Daily Papers

Safety post-training can improve the harmfulness and policy compliance of Large Language Models (LLMs), but it may also reduce general utility, a phenomenon often described as the alignment tax. We study this trade-off through the lens of continual learning: sequential alignment stages expose the model to shifted data distributions and objectives, and their gradients may interfere with directions that support previously acquired general capabilities. This view does not claim that all alignment degradation has a single cause; rather, it provides a useful first-order mechanism for mitigating one important source of capability regression. We propose Orthogonal Gradient Projection for Safety Alignment (OGPSA), a lightweight update rule that estimates a low-rank reference subspace from gradients on a small set of general-capability data and removes from each safety gradient the component lying in this subspace. The resulting update is the steepest local safety-descent direction subject to first-order preservation constraints on the reference objectives. OGPSA is compatible with standard post-training pipelines and avoids large-scale replay, although it introduces periodic reference-gradient computation. Across Supervised Fine-Tuning (SFT), Direct Preference Optimization (DPO), and sequential SFTrightarrowDPO settings, OGPSA improves the observed safety--utility trade-off over standard baselines. Under the sequential SFTrightarrowDPO pipeline, the average performance gain increases from 33.98\% to 42.74\% on Qwen2.5-7B-Instruct and from 19.74\% to 32.98\% on Llama3.1-8B-Instruct. We have open sourced our code at https://github.com/SunGL001/OGPSA.

Reward hacking arises when a model improves a proxy reward by exploiting shortcuts rather than solving the intended task. We study this failure mode through the geometry of reinforcement learning updates in language models and argue that hacking emerges when optimization drifts away from a stable low-dimensional learning trajectory. We analyze this drift through dominant singular directions of parameter updates and show that reward-hacking runs exhibit substantially larger directional change than clean runs. Motivated by this observation, we introduce trusted-direction projection, which constrains gradients to remain within a clean reference subspace. Across reward-hacking experiments on mathematical reasoning, the proposed approach delays shortcut exploitation and better preserves task performance.

Training-free in-context segmentation enables new object categories to be introduced at inference time from a single annotated reference image, eliminating the retraining and memory overhead of class-incremental learning. Recent approaches achieve this by combining vision foundation models for semantic correspondence with promptable segmentation networks like SAM. However, their performance is fundamentally limited by the quality of the cross-image similarity map; shared contextual backgrounds between the reference and query systematically elevate similarity in non-target regions, degrading prompt localization. We present REBASE, a training-free framework that explicitly suppresses these spurious contextual correspondences. Our method identifies the low-rank background feature subspace from the reference image and project the reference and query features onto its orthogonal complement in closed form, yielding cleaner semantic matching. We then generate positive point prompts using similarity-weighted farthest-point sampling, paired with a refined dense similarity prior. Without any training or parameter updates, our approach establishes a new state of the art among training-free methods on PACO-Part, FSS-1000, and cross-domain datasets such as ISIC2018, demonstrating that explicit background subspace removal is a highly effective principle for one-shot localization.

This paper investigates the generalization of Principal Component Analysis (PCA) to Riemannian manifolds. We first propose a new and general type of family of subspaces in manifolds that we call barycentric subspaces. They are implicitly defined as the locus of points which are weighted means of k+1 reference points. As this definition relies on points and not on tangent vectors, it can also be extended to geodesic spaces which are not Riemannian. For instance, in stratified spaces, it naturally allows principal subspaces that span several strata, which is impossible in previous generalizations of PCA. We show that barycentric subspaces locally define a submanifold of dimension k which generalizes geodesic subspaces.Second, we rephrase PCA in Euclidean spaces as an optimization on flags of linear subspaces (a hierarchy of properly embedded linear subspaces of increasing dimension). We show that the Euclidean PCA minimizes the Accumulated Unexplained Variances by all the subspaces of the flag (AUV). Barycentric subspaces are naturally nested, allowing the construction of hierarchically nested subspaces. Optimizing the AUV criterion to optimally approximate data points with flags of affine spans in Riemannian manifolds lead to a particularly appealing generalization of PCA on manifolds called Barycentric Subspaces Analysis (BSA).

Despite the success of multimodal contrastive learning in aligning visual and linguistic representations, a persistent geometric anomaly, the Modality Gap, remains: embeddings of distinct modalities expressing identical semantics occupy systematically offset regions. Prior approaches to bridge this gap are largely limited by oversimplified isotropic assumptions, hindering their application in large-scale scenarios. In this paper, we address these limitations by precisely characterizing the geometric shape of the modality gap and leveraging it for efficient model scaling. First, we propose the Fixed-frame Modality Gap Theory, which decomposes the modality gap within a frozen reference frame into stable biases and anisotropic residuals. Guided by this precise modeling, we introduce ReAlign, a training-free modality alignment strategy. Utilizing statistics from massive unpaired data, ReAlign aligns text representation into the image representation distribution via a three-step process comprising Anchor, Trace, and Centroid Alignment, thereby explicitly rectifying geometric misalignment. Building on ReAlign, we propose ReVision, a scalable training paradigm for Multimodal Large Language Models (MLLMs). ReVision integrates ReAlign into the pretraining stage, enabling the model to learn the distribution of visual representations from unpaired text before visual instruction tuning, without the need for large-scale, high-quality image-text pairs. Our framework demonstrates that statistically aligned unpaired data can effectively substitute for expensive image-text pairs, offering a robust path for the efficient scaling of MLLMs.

While language models remain frozen at their training state, the world evolves continuously. Knowledge editing has emerged as a key alternative to full retraining, but its deployment is bottlenecked by the erosion of core capabilities: mathematical and programmatic reasoning collapse while encyclopedic recall remains intact. We trace this asymmetric degradation to a distributional mismatch. Covariance-based editors preserve only the subspaces spanned by their reference corpus, but fail to capture the operative distribution shaped by post-training such as SFT and DPO. Static external corpora, including Wikipedia and even the original pretraining mixture, cannot recover this shifted manifold. We propose Moir, which estimates the preservation covariance C directly from the model itself by sampling from its own decoding distribution. Seeding generation with a single random vocabulary token bypasses the instruction-following templates that otherwise dominate sampled outputs, exposing the broader subspaces the model has internalized. Moir requires no external data and serves as a drop-in component for any covariance-based editor, a practical advantage given that the pre- and post-training corpora of most modern LLMs are not publicly accessible. Across OLMo-2, Llama-3.1, and Qwen-3 (7-8B), under both MEMIT and AlphaEdit and in batch and sequential regimes, Moir consistently extