the visual augmentation. Second, an adaptive thresholding algorithm that adaptively adjusts next token candidate size based on the output sparsity, utilizing full information from the logit distribution. Extensive experiments across four LVLMs and seven benchmarks demonstrate that the proposed decoding significantly enhances factual consistency compared to state-of-the-art decoding methods. This work highlights the importance of integrating query-dependent augmentation and entropy-aware decoding for improving effective generation of LVLMs.

Diffusion language models (DLMs) provide a bidirectional generation framework naturally suited for infilling, yet their performance is constrained by the pre-specified infilling length. In this paper, we reveal that DLMs possess an inherent ability to discover the correct infilling length. We identify two key statistical phenomena in the first-step denoising confidence: a local Oracle Peak that emerges near the ground-truth length and a systematic Length Bias that often obscures this signal. By leveraging this signal and calibrating the bias, our training-free method CAL (Calibrated Adaptive Length) enables DLMs to approximate the optimal length through an efficient search before formal decoding. Empirical evaluations demonstrate that CAL improves Pass@1 by up to 47.7\% over fixed-length baselines and 40.5\% over chat-based adaptive methods in code infilling, while boosting BLEU-2 and ROUGE-L by up to 8.5\% and 9.9\% in text infilling. These results demonstrate that CAL paves the way for robust DLM infilling without requiring any specialized training. Code is available at https://github.com/NiuHechang/Calibrated_Adaptive_Length.

Diffusion Large Language Models (DLLMs) enable fully parallel token decoding but often remain impractical at inference time due to the many denoising iterations required to refine an information-free, fully masked initialization into coherent text. Most existing acceleration methods focus on traversing this generative trajectory more efficiently via improved solvers or sampling strategies. We advance a complementary perspective: shorten the trajectory itself by starting closer to the target distribution through context-aware initialization. We propose a training-free interface that injects prompt-conditioned priors from a lightweight auxiliary model into the diffusion initialization, and instantiate it with two mechanisms: discrete token injection and representation-level embedding interpolation. Because injected priors can be imperfect and unmask-only decoding can over-commit early, we also introduce a simple confidence-based remasking mechanism as a form of prior skepticism. Preliminary evidence on GSM8K suggests that context-aware initialization can substantially reduce denoising iterations (about 35\% fewer function evaluations in our setting), while also exposing a key open challenge: naive warm-starting can degrade final accuracy relative to strong diffusion baselines. We use these findings to motivate a research agenda around calibration, revision mechanisms, and representation alignment for reliable warm-started diffusion decoding.

While LLaDA2.0 showcased the scaling potential of 100B-level block-diffusion models and their inherent parallelization, the delicate equilibrium between decoding speed and generation quality has remained an elusive frontier. Today, we unveil LLaDA2.1, a paradigm shift designed to transcend this trade-off. By seamlessly weaving Token-to-Token (T2T) editing into the conventional Mask-to-Token (M2T) scheme, we introduce a joint, configurable threshold-decoding scheme. This structural innovation gives rise to two distinct personas: the Speedy Mode (S Mode), which audaciously lowers the M2T threshold to bypass traditional constraints while relying on T2T to refine the output; and the Quality Mode (Q Mode), which leans into conservative thresholds to secure superior benchmark performances with manageable efficiency degrade. Furthering this evolution, underpinned by an expansive context window, we implement the first large-scale Reinforcement Learning (RL) framework specifically tailored for dLLMs, anchored by specialized techniques for stable gradient estimation. This alignment not only sharpens reasoning precision but also elevates instruction-following fidelity, bridging the chasm between diffusion dynamics and complex human intent. We culminate this work by releasing LLaDA2.1-Mini (16B) and LLaDA2.1-Flash (100B). Across 33 rigorous benchmarks, LLaDA2.1 delivers strong task performance and lightning-fast decoding speed. Despite its 100B volume, on coding tasks it attains an astounding 892 TPS on HumanEval+, 801 TPS on BigCodeBench, and 663 TPS on LiveCodeBench.

Decoding for large language models is typically treated as a collection of isolated sampling strategies, with limited theoretical understanding of the behaviours they induce and how their underlying objectives relate. We formulate decoding as an optimisation problem over next-token distributions on the probability simplex, balancing expected model score against regularisation under support constraints. This view recovers familiar decoding methods through choices of regularisers and support constraints; more importantly, it enables new decoders to be constructed by composing distributional preferences within a single optimisation problem without external rewards, learned critics, or model parameter updates. We introduce CompoSimplex, a library with configurable support rules, regularisation primitives, and simplex solvers for constructing and evaluating compositional decoders. We evaluate standard samplers, individual regularisers, and compositions across multiple models and reasoning tasks. Our results show that compositions can realise trade-offs between single-sample quality, multi-sample quality, and diversity that are not attained by individual decoding objectives.

Recent advances in masked diffusion models (MDMs) have established them as powerful non-autoregressive alternatives for sequence generation. Nevertheless, our preliminary experiments reveal that the generation quality of MDMs is still highly sensitive to the choice of decoding strategy. In particular, widely adopted uncertainty-based samplers suffer from two key limitations: a lack of global trajectory control and a pronounced bias toward trivial tokens in the early stages of decoding. These shortcomings restrict the full potential of MDMs. In this work, we introduce Position-Aware Confidence-Calibrated Sampling (PC-Sampler), a novel decoding strategy that unifies global trajectory planning with content-aware informativeness maximization. PC-Sampler incorporates a position-aware weighting mechanism to regulate the decoding path and a calibrated confidence score to suppress the premature selection of trivial tokens. Extensive experiments on three advanced MDMs across seven challenging benchmarks-including logical reasoning and planning tasks-demonstrate that PC-Sampler consistently outperforms existing MDM decoding strategies by more than 10% on average, significantly narrowing the performance gap with state-of-the-art autoregressive models. All codes are available at https://github.com/NEUIR/PC-Sampler.

Diffusion Large Language Models (dLLMs) have emerged as a promising alternative to autoregressive generation by enabling parallel token prediction. However, practical dLLM decoding still suffers from high inference latency, which limits deployment. In this work, we observe that a substantial part of this inefficiency comes from recurring redundancy in the decoding process, including spatial redundancy caused by confidence clusters and positional ambiguity, and temporal redundancy caused by repeatedly remasking predictions that have already stabilized. Motivated by these patterns, we propose R^{2}-dLLM, a unified framework for reducing decoding redundancy from both inference and training perspectives. At inference time, we introduce training-free decoding rules that aggregate local confidence and token predictions, and finalize temporally stable tokens to avoid redundant decoding steps. We further propose a redundancy-aware supervised fine-tuning pipeline that aligns the model with efficient decoding trajectories and reduces reliance on manually tuned thresholds. Experiments demonstrate that R^{2}-dLLM consistently reduces the number of decoding steps by up to 88\% compared to existing decoding strategies, while maintaining competitive generation quality across different models and tasks. These results validate that decoding redundancy is a central bottleneck in dLLMs, and that explicitly reducing it yields substantial practical efficiency gains. Our code and models are available at https://github.com/GATECH-EIC/R2-dLLM.

The proliferation of large language models (LLMs) has led to the adoption of Mixture-of-Experts (MoE) architectures that dynamically leverage specialized subnetworks for improved efficiency and performance. Despite their benefits, MoE models face significant challenges during inference, including inefficient memory management and suboptimal batching, due to misaligned design choices between the model architecture and the system policies. Furthermore, the conventional approach of training MoEs from scratch is increasingly prohibitive in terms of cost. In this paper, we propose a novel framework Read-ME that transforms pre-trained dense LLMs into smaller MoE models (in contrast to "upcycling" generalist MoEs), avoiding the high costs of ground-up training. Our approach employs activation sparsity to extract experts. To compose experts, we examine the widely-adopted layer-wise router design and show its redundancy, and thus we introduce the pre-gating router decoupled from the MoE backbone that facilitates system-friendly pre-computing and lookahead scheduling, enhancing expert-aware batching and caching. Our codesign therefore addresses critical gaps on both the algorithmic and system fronts, establishing a scalable and efficient alternative for LLM inference in resource-constrained settings. Read-ME outperforms other popular open-source dense models of similar scales, achieving improvements of up to 10.1% on MMLU, and improving mean end-to-end latency up to 6.1%. Codes are available at: https://github.com/VITA-Group/READ-ME.

We study the tradeoff between computational effort and classification accuracy in a cascade of deep neural networks. During inference, the user sets the acceptable accuracy degradation which then automatically determines confidence thresholds for the intermediate classifiers. As soon as the confidence threshold is met, inference terminates immediately without having to compute the output of the complete network. Confidence levels are derived directly from the softmax outputs of intermediate classifiers, as we do not train special decision functions. We show that using a softmax output as a confidence measure in a cascade of deep neural networks leads to a reduction of 15%-50% in the number of MAC operations while degrading the classification accuracy by roughly 1%. Our method can be easily incorporated into pre-trained non-cascaded architectures, as we exemplify on ResNet. Our main contribution is a method that dynamically adjusts the tradeoff between accuracy and computation without retraining the model.

Large Language Models suffer from hallucination, generating plausible yet factually incorrect content. Current mitigation strategies focus on post-generation correction, which is computationally expensive and fails to prevent unreliable content generation. We propose a confidence-aware routing system that proactively assesses model uncertainty before generation and redirects queries based on estimated reliability. Our approach combines three complementary signals: semantic alignment between internal representations and reference embeddings, internal convergence analysis across model layers, and learned confidence estimation. The unified confidence score determines routing to four pathways: local generation for high confidence, retrieval-augmented generation for medium confidence, larger models for low confidence, and human review for very low confidence. Evaluation on knowledge-intensive QA benchmarks demonstrates significant improvements in hallucination detection (0.74 vs. 0.42 baseline) while reducing computational costs by 40% compared to post-hoc methods. The F1 score improves from 0.61 to 0.82 with low false positive rates (0.09). This paradigm shift from reactive correction to proactive assessment offers a computationally efficient approach to LLM reliability enhancement.

Top-k decoding is a widely used method for sampling from LLMs: at each token, only the largest k next-token-probabilities are kept, and the next token is sampled after re-normalizing them to sum to unity. Top-k and other sampling methods are motivated by the intuition that true next-token distributions are sparse, and the noisy LLM probabilities need to be truncated. However, to our knowledge, a precise theoretical motivation for the use of top-k decoding is missing. In this work, we develop a theoretical framework that both explains and generalizes top-k decoding. We view decoding at a fixed token as the recovery of a sparse probability distribution. We consider Bregman decoders obtained by minimizing a separable Bregman divergence (for both the primal and dual cases) with a sparsity-inducing ell_0 regularization. Despite the combinatorial nature of the objective, we show how to optimize it efficiently for a large class of divergences. We show that the optimal decoding strategies are greedy, and further that the loss function is discretely convex in k, so that binary search provably and efficiently finds the optimal k. We show that top-k decoding arises as a special case for the KL divergence, and identify new decoding strategies that have distinct behaviors (e.g., non-linearly up-weighting larger probabilities after re-normalization).

Scaling test-time compute with multi-path chain-of-thought improves reasoning accuracy, but its effectiveness depends critically on the exploration-exploitation trade-off. Existing approaches address this trade-off in rigid ways: tree-structured search hard-codes exploration through brittle expansion rules that interfere with post-trained reasoning, while parallel reasoning over-explores redundant hypothesis paths and relies on weak answer selection. Motivated by the observation that the optimal balance is phase-dependent and that correct and incorrect reasoning paths often diverge only at late stages, we reformulate test-time scaling as a dynamic expand-reduce control problem over a pool of hypotheses. We propose HyPER, a training-free online control policy for multi-path decoding in mixture-of-experts models that reallocates computation under a fixed budget using lightweight path statistics. HyPER consists of an online controller that transitions from exploration to exploitation as the hypothesis pool evolves, a token-level refinement mechanism that enables efficient generation-time exploitation without full-path resampling, and a length- and confidence-aware aggregation strategy for reliable answer-time exploitation. Experiments on four mixture-of-experts language models across diverse reasoning benchmarks show that HyPER consistently achieves a superior accuracy-compute trade-off, improving accuracy by 8 to 10 percent while reducing token usage by 25 to 40 percent.

Mixture-of-Experts (MoE) language models suffer from large parameter counts, which create a significant memory bottleneck. Expert pruning is the most direct approach for reducing this parameter count, yet existing methods make pruning decisions for each expert independently, and assume experts' contributions are purely additive. In reality, expert usage in MoEs is inherently cooperative. We derive HOPE (Higher-Order Pruning of Experts), a second-order pruning objective which provably minimizes an upper bound on the error resulting from pruning. We show that REAP (a state-of-the-art first-order pruning method) is a special case of HOPE where interaction terms are ignored. Across three frontier MoE models (up to 122B parameters), two distinct calibration sets, and multiple benchmarks (including math, instruction following, coding, and an agentic suite), we demonstrate that HOPE produces better pruning decisions than existing methods, and its advantage is most pronounced at high pruning rates and on challenging agentic workloads. At 50% pruning, HOPE outperforms all baselines and achieves an average rank of 1.58 out of 5 methods (versus 2.42 for the next-best method, REAP), with gains of up to +6.1% on agentic coding. Over all conditions, HOPE again achieves the best average rank and surpasses every other method in the majority of head-to-head comparisons. By preserving cooperative expert structure that first-order methods ignore, HOPE enables aggressive compression with minimal degradation, particularly on complex tasks where diverse expert combinations are invoked over long sequences.

Semi-supervised learning is attracting blooming attention, due to its success in combining unlabeled data. To mitigate potentially incorrect pseudo labels, recent frameworks mostly set a fixed confidence threshold to discard uncertain samples. This practice ensures high-quality pseudo labels, but incurs a relatively low utilization of the whole unlabeled set. In this work, our key insight is that these uncertain samples can be turned into certain ones, as long as the confusion classes for the top-1 class are detected and removed. Invoked by this, we propose a novel method dubbed ShrinkMatch to learn uncertain samples. For each uncertain sample, it adaptively seeks a shrunk class space, which merely contains the original top-1 class, as well as remaining less likely classes. Since the confusion ones are removed in this space, the re-calculated top-1 confidence can satisfy the pre-defined threshold. We then impose a consistency regularization between a pair of strongly and weakly augmented samples in the shrunk space to strive for discriminative representations. Furthermore, considering the varied reliability among uncertain samples and the gradually improved model during training, we correspondingly design two reweighting principles for our uncertain loss. Our method exhibits impressive performance on widely adopted benchmarks. Code is available at https://github.com/LiheYoung/ShrinkMatch.

Large Language Models (LLMs) have achieved remarkable success across many applications, with Mixture of Experts (MoE) models demonstrating great potential. Compared to traditional dense models, MoEs achieve better performance with less computation. Speculative decoding (SD) is a widely used technique to accelerate LLM inference without accuracy loss, but it has been considered efficient only for dense models. In this work, we first demonstrate that, under medium batch sizes, MoE surprisingly benefits more from SD than dense models. Furthermore, as MoE becomes sparser -- the prevailing trend in MoE designs -- the batch size range where SD acceleration is expected to be effective becomes broader. To quantitatively understand tradeoffs involved in SD, we develop a reliable modeling based on theoretical analyses. While current SD research primarily focuses on improving acceptance rates of algorithms, changes in workload and model architecture can still lead to degraded SD acceleration even with high acceptance rates. To address this limitation, we introduce a new metric 'target efficiency' that characterizes these effects, thus helping researchers identify system bottlenecks and understand SD acceleration more comprehensively. For scenarios like private serving, this work unveils a new perspective to speed up MoE inference, where existing solutions struggle. Experiments on different GPUs show up to 2.29x speedup for Qwen2-57B-A14B at medium batch sizes and validate our theoretical predictions.

Large Language Models (LLMs) that can continually improve beyond their training budgets are able to solve increasingly difficult problems by adapting at test time, a property we refer to as extrapolation. However, standard reinforcement learning (RL) operates over fixed problem distributions and training budgets, which limits extrapolation amidst distribution shift at test time. To address this, we introduce RC, an iterative decoding algorithm that replaces standard autoregressive decoding during both training and inference. RC exploits an asymmetry between the response generation and summarization capabilities of LLMs to construct reasoning chains that consistently improve across iterations. Models trained to use RC can extrapolate and continually improve over reasoning horizons more than an order of magnitude longer than those seen during training. Empirically, training a 4B model with RC using a 16k-token training budget improves performance on HMMT 2025 from 40% to nearly 70% with 0.5m tokens at test time, outperforming both comparably sized models and many larger reasoning LLMs. Finally, we also show that models trained with RC can more effectively leverage existing scaffolds to further scale test-time performance, due to the improved summary-conditioned generation abilities learned through training.

Large language models (LLMs) and large vision-language models (LVLMs) have demonstrated impressive generative capabilities, yet ensuring their outputs align with user intent is still challenging. While most existing approaches address this issue at the training stage, inference-time approaches like decoding methods offer a more efficient and scalable solution. Decoding methods control model generation by guiding token-level selection, performing sequence-level generation, or generating tokens in parallel to accelerate the process. In this survey, we identify three emerging paradigms from recent works on decoding methods for LLMs and LVLMs, provide a systematic review of these methods, highlight ongoing challenges, and discuss potential future research directions. Our goal is to underscore the efficiency and effectiveness of decoding methods and offer a practical view of their applications. Paper lists and more resources on decoding methods for LLMs and LVLMs can be found at https://github.com/wang2226/Awesome-LLM-Decoding.

While Mixture-of-Experts (MoE) scales model capacity without proportionally increasing computation, its massive total parameter footprint creates significant storage and memory-access bottlenecks, which hinder efficient end-side deployment that simultaneously requires high performance, low computational cost, and small storage overhead. To achieve these properties, we present DECO, a sparse MoE architecture designed to match the performance of dense Transformers under identical total parameter budgets and training tokens. DECO utilizes the differentiable and flexible ReLU-based routing enhanced by learnable expert-wise scaling, which adaptively balances the contributions of routed and shared experts. Furthermore, we introduce NormSiLU, an activation function that normalizes inputs prior to SiLU operators, producing a more stable trend of routed-expert activation ratio and a higher intrinsic sparsity level. We also identify an empirical advantage in using non-gated MLP experts with ReLU-based routing, indicating the possibility of MoE architecture simplification. Experiments demonstrate that DECO, activating only 20% of experts, matches dense performance and outperforms established MoE baselines. Our specialized acceleration kernel delivers a 3.00times speedup on real hardware compared with dense inference. Codes and checkpoints will be released.

Contrastive decoding (CD) (Li et al., 2023) improves the next-token distribution of a large expert language model (LM) using a small amateur LM. Although CD is applied to various LMs and domains to enhance open-ended text generation, it is still unclear why CD often works well, when it could fail, and how we can make it better. To deepen our understanding of CD, we first theoretically prove that CD could be viewed as linearly extrapolating the next-token logits from a huge and hypothetical LM. We also highlight that the linear extrapolation could make CD unable to output the most obvious answers that have already been assigned high probabilities by the amateur LM. To overcome CD's limitation, we propose a new unsupervised decoding method called Asymptotic Probability Decoding (APD). APD explicitly extrapolates the probability curves from the LMs of different sizes to infer the asymptotic probabilities from an infinitely large LM without inducing more inference costs than CD. In FactualityPrompts, an open-ended text generation benchmark, sampling using APD significantly boosts factuality in comparison to the CD sampling and its variants, and achieves state-of-the-art results for Pythia 6.9B and OPT 6.7B. Furthermore, in five commonsense QA datasets, APD is often significantly better than CD and achieves a similar effect of using a larger LLM. For example, the perplexity of APD on top of Pythia 6.9B is even lower than the perplexity of Pythia 12B in CommonsenseQA and LAMBADA.

Autoregressive large language models achieve strong results on many benchmarks, but decoding remains fundamentally latency-limited by sequential dependence on previously generated tokens. Diffusion language models (DLMs) promise parallel generation but suffer from a fundamental static-to-dynamic misalignment: Training optimizes local transitions under fixed schedules, whereas efficient inference requires adaptive "long-jump" refinements through unseen states. Our goal is to enable highly parallel decoding for DLMs with low number of function evaluations while preserving generation quality. To achieve this, we propose CD4LM, a framework that decouples training from inference via Discrete-Space Consistency Distillation (DSCD) and Confidence-Adaptive Decoding (CAD). Unlike standard objectives, DSCD trains a student to be trajectory-invariant, mapping diverse noisy states directly to the clean distribution. This intrinsic robustness enables CAD to dynamically allocate compute resources based on token confidence, aggressively skipping steps without the quality collapse typical of heuristic acceleration. On GSM8K, CD4LM matches the LLaDA baseline with a 5.18x wall-clock speedup; across code and math benchmarks, it strictly dominates the accuracy-efficiency Pareto frontier, achieving a 3.62x mean speedup while improving average accuracy. Code is available at https://github.com/yihao-liang/CDLM

Autoregressive decoding in large language models (LLMs) requires O(n) sequential steps for n tokens, fundamentally limiting inference throughput. Recent diffusion-based LLMs (dLLMs) enable parallel token generation through iterative denoising. However, current parallel decoding strategies rely on fixed, input-agnostic heuristics (e.g., confidence thresholds), which fail to adapt to input-specific characteristics, resulting in suboptimal speed-quality trade-offs across diverse NLP tasks. In this work, we explore a more flexible and dynamic approach to parallel decoding. We propose Learning to Parallel Decode (Learn2PD), a framework that trains a lightweight and adaptive filter model to predict, for each token position, whether the current prediction matches the final output. This learned filter approximates an oracle parallel decoding strategy that unmasks tokens only when correctly predicted. Importantly, the filter model is learned in a post-training manner, requiring only a small amount of computation to optimize it (minute-level GPU time). Additionally, we introduce End-of-Text Prediction (EoTP) to detect decoding completion at the end of sequence, avoiding redundant decoding of padding tokens. Experiments on the LLaDA benchmark demonstrate that our method achieves up to 22.58times speedup without any performance drop, and up to 57.51times when combined with KV-Cache.

Masked language modeling is a widely used method for learning language representations, where the model predicts a randomly masked word in each input. However, this approach typically considers only a single correct answer during training, ignoring the variety of plausible alternatives that humans might choose. This issue becomes more pronounced when the input text is short, as the possible word distribution tends to have higher entropy, potentially causing the model to become overconfident in its predictions. To mitigate this, we propose a novel confidence regularizer that adaptively adjusts the regularization strength based on the input length. Experiments on the GLUE and SQuAD benchmarks show that our method improves both accuracy and expected calibration error

Diffusion large language models (dLLMs) represent a significant advancement in text generation, offering parallel token decoding capabilities. However, existing open-source implementations suffer from quality-speed trade-offs that impede their practical deployment. Conservative sampling strategies typically decode only the most confident token per step to ensure quality (i.e., greedy decoding), at the cost of inference efficiency due to repeated redundant refinement iterations--a phenomenon we term delayed decoding. Through systematic analysis of dLLM decoding dynamics, we characterize this delayed decoding behavior and propose a training-free adaptive parallel decoding strategy, named LocalLeap, to address these inefficiencies. LocalLeap is built on two fundamental empirical principles: local determinism propagation centered on high-confidence anchors and progressive spatial consistency decay. By applying these principles, LocalLeap identifies anchors and performs localized relaxed parallel decoding within bounded neighborhoods, achieving substantial inference step reduction through early commitment of already-determined tokens without compromising output quality. Comprehensive evaluation on various benchmarks demonstrates that LocalLeap achieves 6.94times throughput improvements and reduces decoding steps to just 14.2\% of the original requirement, achieving these gains with negligible performance impact. The source codes are available at: https://github.com/friedrichor/LocalLeap.

Generalizing Multimodal Large Language Models (MLLMs) to novel video domains is essential for real-world deployment but remains challenging due to the scarcity of labeled data. While In-Context Learning (ICL) offers a training-free adaptation path, standard methods rely on large annotated pools, which are often impractical in specialized environments like industrial or surgical settings since they require the experts' annotations. To bridge this gap, we introduce VIOLA (Video In-cOntext Learning with minimal Annotation), a label-efficient framework that synergizes minimal expert supervision with abundant unlabeled data. First, to maximize the efficiency of a strict annotation budget, we propose density-uncertainty-weighted sampling. Unlike standard diversity or uncertainty strategies that risk selecting visual outliers, our method leverages density estimation to identify samples that are simultaneously diverse, representative, and informative. Second, to utilize the remaining unlabeled data without noise propagation, we construct a hybrid pool and introduce confidence-aware retrieval and confidence-aware prompting. These mechanisms explicitly model label reliability, retrieving demonstrations based on a composite score of similarity and confidence while enabling the MLLM to adaptively distinguish between verified ground truths and noisy pseudo-labels. Extensive experiments across nine diverse benchmarks using four MLLMs demonstrate that our framework significantly outperforms various baselines in low-resource settings, achieving robust adaptation with minimal annotation costs.

We consider the problem of ranking n experts based on their performances on d tasks. We make a monotonicity assumption stating that for each pair of experts, one outperforms the other on all tasks. We consider the sequential setting where in each round, the learner has access to noisy evaluations of actively chosen pair of expert-task, given the information available up to the actual round. Given a confidence parameter delta in (0, 1), we provide strategies allowing to recover the correct ranking of experts and develop a bound on the total number of queries made by our algorithm that hold with probability at least 1 -- delta. We show that our strategy is adaptive to the complexity of the problem (our bounds are instance dependent), and develop matching lower bounds up to a poly-logarithmic factor. Finally, we adapt our strategy to the relaxed problem of best expert identification and provide numerical simulation consistent with our theoretical results.

Speculative decoding has emerged as a popular method to accelerate the inference of Large Language Models (LLMs) while retaining their superior text generation performance. Previous methods either adopt a fixed speculative decoding configuration regardless of the prefix tokens, or train draft models in an offline or online manner to align them with the context. This paper proposes a training-free online learning framework to adaptively choose the configuration of the hyperparameters for speculative decoding as text is being generated. We first formulate this hyperparameter selection problem as a Multi-Armed Bandit problem and provide a general speculative decoding framework BanditSpec. Furthermore, two bandit-based hyperparameter selection algorithms, UCBSpec and EXP3Spec, are designed and analyzed in terms of a novel quantity, the stopping time regret. We upper bound this regret under both stochastic and adversarial reward settings. By deriving an information-theoretic impossibility result, it is shown that the regret performance of UCBSpec is optimal up to universal constants. Finally, extensive empirical experiments with LLaMA3 and Qwen2 demonstrate that our algorithms are effective compared to existing methods, and the throughput is close to the oracle best hyperparameter in simulated real-life LLM serving scenarios with diverse input prompts.

Scaling the test-time compute of large language models has demonstrated impressive performance on reasoning benchmarks. However, existing evaluations of test-time scaling make the strong assumption that a reasoning system should always give an answer to any question provided. This overlooks concerns about whether a model is confident in its answer, and whether it is appropriate to always provide a response. To address these concerns, we extract confidence scores during reasoning for thresholding model responses. We find that increasing compute budget at inference time not only helps models answer more questions correctly, but also increases confidence in correct responses. We then extend the current paradigm of zero-risk responses during evaluation by considering settings with non-zero levels of response risk, and suggest a recipe for reporting evaluations under these settings.

Multimodal Large Language Models (MLLMs) are increasingly deployed in real-world applications, yet their ability to make context-aware safety decisions remains limited. Existing methods often fail to balance oversensitivity (unjustified refusals of benign queries) and undersensitivity (missed detection of visually grounded risks), leaving a persistent gap in safety alignment. To address this issue, we introduce Safety-aware Contrastive Decoding (SafeCoDe), a lightweight and model-agnostic decoding framework that dynamically adjusts token generation based on multimodal context. SafeCoDe operates in two stages: (1) a contrastive decoding mechanism that highlights tokens sensitive to visual context by contrasting real and Gaussian-noised images, and (2) a global-aware token modulation strategy that integrates scene-level reasoning with token-level adjustment to adapt refusals according to the predicted safety verdict. Extensive experiments across diverse MLLM architectures and safety benchmarks, covering undersensitivity, oversensitivity, and general safety evaluations, show that SafeCoDe consistently improves context-sensitive refusal behaviors while preserving model helpfulness.

We introduce a simple, yet novel entropy-based framework to drive token efficiency in large language models during reasoning tasks. Our approach uses Shannon entropy from token-level logprobs as a confidence signal to enable early stopping, achieving 25-50% computational savings while maintaining task accuracy. Crucially, we demonstrate that entropy-based confidence calibration represents an emergent property of advanced post-training optimization present in modern reasoning models but notably absent in standard instruction-tuned and pre-trained models (Llama 3.3 70B). We show that the entropy threshold to stop reasoning varies from model to model but can be calculated easily in one shot using only a few examples from existing reasoning datasets. Our results indicate that advanced reasoning models often know that they've gotten a correct answer early on, and that this emergent confidence awareness can be exploited to save tokens and reduce latency. The framework demonstrates consistent performance across reasoning-optimized model families with 25-50% computational cost reduction while preserving accuracy, revealing that confidence mechanisms represent a distinguishing characteristic of modern post-trained reasoning systems versus their predecessors.

Efficient inference in large language models (LLMs) has become a critical focus as their scale and complexity grow. Traditional autoregressive decoding, while effective, suffers from computational inefficiencies due to its sequential token generation process. Speculative decoding addresses this bottleneck by introducing a two-stage framework: drafting and verification. A smaller, efficient model generates a preliminary draft, which is then refined by a larger, more sophisticated model. This paper provides a comprehensive survey of speculative decoding methods, categorizing them into draft-centric and model-centric approaches. We discuss key ideas associated with each method, highlighting their potential for scaling LLM inference. This survey aims to guide future research in optimizing speculative decoding and its integration into real-world LLM applications.

While confidence estimation is a promising direction for mitigating hallucinations in Large Language Models (LLMs), current research dominantly focuses on single-turn settings. The dynamics of model confidence in multi-turn conversations, where context accumulates and ambiguity is progressively resolved, remain largely unexplored. Reliable confidence estimation in multi-turn settings is critical for many downstream applications, such as autonomous agents and human-in-the-loop systems. This work presents the first systematic study of confidence estimation in multi-turn interactions, establishing a formal evaluation framework grounded in two key desiderata: per-turn calibration and monotonicity of confidence as more information becomes available. To facilitate this, we introduce novel metrics, including a length-normalized Expected Calibration Error (InfoECE), and a new "Hinter-Guesser" paradigm for generating controlled evaluation datasets. Our experiments reveal that widely-used confidence techniques struggle with calibration and monotonicity in multi-turn dialogues. We propose P(Sufficient), a logit-based probe that achieves comparatively better performance, although the task remains far from solved. Our work provides a foundational methodology for developing more reliable and trustworthy conversational agents.

Decoding methods play an indispensable role in converting language models from next-token predictors into practical task solvers. Prior research on decoding methods, primarily focusing on task-specific models, may not extend to the current era of general-purpose large language models (LLMs). Moreover, the recent influx of decoding strategies has further complicated this landscape. This paper provides a comprehensive and multifaceted analysis of various decoding methods within the context of LLMs, evaluating their performance, robustness to hyperparameter changes, and decoding speeds across a wide range of tasks, models, and deployment environments. Our findings reveal that decoding method performance is notably task-dependent and influenced by factors such as alignment, model size, and quantization. Intriguingly, sensitivity analysis exposes that certain methods achieve superior performance at the cost of extensive hyperparameter tuning, highlighting the trade-off between attaining optimal results and the practicality of implementation in varying contexts.

We present a novel framework for training large language models with continuously adjustable internal representations that span the full spectrum from localist (interpretable, rule-based) to distributed (generalizable, efficient) encodings. The key innovation is a locality dial, a tunable parameter that dynamically controls the degree of localization during both training and inference without requiring model retraining. This is achieved through group sparsity penalties on attention mechanisms, information-theoretic anchor design, and dynamic rule injection. We provide rigorous mathematical proofs establishing explicit threshold conditions under which attention provably concentrates on semantically relevant blocks, with exponential bounds on attention entropy and pointer fidelity. Specifically, we prove that when group sparsity penalties exceed certain threshold values, the model's attention mechanisms concentrate on semantically relevant blocks, achieving low entropy and high fidelity with negligible error. This framework enables practitioners to continuously interpolate between interpretable and high-performance modes, supporting applications in regulated domains requiring both transparency and capability.

Inference-time scaling has emerged as a powerful paradigm for improving large language model reasoning, often delivering larger gains on difficult reasoning tasks than parameter scaling alone. However, existing approaches remain inefficient in how compute is allocated within a reasoning trace. Motivated by the observation that reasoning failures often exhibit an early onset of uncertainty before a wrong answer become explicit, we introduce DeepLook, a training-free monitor-and-intervene decoding framework that concentrates lookahead compute at uncertainty bottlenecks. DeepLook aggregates token-level confidence into segment-level signals, triggers when confidence drops relative to recent history, and explores candidate continuations with fixed-horizon lookahead. Branches are ranked by Average Lookahead Confidence (ALC), the average segment-level confidence over rollout continuations, then pruned and aggregated through voting. On four competition-style mathematics benchmarks across DeepSeek-R1-8B, Qwen3-32B, GPT-OSS-20B, and GPT-OSS-120B, DeepLook shifts the accuracy--token-cost Pareto frontier: it improves accuracy over DeepConf-low in 11 of 16 settings while reducing dataset-level token generation by 87.3% on average, including gains of +3.1 on AIME25 with Qwen3-32B and +8.8 on BRUMO25 with GPT-OSS-20B. These results show that selective, future-aware intervention yields substantially stronger accuracy--cost trade-offs than uniformly scaling complete reasoning trajectories. Code is available here.

Sparse Mixture-of-Experts (SMoE) language models achieve strong capability at low per-token compute, yet deployment remains memory- and throughput-bound because the full expert pool must be stored and served. Post-training expert pruning reduces this cost, but most methods focus on which experts to prune within each layer and default to a uniform layer-wise sparsity allocation, even though the allocation can strongly affect performance. We decouple pruning into within-layer expert ranking and across-layer budget allocation, and introduce Expected Speculative Acceptance Proxy (ESAP), a speculative-decoding-inspired, teacher-forced metric that measures how well a pruned model matches the full model. ESAP is bounded and stable, enabling cheap comparison of many candidates without costly autoregressive decoding. Building on ESAP, we propose EvoESAP, an evolutionary searching framework that optimizes a non-uniform layer-wise sparsity allocation under a fixed global budget while holding the within-layer pruning order fixed, making it a plug-and-play method with criteria such as Frequency, EAN, SEER, and REAP. Across 7B--30B SMoE LLMs at 25\% and 50\% sparsity, EvoESAP consistently discovers non-uniform allocations that improve open-ended generation (up to +19.6\% on MATH-500 at 50\% sparsity) while preserving competitive multiple-choice accuracy compared with uniform pruning at the same sparsity.

Although Large Vision-Language Models (LVLMs) have achieved impressive results, their high computational cost poses a significant barrier to wider application. To enhance inference efficiency, most existing approaches depend on parameter-dependent or token-dependent strategies to reduce computational demands. However, these methods typically require complex training processes and struggle to consistently select the most relevant tokens. In this paper, we systematically analyze the above challenges and provide a series of valuable insights for inference acceleration. Based on these findings, we propose a novel framework, the Pruning All-Rounder (PAR). Different from previous works, PAR develops a meta-router to adaptively organize pruning flows across both tokens and layers. With a self-supervised learning manner, our method achieves a superior balance between performance and efficiency. Notably, PAR is highly flexible, offering multiple pruning versions to address a range of pruning scenarios. The code for this work will be made publicly available.

Diffusion large language models (dLLMs) have recently drawn considerable attention within the research community as a promising alternative to autoregressive generation, offering parallel token prediction and lower inference latency. Yet, their parallel decoding potential remains largely underexplored, as existing open-source models still require nearly token-length decoding steps to ensure performance. To address this, we introduce dParallel, a simple and effective method that unlocks the inherent parallelism of dLLMs for fast sampling. We identify that the key bottleneck to parallel decoding arises from the sequential certainty convergence for masked tokens. Building on this insight, we introduce the core of our approach: certainty-forcing distillation, a novel training strategy that distills the model to follow its original sampling trajectories while enforcing it to achieve high certainty on masked tokens more rapidly and in parallel. Extensive experiments across various benchmarks demonstrate that our method can dramatically reduce the number of decoding steps while maintaining performance. When applied to the LLaDA-8B-Instruct model, dParallel reduces decoding steps from 256 to 30 on GSM8K, achieving an 8.5x speedup without performance degradation. On the MBPP benchmark, it cuts decoding steps from 256 to 24, resulting in a 10.5x speedup while maintaining accuracy. Our code is available at https://github.com/czg1225/dParallel

Large vision-language models suffer from visual ungroundedness: they can produce a fluent, confident, and even correct response driven entirely by language priors, with the image contributing nothing to the prediction. Existing confidence estimation methods cannot detect this, as they observe model behavior under normal inference with no mechanism to determine whether a prediction was shaped by the image or by text alone. We introduce BICR (Blind-Image Contrastive Ranking), a model-agnostic confidence estimation framework that makes this contrast explicit during training by extracting hidden states from a frozen LVLM twice: once with the real image-question pair, and once with the image blacked out while the question is held fixed. A lightweight probe is trained on the real-image hidden state and regularized by a ranking loss that penalizes higher confidence on the blacked-out view, teaching it to treat visual grounding as a signal of reliability at zero additional inference cost. Evaluated across five modern LVLMs and seven baselines on a benchmark covering visual question answering, object hallucination detection, medical imaging, and financial document understanding, BICR achieves the best cross-LVLM average on both calibration and discrimination simultaneously, with statistically significant discrimination gains robust to cluster-aware analysis at 4-18x fewer parameters than the strongest probing baseline.

Fast, scalable decoding architectures that operate in a block-wise parallel fashion across space and time are essential for real-time fault-tolerant quantum computing. We introduce a scalable AI-based pre-decoder for the surface code that performs local, parallel error correction with low decoding runtimes, removing the majority of physical errors before passing residual syndromes to a downstream global decoder. This modular architecture is backend-agnostic and composes with arbitrary global decoding algorithms designed for surface codes, and our implementation is completely open source. Integrated with uncorrelated PyMatching, the pipeline achieves end-to-end decoding runtimes of order O(1 μs) per round at large code distances on NVIDIA GB300 GPUs while reducing logical error rates (LERs) relative to global decoding alone. In a block-wise parallel decoding scheme with access to multiple GPUs, the decoding runtime can be reduced to well below O(1 μs) per round. We observe further LER improvements by training a larger model, outperforming correlated PyMatching up to distance-13. We additionally introduce a noise-learning architecture that infers decoding weights directly from experimentally accessible syndrome statistics without requiring an explicit circuit-level noise model. We show that purely data-driven graph weight estimation can nearly match uncorrelated PyMatching and exceed correlated PyMatching in certain regimes, enabling highly-optimized decoding when hardware noise models are unknown or time-varying, as well as training pre-decoders with realistic noise models. Together, these results establish a practical, modular, and high-throughput decoding framework suitable for large-distance surface-code implementations.

Masked Diffusion Models (MDMs) offer greater flexibility in decoding order than autoregressive models but require careful planning to achieve high-quality generation. Existing samplers typically adopt greedy heuristics, prioritizing positions with the highest local certainty to decode at each step. Through failure case analysis, we identify a fundamental limitation of this approach: it neglects the downstream impact of current decoding choices on subsequent steps and fails to minimize cumulative uncertainty. In particular, these methods do not fully exploit the non-causal nature of MDMs, which enables evaluating how a decoding decision reshapes token probabilities/uncertainty across all remaining masked positions. To bridge this gap, we propose the Info-Gain Sampler, a principled decoding framework that balances immediate uncertainty with information gain over future masked tokens. Extensive evaluations across diverse architectures and tasks (reasoning, coding, creative writing, and image generation) demonstrate that Info-Gain Sampler consistently outperforms existing samplers for MDMs. For instance, it achieves a 3.6% improvement in average accuracy on reasoning tasks and a 63.1% win-rate in creative writing. Notably, on reasoning tasks it reduces cumulative uncertainty from 78.4 to 48.6, outperforming the best baseline by a large margin. The code will be available at https://github.com/yks23/Information-Gain-Sampler.

Modern language models (LMs) tend to memorize portions of their training data and emit verbatim spans. When the underlying sources are sensitive or copyright-protected, such reproduction raises issues of consent and compensation for creators and compliance risks for developers. We propose Anchored Decoding, a plug-and-play inference-time method for suppressing verbatim copying: it enables decoding from any risky LM trained on mixed-license data by keeping generation in bounded proximity to a permissively trained safe LM. Anchored Decoding adaptively allocates a user-chosen information budget over the generation trajectory and enforces per-step constraints that yield a sequence-level guarantee, enabling a tunable risk-utility trade-off. To make Anchored Decoding practically useful, we introduce a new permissively trained safe model (TinyComma 1.8B), as well as Anchored_{Byte} Decoding, a byte-level variant of our method that enables cross-vocabulary fusion via the ByteSampler framework (Hayase et al., 2025). We evaluate our methods across six model pairs on long-form evaluations of copyright risk and utility. Anchored and Anchored_{Byte} Decoding define a new Pareto frontier, preserving near-original fluency and factuality while eliminating up to 75% of the measurable copying gap (averaged over six copying metrics) between the risky baseline and a safe reference, at a modest inference overhead.

We introduce a principled probabilistic framework for reward-guided decoding in large language models, addressing the limitations of standard decoding methods that optimize token-level likelihood rather than sequence-level quality. Our method defines a reward-augmented target distribution over complete sequences by combining model transition probabilities with prefix-dependent reward potentials. Importantly, the approach is training-free: it leaves model weights unchanged and instead modifies the inference distribution via reward potentials, with all gains arising purely from inference-time sampling. To sample from this distribution, we develop Sequential Monte Carlo algorithms, including a computationally efficient prefix-only variant and a lookahead variant whose intermediate targets match the exact marginals of the full sequence distribution. The framework also integrates resample-move updates with Metropolis-Hastings rejuvenation and supports block-wise generation, subsuming common decoding strategies such as temperature sampling and power-tempered objectives. Empirical results across three 7B models show significant gains. On code generation (HumanEval), our method improves base performance by up to 54.9% and surpasses the strongest sampling baselines by 9.1%-15.3%. On mathematical reasoning (MATH500), it achieves gains of up to 8.8%. Notably, it reaches 87.8% on HumanEval and 78.4% on MATH500 with Qwen2.5-7B, consistently outperforming the reinforcement learning method GRPO.

While instruction-tuned language models have demonstrated impressive zero-shot generalization, these models often struggle to generate accurate responses when faced with instructions that fall outside their training set. This paper presents Instructive Decoding (ID), a simple yet effective approach that augments the efficacy of instruction-tuned models. Specifically, ID adjusts the logits for next-token prediction in a contrastive manner, utilizing predictions generated from a manipulated version of the original instruction, referred to as a noisy instruction. This noisy instruction aims to elicit responses that could diverge from the intended instruction yet remain plausible. We conduct experiments across a spectrum of such noisy instructions, ranging from those that insert semantic noise via random words to others like 'opposite' that elicit the deviated responses. Our approach achieves considerable performance gains across various instruction-tuned models and tasks without necessitating any additional parameter updates. Notably, utilizing 'opposite' as the noisy instruction in ID, which exhibits the maximum divergence from the original instruction, consistently produces the most significant performance gains across multiple models and tasks.

A critical component of a successful language generation pipeline is the decoding algorithm. However, the general principles that should guide the choice of decoding algorithm remain unclear. Previous works only compare decoding algorithms in narrow scenarios and their findings do not generalize across tasks. To better structure the discussion, we introduce a taxonomy that groups decoding strategies based on their implicit assumptions about how well the model's likelihood is aligned with the task-specific notion of utility. We argue that this taxonomy allows a broader view of the decoding problem and can lead to generalizable statements because it is grounded on the interplay between the decoding algorithms and the likelihood-utility misalignment. Specifically, by analyzing the correlation between the likelihood and the utility of predictions across a diverse set of tasks, we provide the first empirical evidence supporting the proposed taxonomy, and a set of principles to structure reasoning when choosing a decoding algorithm. Crucially, our analysis is the first one to relate likelihood-based decoding strategies with strategies that rely on external information such as value-guided methods and prompting, and covers the most diverse set of tasks up-to-date.

Existing Visual Speech Recognition (VSR) systems commonly rely on left-to-right autoregressive decoding, which can force premature decisions on visually ambiguous tokens before sufficient context is available. We propose DLLM-VSR, to the best of our knowledge, the first Diffusion Large Language Model (DLLM)-based VSR framework, formulating transcription as iterative masked denoising with flexible-order decoding. With confidence-based unmasking, DLLM-VSR commits high-confidence positions early and uses the committed tokens as bidirectional context to refine ambiguous ones. To adapt DLLMs to VSR, we introduce a two-stage masked-denoising training strategy that separates visual-to-text content alignment from length modeling. We further observe a performance gap with oracle-length decoding, which assumes access to the true transcript length, indicating that reducing target-length uncertainty can improve DLLM-based VSR. To reduce this gap, we develop length-guided candidate decoding, which uses video duration to construct plausible transcript-length hypotheses, decodes under multiple hypotheses, and reranks candidates using length plausibility and decoding confidence. The proposed method achieves a state-of-the-art WER of 19.5\% on LRS3 using only its labeled training data.

Large Vision-Language Models (LVLMs) integrate visual perception with language generation, enabling responses that span image understanding and complex reasoning. However, LVLMs do not just inherit the text-level hallucinations; they also hallucinate against the image, producing fluent responses ungrounded in what they see. This makes LVLM response scoring inherently harder, and our diagnostics show that existing confidence-based metrics adopted from LLMs are insufficient for LVLMs. Specifically, removing the input image barely changes confidence-based selection, suggesting that output-space confidence primarily captures textual plausibility rather than agreement with the image. To address this gap, we propose LookBack, a training-free LVLM response scoring method that augments token likelihood with visual lookback score, a lightweight measure of how strongly each response token refers to image tokens. Across four benchmarks and three models, LookBack consistently improves Best-of-N selection over existing baselines with negligible additional overhead.

Large language models (LLMs) have shown remarkable capabilities in code generation. However, the effects of hallucinations (e.g., output noise) make it particularly challenging for LLMs to generate high-quality code in one pass. In this work, we propose a simple and effective uncertainty-aware selective contrastive decoding (USCD) mechanism to improve the quality of one-pass code generation in LLMs and reduce the impact of output noise. To be specific, we first elaborately designed a negative prompt (namely lame prompt) to output noise by removing input-output examples from the standard few-shot prompt. Our preliminary study shows that the Jensen-Shannon divergence (JS divergence) between token distribution uncertainty and the output noise is relatively low (approximately 0.25), indicating their high relevance. Then, we selectively eliminate output noise induced by lame prompts based on the uncertainty of the prediction distribution from the standard prompt. Notably, our proposed plug-and-play mechanism is an inference-only method, enjoying appealing flexibility. Extensive experiments on widely used benchmarks, e.g., HumanEval, MBPP, and MultiPL-E, upon several LLMs (i.e., Inocder-6b, CodeLlama-7b, WizardCoder-15b, StarCoder, and Llama2-7b), demonstrate that our proposed USCD significantly improves one-pass code generation, with an average pass@1 scores increase of 16.59\%. We will release code and data on GitHub.

Speculative decoding reduces the inference latency of a target large language model via utilizing a smaller and faster draft model. Its performance depends on a hyperparameter K -- the candidate length, i.e., the number of candidate tokens for the target model to verify in each round. However, previous methods often use simple heuristics to choose K, which may result in sub-optimal performance. We study the choice of the candidate length K and formulate it as a Markov Decision Process. We theoretically show that the optimal policy of this Markov decision process takes the form of a threshold policy, i.e., the current speculation should stop and be verified when the probability of getting a rejection exceeds a threshold value. Motivated by this theory, we propose SpecDec++, an enhanced version of speculative decoding that adaptively determines the candidate length on the fly. We augment the draft model with a trained acceptance prediction head to predict the conditional acceptance probability of the candidate tokens. SpecDec++ will stop the current speculation when the predicted probability that at least one token gets rejected exceeds a threshold. We implement SpecDec++ and apply it to the llama-2-chat 7B & 70B model pair. Our adaptive method achieves a 2.04x speedup on the Alpaca dataset (an additional 7.2% improvement over the baseline speculative decoding). On the GSM8K and HumanEval datasets, our method achieves a 2.26x speedup (9.4% improvement) and 2.23x speedup (11.1% improvement), respectively.

Recent advances with large language models (LLM) illustrate their diverse capabilities. We propose a novel algorithm, staged speculative decoding, to accelerate LLM inference in small-batch, on-device scenarios. We address the low arithmetic intensity of small-batch inference by improving upon previous work in speculative decoding. First, we restructure the speculative batch as a tree, which reduces generation costs and increases the expected tokens per batch. Second, we add a second stage of speculative decoding. Taken together, we reduce single-batch decoding latency by 3.16x with a 762M parameter GPT-2-L model while perfectly preserving output quality.

While most autoregressive LLMs are constrained to one-by-one decoding, diffusion LLMs (dLLMs) have attracted growing interest for their potential to dramatically accelerate inference through parallel decoding. Despite this promise, the conditional independence assumption in dLLMs causes parallel decoding to ignore token dependencies, inevitably degrading generation quality when these dependencies are strong. However, existing works largely overlook these inherent challenges, and evaluations on standard benchmarks (e.g., math and coding) are not sufficient to capture the quality degradation caused by parallel decoding. To address this gap, we first provide an information-theoretic analysis of parallel decoding. We then conduct case studies on analytically tractable synthetic list operations from both data distribution and decoding strategy perspectives, offering quantitative insights that highlight the fundamental limitations of parallel decoding. Building on these insights, we propose ParallelBench, the first benchmark specifically designed for dLLMs, featuring realistic tasks that are trivial for humans and autoregressive LLMs yet exceptionally challenging for dLLMs under parallel decoding. Using ParallelBench, we systematically analyze both dLLMs and autoregressive LLMs, revealing that: (i) dLLMs under parallel decoding can suffer dramatic quality degradation in real-world scenarios, and (ii) current parallel decoding strategies struggle to adapt their degree of parallelism based on task difficulty, thus failing to achieve meaningful speedup without compromising quality. Our findings underscore the pressing need for innovative decoding methods that can overcome the current speed-quality trade-off. We release our benchmark to help accelerate the development of truly efficient dLLMs.

Feed-forward networks (FFNs) dominate the parameter count and computation of modern language models, yet existing pruning methods often struggle to convert sparsity into hardware-friendly inference efficiency gains. We introduce PrunePath, a budget-adaptive structured sparsification framework for FFN layers. Built on MoEfication, PrunePath replaces independent expert-wise thresholding with a softmax-normalized routing distribution and activates important experts under a cumulative-mass threshold. This formulation imposes a token-level probability budget, enabling adaptive expert counts and a direct inference-time sparsity knob from a single checkpoint. Across NLU, NLG, and instruction-tuning evaluations, PrunePath achieves a favorable sparsity--performance trade-off compared with existing static pruning and MoEfication-based methods. We further implement Triton kernels for KV-cache decoding to translate the resulting structured sparsity into practical memory savings and measurable decoding-speed improvements. These results demonstrate the superior performance of PrunePath for building highly sparse, deployment-friendly large language models.

This paper presents a novel technique for accelerating inference in large, pre-trained language models (LLMs) by introducing early exits during inference. The computational demands of these models, used across a wide range of applications, can be substantial. By capitalizing on the inherent variability in token complexity, our approach enables selective acceleration of the inference process. Specifically, we propose the integration of early exit ''heads'' atop existing transformer layers, which facilitate conditional terminations based on a confidence metric. These heads are trained in a self-supervised manner using the model's own predictions as training data, thereby eliminating the need for additional annotated data. The confidence metric, established using a calibration set, ensures a desired level of accuracy while enabling early termination when confidence exceeds a predetermined threshold. Notably, our method preserves the original accuracy and reduces computational time on certain tasks, leveraging the existing knowledge of pre-trained LLMs without requiring extensive retraining. This lightweight, modular modification has the potential to greatly enhance the practical usability of LLMs, particularly in applications like real-time language processing in resource-constrained environments.

Large language models (LLMs) often suffer from context faithfulness hallucinations, where outputs deviate from retrieved information due to insufficient context utilization and high output uncertainty. Our uncertainty evaluation experiments reveal a strong correlation between high uncertainty and hallucinations. We hypothesize that attention mechanisms encode signals indicative of contextual utilization, validated through probing analysis. Based on these insights, we propose Dynamic Attention-Guided Context Decoding (DAGCD), a lightweight framework that integrates attention distributions and uncertainty signals in a single-pass decoding process. Experiments across QA datasets demonstrate DAGCD's effectiveness, achieving significant improvements in faithfulness and robustness while maintaining computational efficiency.

Many recent reasoning gains in large language models can be explained as distribution sharpening: biasing generation toward high-likelihood trajectories already supported by the pretrained model, rather than modifying its weights. A natural formalization is the sequence-level power distribution π_α(ymid x)propto p_θ(ymid x)^α (α>1), which concentrates mass on whole sequences instead of adjusting token-level temperature. Prior work shows that Metropolis--Hastings (MH) sampling from this distribution recovers strong reasoning performance, but at order-of-magnitude inference slowdowns. We introduce Power-SMC, a training-free Sequential Monte Carlo scheme that targets the same objective while remaining close to standard decoding latency. Power-SMC advances a small particle set in parallel, corrects importance weights token-by-token, and resamples when necessary, all within a single GPU-friendly batched decode. We prove that temperature τ=1/α is the unique prefix-only proposal minimizing incremental weight variance, interpret residual instability via prefix-conditioned Rényi entropies, and introduce an exponent-bridging schedule that improves particle stability without altering the target. On MATH500, Power-SMC matches or exceeds MH power sampling while reducing latency from 16--28times to 1.4--3.3times over baseline decoding. The code is available at https://github.com/ArminAzizi98/Power-SMC.

Estimating uncertainty or confidence in the responses of a model can be significant in evaluating trust not only in the responses, but also in the model as a whole. In this paper, we explore the problem of estimating confidence for responses of large language models (LLMs) with simply black-box or query access to them. We propose a simple and extensible framework where, we engineer novel features and train a (interpretable) model (viz. logistic regression) on these features to estimate the confidence. We empirically demonstrate that our simple framework is effective in estimating confidence of flan-ul2, llama-13b and mistral-7b with it consistently outperforming existing black-box confidence estimation approaches on benchmark datasets such as TriviaQA, SQuAD, CoQA and Natural Questions by even over 10% (on AUROC) in some cases. Additionally, our interpretable approach provides insight into features that are predictive of confidence, leading to the interesting and useful discovery that our confidence models built for one LLM generalize zero-shot across others on a given dataset.

Sparse Mixture-of-Experts (MoE) models have become an important approach for scaling Large Language Models (LLMs), but their inference efficiency depends strongly on expert activation patterns. Speculative decoding (SD) accelerates autoregressive generation by verifying multiple draft tokens in parallel, yet existing draft selection strategies primarily optimize acceptance likelihood. In large-scale MoE models, however, selecting draft tokens also determines the union of experts activated during verification. We observe that confidence-driven SD can introduce expert scattering: high-probability draft tokens may route to disjoint experts, increasing expert-weight memory traffic and reducing the speedup from speculation. Motivated by this observation, we revisit draft-tree selection under the non-uniform memory-cost structure of MoE inference. We propose EcoSpec, a cost-aware speculative decoding framework that incorporates predicted marginal expert activation cost into draft selection. With a lightweight expert predictor and a dynamic expert buffer, EcoSpec favors draft paths that preserve high acceptance likelihood while reusing experts already covered by the current verification set, without modifying the target-model verification rule. We evaluate EcoSpec on three large-scale MoE models, including DeepSeek-V3.1 (671B), Qwen3-235B-A22B, and GPT-OSS-120B, across reasoning, coding, question-answering, and dialogue benchmarks. EcoSpec consistently reduces active expert footprints and improves end-to-end decoding speed, achieving up to 1.62times speedup. These results show that accounting for expert activation cost is important for efficient speculative decoding in large-scale MoE models.

Existing speculative decoding methods typically require additional model structure and training processes to assist the model for draft token generation. This makes the migration of acceleration methods to the new model more costly and more demanding on device memory. To address this problem, we propose the Make Some Noise (MSN) training framework as a replacement for the supervised fine-tuning stage of the large language model. The training method simply introduces some noise at the input for the model to learn the denoising task. It significantly enhances the parallel decoding capability of the model without affecting the original task capability. In addition, we propose a tree-based retrieval-augmented Jacobi (TR-Jacobi) decoding strategy to further improve the inference speed of MSN models. Experiments in both the general and code domains have shown that MSN can improve inference speed by 2.3-2.7x times without compromising model performance. The MSN model also achieves comparable acceleration ratios to the SOTA model with additional model structure on Spec-Bench.

Speculative decoding accelerates inference by using a lightweight draft model to generate candidate tokens in parallel, and are then verified by the target model, enabling lossless acceleration. Recently, diffusion-based speculative decoding further improves parallelism by generating multiple tokens per forward pass via block-level diffusion, achieving state-of-the-art (SOTA) performance. However, existing methods adopt a fixed inference block size and assume a uniform optimal decoding strategy across all inputs. In this paper, we show that this assumption is suboptimal, as the optimal block size varies across samples and plays a critical role in speculative decoding performance. Moreover, these values exhibit a clear local structure, concentrating around the training block size, which reduces the problem to a low-dimensional and structured decision space. Based on these insights, we propose BlockPilot, a sample-adaptive policy that predicts the optimal block size from the prefilling representation. Specifically, we formulate block size selection as a lightweight policy learning problem and propose an instance-adaptive decision mechanism that predicts the optimal block size based on the representation of the prefilling stage. The prediction is performed only once after prefilling, allowing for seamless integration. Extensive experiments demonstrate that our method is plug-and-play, introduces minimal overhead, and consistently improves efficiency, achieving an acceptance length of 5.92 and a 4.20times speedup on Qwen3-4B under temperature T=1.

While large language models (LLMs) have demonstrated remarkable performance across diverse tasks, they fundamentally lack self-awareness and frequently exhibit overconfidence, assigning high confidence scores to incorrect predictions. Accurate confidence estimation is therefore critical for enhancing the trustworthiness and reliability of LLM-generated outputs. However, existing approaches suffer from coarse-grained scoring mechanisms that fail to provide fine-grained, continuous confidence estimates throughout the generation process. To address these limitations, we introduce FineCE, a novel confidence estimation method that delivers accurate, fine-grained confidence scores during text generation. Specifically, we first develop a comprehensive pipeline for constructing training data that effectively captures the underlying probabilistic distribution of LLM responses, and then train a model to predict confidence scores for arbitrary text sequences in a supervised manner. Furthermore, we propose a Backward Confidence Integration (BCI) strategy that leverages information from the subsequent text to enhance confidence estimation for the current sequence during inference. We also introduce three strategies for identifying optimal positions to perform confidence estimation within the generation process. Extensive experiments on multiple benchmark datasets demonstrate that FineCE consistently outperforms existing classical confidence estimation methods. Our code and all baselines used in the paper are available on GitHub.

Speculative decoding (SD) has become a popular technique to accelerate Large Language Model (LLM) inference, yet its real-world effectiveness remains unclear as prior evaluations rely on research prototypes and unrealistically small batch sizes. We present, to our knowledge, the first systematic study of SD on a production-grade and widely deployed inference engine (vLLM), covering multiple SD variants (n-gram, EAGLE/EAGLE-3, Draft-Model, Multi-Token Prediction) across diverse workloads, model scales, and batch sizes. We analyze key factors governing SD performance, and quantify a theoretical upper bound on SD speedup. Our results show that verification by the target model dominates the execution, while acceptance length varies markedly across output token positions, requests, and datasets. Comparing measured performance with theoretical bounds reveals substantial gaps between observed and theoretical upper bounds, and we leverage this observation to highlight new research opportunities that our study opens up in improving SD.

The end-to-end nature of neural machine translation (NMT) removes many ways of manually guiding the translation process that were available in older paradigms. Recent work, however, has introduced a new capability: lexically constrained or guided decoding, a modification to beam search that forces the inclusion of pre-specified words and phrases in the output. However, while theoretically sound, existing approaches have computational complexities that are either linear (Hokamp and Liu, 2017) or exponential (Anderson et al., 2017) in the number of constraints. We present a algorithm for lexically constrained decoding with a complexity of O(1) in the number of constraints. We demonstrate the algorithms remarkable ability to properly place these constraints, and use it to explore the shaky relationship between model and BLEU scores. Our implementation is available as part of Sockeye.

The memory-bound nature of the decoding stage of large language model (LLM) inference incurs significant latency. Layer-wise training-free network pruning approaches guided by the Hessian have been a prominent solution to this problem, as pruning reduces the number of nonzero parameters read from memory during decoding. Nevertheless, typical methods in this line compute the Hessian using pre-collected natural sequences, whereas the model is fed self-generated tokens during decoding, creating a distribution shift between the two sequences. The Hessian calculated on the natural sequence is different from that calculated on the generated sequence. We observe that this discrepancy causes the activation distribution during generation to deviate from that used for pruning, further hurting the pruned model performance. Moreover, most existing LLM pruning methods that bring actual speedup primarily target the sparse matrix-matrix (SpMM) multiplication, providing limited support for the sparse matrix-vector (SpMV) operations, which dominate decoding. To solve these problems, we introduce SparseDecoding, a principled decoding-aware pruning framework tailored for accurate and efficient LLM decoding. Specifically, at the algorithmic axis, SparseDecoding constructs calibration matrices from layer-wise activations collected during the dense-model autoregressive generation, excluding prefill, thereby aligning the pruning objective with the decoding activations. At the system axis, we develop an optimized N:M sparse matrix-vector kernel with bitmask indexing and fixed-step traversal. Substantial empirical results on representative LLMs (Llama-3.1-8B, Llama-3.3-70B, Qwen3-14B / 32B) demonstrate that our method consistently outperforms standard fixed-text calibration on the long-form generation benchmarks while achieving up to 1.48x end-to-end wall-clock decoding speedup on A100 GPUs.

Despite the remarkable success of deep neural networks in a myriad of settings, several works have demonstrated their overwhelming sensitivity to near-imperceptible perturbations, known as adversarial attacks. On the other hand, prior works have also observed that deep networks can be under-sensitive, wherein large-magnitude perturbations in input space do not induce appreciable changes to network activations. In this work, we study in detail the phenomenon of under-sensitivity in vision models such as CNNs and Transformers, and present techniques to study the geometry and extent of "equi-confidence" level sets of such networks. We propose a Level Set Traversal algorithm that iteratively explores regions of high confidence with respect to the input space using orthogonal components of the local gradients. Given a source image, we use this algorithm to identify inputs that lie in the same equi-confidence level set as the source image despite being perceptually similar to arbitrary images from other classes. We further observe that the source image is linearly connected by a high-confidence path to these inputs, uncovering a star-like structure for level sets of deep networks. Furthermore, we attempt to identify and estimate the extent of these connected higher-dimensional regions over which the model maintains a high degree of confidence. The code for this project is publicly available at https://github.com/SriramB-98/blindspots-neurips-sub

Speculative decoding emerges as a pivotal technique for enhancing the inference speed of Large Language Models (LLMs). Despite recent research aiming to improve prediction efficiency, multi-sample speculative decoding has been overlooked due to varying numbers of accepted tokens within a batch in the verification phase. Vanilla method adds padding tokens in order to ensure that the number of new tokens remains consistent across samples. However, this increases the computational and memory access overhead, thereby reducing the speedup ratio. We propose a novel method that can resolve the issue of inconsistent tokens accepted by different samples without necessitating an increase in memory or computing overhead. Furthermore, our proposed method can handle the situation where the prediction tokens of different samples are inconsistent without the need to add padding tokens. Sufficient experiments demonstrate the efficacy of our method. Our code is available at https://github.com/niyunsheng/EMS-SD.

Speculative decoding accelerates Large Language Model (LLM) inference by verifying multiple drafted tokens in parallel. However, for Mixture-of-Experts (MoE) models, this parallelism introduces a severe bottleneck: large draft trees activate many unique experts, significantly increasing memory pressure and diminishing speedups from speculative decoding relative to autoregressive decoding. Prior methods reduce speculation depth when MoE verification becomes expensive. We propose MoE-Spec, a training-free verification-time expert budgeting method that decouples speculation depth from memory cost by enforcing a fixed expert capacity limit at each layer, loading only the experts that contribute most to verification and dropping the long tail of rarely used experts that drive bandwidth overhead. Experiments across multiple model scales and datasets show that this method yields 10--30\% higher throughput than state-of-the-art speculative decoding baselines (EAGLE-3) at comparable quality, with flexibility to trade accuracy for further latency reductions through tighter budgets.

Tool-using agents that act in the world need to be both useful and safe. Well-calibrated model confidences can be used to weigh the risk versus reward of potential actions, but prior work shows that many models are poorly calibrated. Inspired by interpretability literature exploring the internals of models, we propose a novel class of model-internal confidence estimators (MICE) to better assess confidence when calling tools. MICE first decodes from each intermediate layer of the language model using logitLens and then computes similarity scores between each layer's generation and the final output. These features are fed into a learned probabilistic classifier to assess confidence in the decoded output. On the simulated trial and error (STE) tool-calling dataset using Llama3 models, we find that MICE beats or matches the baselines on smoothed expected calibration error. Using MICE confidences to determine whether to call a tool significantly improves over strong baselines on a new metric, expected tool-calling utility. Further experiments show that MICE is sample-efficient, can generalize zero-shot to unseen APIs, and results in higher tool-calling utility in scenarios with varying risk levels. Our code is open source, available at https://github.com/microsoft/mice_for_cats.

Large Vision-Language Models (LVLMs) may produce outputs that are unfaithful to reality, also known as visual hallucinations (VH), which significantly impedes their real-world usage. To alleviate VH, various decoding strategies have been proposed to enhance visual information. However, many of these methods may require secondary decoding and rollback, which significantly reduces inference speed. In this work, we propose an efficient plug-and-play decoding algorithm via Visual-Aware Sparsification (VASparse) from the perspective of token sparsity for mitigating VH. VASparse is inspired by empirical observations: (1) the sparse activation of attention in LVLMs, and (2) visual-agnostic tokens sparsification exacerbates VH. Based on these insights, we propose a novel token sparsification strategy that balances efficiency and trustworthiness. Specifically, VASparse implements a visual-aware token selection strategy during decoding to reduce redundant tokens while preserving visual context effectively. Additionally, we innovatively introduce a sparse-based visual contrastive decoding method to recalibrate the distribution of hallucinated outputs without the time overhead associated with secondary decoding. Subsequently, VASparse recalibrates attention scores to penalize attention sinking of LVLMs towards text tokens. Extensive experiments across four popular benchmarks confirm the effectiveness of VASparse in mitigating VH across different LVLM families without requiring additional training or post-processing. Impressively, VASparse achieves state-of-the-art performance for mitigating VH while maintaining competitive decoding speed. Code is available at https://github.com/mengchuang123/VASparse-github.

Speculative decoding accelerates autoregressive generation by letting a lightweight draft model propose future tokens that a larger target model then verifies in parallel. In practice, however, draft models are usually trained on broad generic corpora, which leaves it unclear how much speculative decoding quality depends on the draft training distribution. We study this question with lightweight HASS and EAGLE-2 drafters trained on MathInstruct, ShareGPT, and mixed-data variants, evaluated on MT-Bench, GSM8K, MATH-500, and SVAMP. Measured by acceptance length, task-specific training yields clear specialization: MathInstruct-trained drafts are strongest on reasoning benchmarks, while ShareGPT-trained drafts are strongest on MT-Bench. Mixed-data training improves robustness, but larger mixtures do not dominate across decoding temperatures. We also study how to combine specialized drafters at inference time. Naive checkpoint averaging performs poorly, whereas confidence-based routing improves over single-domain drafts and merged-tree verification yields the highest acceptance length overall for both backbones. Finally, confidence is a more useful routing signal than entropy: rejected tokens tend to have higher entropy, but confidence produces much clearer benchmark-level routing decisions. These results show that speculative decoding quality depends not only on draft architecture, but also on the match between draft training data and downstream workload, and that specialized drafters are better combined at inference time than in weight space.

Mixture-of-experts (MoE) models activate few experts per token, yet batched decoding can access nearly the entire expert pool, making expert-weight traffic a major bottleneck. Expert pruning reduces this traffic, but conventional approaches also prune compute-bound prefill, sacrificing model quality for little throughput benefit. We present SlimWise, a serving framework that tailors the expert pool to each inference phase. SlimWise performs prefill with the full model and decode with a pruned model that directly reuses the prefill-generated KV cache without conversion. Across two MoE backbones and three pruning criteria, this training-free KV cache handoff substantially narrows accuracy gaps relative to the full model in many settings. We also show that benchmark accuracy can conceal substantial pruning-induced changes in generation length. To address these distortions and residual accuracy loss, SlimWise introduces a low-cost distillation stage that trains the decoder to continue from full-model KV caches while updating only a small subset of parameters. Implemented in vLLM, SlimWise supports both prefill-decode (PD) disaggregation and PD-colocated serving. On Qwen3.6-35B-A3B, SlimWise improves decode throughput by up to 1.81x at 50% expert pruning with minimal accuracy loss.

Growing demands from tasks like code generation, deep reasoning, and long-document understanding have made long-context generation a crucial capability for large language models (LLMs). Speculative decoding is one of the most direct and effective approaches for accelerating generation. It follows a draft-verify paradigm, where a lightweight draft model proposes several candidate tokens and the target model verifies them. However, we find that as the context length grows, verification becomes the dominant bottleneck. To further accelerate speculative decoding in long-context generation, we introduce SpecPV, a self-speculative decoding approach that performs fast verification using partial key-value states (KV) and periodically applies full verification to eliminate accumulated errors. We validate SpecPV across multiple long-context benchmarks and models, including LLaMA-3.1-8B-Instruct and Qwen3-series. Experimental results show that SpecPV achieves up to 6x decoding speedup over standard autoregressive decoding with minor degradation.

Activation sparsity denotes the existence of substantial weakly-contributed elements within activation outputs that can be eliminated, benefiting many important applications concerned with large language models (LLMs). Although promoting greater activation sparsity within LLMs deserves deep studies, existing works lack comprehensive and quantitative research on the correlation between activation sparsity and potentially influential factors. In this paper, we present a comprehensive study on the quantitative scaling properties and influential factors of the activation sparsity within decoder-only Transformer-based LLMs. Specifically, we propose PPL-p% sparsity, a precise and performance-aware activation sparsity metric that is applicable to any activation function. Through extensive experiments, we find several important phenomena. Firstly, different activation functions exhibit comparable performance but opposite training-time sparsity trends. The activation ratio (i.e., 1-sparsity ratio) evolves as a convergent increasing power-law and decreasing logspace power-law with the amount of training data for SiLU-activated and ReLU-activated LLMs, respectively. These demonstrate that ReLU is more efficient as the activation function than SiLU and can leverage more training data to improve activation sparsity. Secondly, the activation ratio linearly increases with the width-depth ratio below a certain bottleneck point, indicating the potential advantage of a deeper architecture at a fixed parameter scale. Finally, at similar width-depth ratios, we surprisingly find that the limit value of activation sparsity varies weakly with the parameter scale, i.e., the activation patterns within LLMs are insensitive to the parameter scale. These empirical laws towards LLMs with greater activation sparsity have important implications for making LLMs more efficient and interpretable.

Quite surprisingly, exact maximum a posteriori (MAP) decoding of neural language generators frequently leads to low-quality results. Rather, most state-of-the-art results on language generation tasks are attained using beam search despite its overwhelmingly high search error rate. This implies that the MAP objective alone does not express the properties we desire in text, which merits the question: if beam search is the answer, what was the question? We frame beam search as the exact solution to a different decoding objective in order to gain insights into why high probability under a model alone may not indicate adequacy. We find that beam search enforces uniform information density in text, a property motivated by cognitive science. We suggest a set of decoding objectives that explicitly enforce this property and find that exact decoding with these objectives alleviates the problems encountered when decoding poorly calibrated language generation models. Additionally, we analyze the text produced using various decoding strategies and see that, in our neural machine translation experiments, the extent to which this property is adhered to strongly correlates with BLEU.

Efficiency, as a critical practical challenge for LLM-driven agentic and reasoning systems, is increasingly constrained by the inherent latency of autoregressive (AR) decoding. Speculative decoding mitigates this cost through a draft-verify scheme, yet existing approaches rely on AR draft models (a.k.a., drafters), which introduce two fundamental issues: (1) step-wise uncertainty accumulation leads to a progressive collapse of trust between the target model and the drafter, and (2) inherently sequential decoding of AR drafters. Together, these factors cause limited speedups. In this paper, we show that a diffusion large language model (dLLM) drafters can naturally overcome these issues through its fundamentally different probabilistic modeling and efficient parallel decoding strategy. Building on this insight, we introduce DEER, an efficient speculative decoding framework that drafts with diffusion and verifies with AR models. To enable high-quality drafting, DEER employs a two-stage training pipeline to align the dLLM-based drafters with the target AR model, and further adopts single-step decoding to generate long draft segments. Experiments show DEER reaches draft acceptance lengths of up to 32 tokens, far surpassing the 10 tokens achieved by EAGLE-3. Moreover, on HumanEval with Qwen3-30B-A3B, DEER attains a 5.54x speedup, while EAGLE-3 achieves only 2.41x. Code, model, demo, etc, will be available at https://czc726.github.io/DEER/

Computationally intensive decoding procedures--including search, reranking, and self-critique--can improve the quality of language model (LM) outputs in problems spanning code generation, numerical reasoning, and dialog. Existing work typically applies the same decoding procedure for every input to an LM. But not all inputs require the same amount of computation to process. Can we allocate decoding computation adaptively, using more resources to answer questions whose answers will be harder to compute? We present an approach that predicts the distribution of rewards given an input and computation budget, then allocates additional computation to inputs for which it is predicted to be most useful. We apply this approach in two decoding procedures: first, an adaptive best-of-k procedure that dynamically selects the number of samples to generate as input to a reranker; second, a routing procedure that dynamically responds to a query using a decoding procedure that is expensive but accurate, or one that is cheaper but less capable. Across a suite of programming, mathematics, and dialog tasks, we show that accurate computation-allocation procedures can be learned, and reduce computation by up to 50% at no cost to response quality, or improve quality by up to 10% at a fixed computational budget.

Activation sparsity can enable practical inference speedups in large language models (LLMs) by reducing the compute and memory-movement required for matrix multiplications during the forward pass. However, existing methods face limitations that inhibit widespread adoption. Some approaches are tailored towards older models with ReLU-based sparsity, while others require extensive continued pre-training on up to hundreds of billions of tokens. This paper describes TEAL, a simple training-free method that applies magnitude-based activation sparsity to hidden states throughout the entire model. TEAL achieves 40-50% model-wide sparsity with minimal performance degradation across Llama-2, Llama-3, and Mistral families, with sizes varying from 7B to 70B. We improve existing sparse kernels and demonstrate wall-clock decoding speed-ups of up to 1.53times and 1.8times at 40% and 50% model-wide sparsity. TEAL is compatible with weight quantization, enabling further efficiency gains.

Efficient decoding to estimate error locations from outcomes of syndrome measurement is the prerequisite for quantum error correction. Decoding in presence of circuit-level noise including measurement errors should be considered in case of actual quantum computing devices. In this work, we develop a decoder for circuit-level noise that solves the error estimation problems as Ising-type optimization problems. We confirm that the threshold theorem in the surface code under the circuitlevel noise is reproduced with an error threshold of approximately 0.4%. We also demonstrate the advantage of the decoder through which the Y error detection rate can be improved compared with other matching-based decoders. Our results reveal that a lower logical error rate can be obtained using our algorithm compared with that of the minimum-weight perfect matching algorithm.

We endow Large Language Models (LLMs) with fine-grained self-evaluation to refine multi-step reasoning inference. We propose an effective prompting approach that integrates self-evaluation guidance through stochastic beam search. Our approach explores the reasoning search space using a well-calibrated automatic criterion. This enables an efficient search to produce higher-quality final predictions. With the self-evaluation guided stochastic beam search, we also balance the quality-diversity trade-off in the generation of reasoning chains. This allows our approach to adapt well with majority voting and surpass the corresponding Codex-backboned baselines by 6.34%, 9.56%, and 5.46% on the GSM8K, AQuA, and StrategyQA benchmarks, respectively, in few-shot accuracy. Analysis of our decompositional reasoning finds it pinpoints logic failures and leads to higher consistency and robustness. Our code is publicly available at https://github.com/YuxiXie/SelfEval-Guided-Decoding.

We study training-inference mismatch in reinforcement learning with verifiable rewards (RLVR) for large language models, where rollouts are sampled by an inference engine while gradients are computed by a training engine, and the two engines assign different probabilities to the same tokens. To account for this discrepancy in policy updates, we introduce calibrated importance sampling (CIS). CIS is motivated by an empirically supported logit-displacement characterization that expresses the mismatch as an additive displacement varepsilon_t in log-odds, determined by the per-logit perturbation before the softmax, whose distribution is approximately invariant to token confidence. This characterization motivates a confidence-aware truncation: large positive displacements are truncated at a single constant threshold, which maps back to an importance-ratio cap that tightens as token confidence increases. Theoretically, we show that CIS replaces the unbounded second moment that governs the error of exact importance sampling with a term bounded by a constant, at the cost of a bias controlled by the truncated excess. In evaluation across three mixture-of-experts models and five mathematical reasoning benchmarks, CIS achieves the highest five-benchmark average on all three models among the evaluated baselines. Diagnostic analyses show that CIS places less truncation bias on low-confidence tokens than truncated importance sampling, while upward clipping of small importance weights reduces held-out accuracy.

Speculative decoding accelerates autoregressive language model inference by verifying multiple draft tokens in parallel. However, the verification stage often becomes the dominant computational bottleneck, especially for long-context inputs and mixture-of-experts (MoE) models. Existing sparsification methods are designed primarily for standard token-by-token autoregressive decoding to remove substantial computational redundancy in LLMs. This work systematically adopts different sparse methods on the verification stage of the speculative decoding and identifies structured redundancy across multiple dimensions. Based on these observations, we propose a sparse verification framework that jointly sparsifies attention, FFN, and MoE components during the verification stage to reduce the dominant computation cost. The framework further incorporates an inter-draft token and inter-layer retrieval reuse strategy to further reduce redundant computation without introducing additional training. Extensive experiments across summarization, question answering, and mathematical reasoning datasets demonstrate that the proposed methods achieve favorable efficiency-accuracy trade-offs, while maintaining stable acceptance length.

Polar codes are widely used state-of-the-art codes for reliable communication that have recently been included in the 5th generation wireless standards (5G). However, there remains room for the design of polar decoders that are both efficient and reliable in the short blocklength regime. Motivated by recent successes of data-driven channel decoders, we introduce a novel CurRIculum based Sequential neural decoder for Polar codes (CRISP). We design a principled curriculum, guided by information-theoretic insights, to train CRISP and show that it outperforms the successive-cancellation (SC) decoder and attains near-optimal reliability performance on the Polar(32,16) and Polar(64,22) codes. The choice of the proposed curriculum is critical in achieving the accuracy gains of CRISP, as we show by comparing against other curricula. More notably, CRISP can be readily extended to Polarization-Adjusted-Convolutional (PAC) codes, where existing SC decoders are significantly less reliable. To the best of our knowledge, CRISP constructs the first data-driven decoder for PAC codes and attains near-optimal performance on the PAC(32,16) code.

Large language model compression has made substantial progress through pruning, quantization, and low-rank decomposition, yet a fundamental limitation persists across all existing methods: compression budgets are allocated without any representation of what individual model components functionally encode. We term this the capability-blind compression problem and argue it is a root cause of two well-documented failures -- the insensitivity of perplexity-based evaluation to reasoning capability loss, and the abrupt phase transitions in model performance recently characterized by Ma et al. (2026). We propose Capability-Guided Compression (CGC), a framework that addresses this by using Sparse Autoencoder (SAE)-derived capability density maps to allocate differential compression budgets across transformer components. Capability density is a formally defined scalar measure combining the feature breadth, activation entropy, and cross-input consistency of a component's SAE feature activation distribution. We prove theoretically that components with higher capability density exhibit lower structural redundancy and reach their individual phase transition points at lower compression ratios, providing the first pre-compression mechanism for component-level phase transition prediction. Experiments on GPT-2 Medium confirm that capability density is statistically independent of Wanda importance scores (Spearman rho = -0.054, n = 384 heads), establishing it as a genuinely novel compression signal orthogonal to all existing importance metrics. We report a negative result on PPL-based compression comparison and provide a principled diagnosis identifying GPT-2 Medium as an insufficient test bed for the full CGC hypothesis. The theoretical framework, density formalism, and orthogonality finding constitute a foundation for capability-aware compression research.

In this paper, we propose Superlinear attention, a fully trainable multi-step attention architecture that achieves subquadratic complexity for long sequences while preserving random context access (a.k.a.\ structural non-exclusion): no eligible token position is structurally excluded from being selected for attention. Superlinear attention reformulates standard causal self-attention as a multi-step search problem with N steps, yielding an overall complexity of O(L^{1+1{N}}). To illustrate the architecture, we present a baseline N=2 implementation, which is algorithmically analogous to standard jump search. In this O(L^{3/2}) instantiation, the first step performs O(L^{3/2}) span-search to select relevant spans of the sequence, and the second step applies O(L^{3/2}) span-attention (standard attention restricted to the selected spans). In an upscaled O(L^{1.54}) configuration for robustness, we achieve an average decoding throughput of 114 tokens/sec at 1M context length and 80 tokens/sec at 10M context in our implementation on a modified 30B hybrid MoE model on a single B200 GPU. With limited training, we also obtain strong performance on the NIAH (Needle In A Haystack) task up to 256K context length, demonstrating that the routed span selection is learnable end-to-end. This paper emphasizes architectural formulation, scaling analysis, and systems feasibility, and presents initial validation; comprehensive quality evaluations across diverse long-context tasks are left to future work.

We present Statistical Calibrated Activation Pruning (SCAP), a post-training activation pruning framework that (1) generalizes sparsification by input activations of Fully-Connected layers for generic and flexible application across Transformers, and (2) features a simple Mode-Centering technique to pre-calibrate activation distributions for maximizing post-training sparsity. Our results demonstrate robust Pareto efficiency compared to prior methods, translating to a 1.5x additional LLM decoding speedup against CATS at iso model quality. SCAP effectiveness is empirically verified across a wide range of models, including recent Transformer Decoders, MoE, Mamba2, Encoding Transformer, and pre-quantized models, highlighting its practicality and scalability. The code is available at: https://github.com/IntelLabs/SCAP.

Sparse models, including sparse Mixture-of-Experts (MoE) models, have emerged as an effective approach for scaling Transformer models. However, they often suffer from computational inefficiency since a significant number of parameters are unnecessarily involved in computations via multiplying values by zero or low activation values. To address this issue, we present \tool, a novel MoE designed to enhance both the efficacy and efficiency of sparse MoE models. \tool leverages small experts and a threshold-based router to enable tokens to selectively engage only essential parameters. Our extensive experiments on language modeling and machine translation tasks demonstrate that \tool can enhance model performance while decreasing the computation load at MoE layers by over 50\% without sacrificing performance. Furthermore, we present the versatility of \tool by applying it to dense models, enabling sparse computation during inference. We provide a comprehensive analysis and make our code available at https://anonymous.4open.science/r/XMoE.

Speculative decoding accelerates large language model (LLM) inference by using a small draft model to propose candidate tokens that a larger target model verifies. A critical hyperparameter in this process is the speculation length γ, which determines how many tokens the draft model proposes per step. Nearly all existing systems use a fixed γ (typically 4), yet empirical evidence suggests that the optimal value varies across task types and, crucially, depends on the compression level applied to the target model. In this paper, we present SpecKV, a lightweight adaptive controller that selects γ per speculation step using signals extracted from the draft model itself. We profile speculative decoding across 4 task categories, 4 speculation lengths, and 3 compression levels (FP16, INT8, NF4), collecting 5,112 step-level records with per-step acceptance rates, draft entropy, and draft confidence. We demonstrate that the optimal γ shifts across compression regimes and that draft model confidence and entropy are strong predictors of acceptance rate (correlation approx 0.56). SpecKV uses a small MLP trained on these signals to maximize expected tokens per speculation step, achieving a 56.0% improvement over the fixed-γ=4 baseline with only 0.34 ms overhead per decision (<0.5% of step time). The improvement is statistically significant (p < 0.001, paired bootstrap test). We release all profiling data, trained models, and notebooks as open-source artifacts.

Large vision-language models (LVLMs) demonstrate remarkable capabilities in multimodal tasks but are prone to misinterpreting visual inputs, often resulting in hallucinations and unreliable outputs. To address these challenges, we propose Dropout Decoding, a novel inference-time approach that quantifies the uncertainty of visual tokens and selectively masks uncertain tokens to improve decoding. Our method measures the uncertainty of each visual token by projecting it onto the text space and decomposing it into aleatoric and epistemic components. Specifically, we focus on epistemic uncertainty, which captures perception-related errors more effectively. Inspired by dropout regularization, we introduce uncertainty-guided token dropout, which applies the dropout principle to input visual tokens instead of model parameters, and during inference rather than training. By aggregating predictions from an ensemble of masked decoding contexts, Dropout Decoding robustly mitigates errors arising from visual token misinterpretations. Evaluations on benchmarks including CHAIR, THRONE, and MMBench demonstrate that Dropout Decoding significantly reduces object hallucinations (OH) and enhances both reliability and quality of LVLM outputs across diverse visual contexts.

Probabilistic circuits (PCs) are a tractable representation of probability distributions allowing for exact and efficient computation of likelihoods and marginals. There has been significant recent progress on improving the scale and expressiveness of PCs. However, PC training performance plateaus as model size increases. We discover that most capacity in existing large PC structures is wasted: fully-connected parameter layers are only sparsely used. We propose two operations: pruning and growing, that exploit the sparsity of PC structures. Specifically, the pruning operation removes unimportant sub-networks of the PC for model compression and comes with theoretical guarantees. The growing operation increases model capacity by increasing the size of the latent space. By alternatingly applying pruning and growing, we increase the capacity that is meaningfully used, allowing us to significantly scale up PC learning. Empirically, our learner achieves state-of-the-art likelihoods on MNIST-family image datasets and on Penn Tree Bank language data compared to other PC learners and less tractable deep generative models such as flow-based models and variational autoencoders (VAEs).

To mitigate the high inference latency stemming from autoregressive decoding in Large Language Models (LLMs), Speculative Decoding has emerged as a novel decoding paradigm for LLM inference. In each decoding step, this method first efficiently drafts several future tokens and then verifies them in parallel. Unlike autoregressive decoding, Speculative Decoding facilitates the simultaneous decoding of multiple tokens per step, thereby accelerating inference. This paper presents a comprehensive overview and analysis of this promising decoding paradigm. We begin by providing a formal definition and formulation of Speculative Decoding. Then, we organize in-depth discussions on its key facets, including current leading techniques, the challenges faced, and potential future directions in this field. We aim for this work to serve as a catalyst for further research on Speculative Decoding, ultimately contributing to more efficient LLM inference.

Diffusion Large Language Models (dLLMs) deliver strong long-context processing capability in a non-autoregressive decoding paradigm. However, the considerable computational cost of bidirectional full attention limits the inference efficiency. Although sparse attention is promising, existing methods remain ineffective. This stems from the need to estimate attention importance for tokens yet to be decoded, while the unmasked token positions are unknown during diffusion. In this paper, we present Focus-dLLM, a novel training-free attention sparsification framework tailored for accurate and efficient long-context dLLM inference. Based on the finding that token confidence strongly correlates across adjacent steps, we first design a past confidence-guided indicator to predict unmasked regions. Built upon this, we propose a sink-aware pruning strategy to accurately estimate and remove redundant attention computation, while preserving highly influential attention sinks. To further reduce overhead, this strategy reuses identified sink locations across layers, leveraging the observed cross-layer consistency. Experimental results show that our method offers more than 29times lossless speedup under 32K context length. The code is publicly available at: https://github.com/Longxmas/Focus-dLLM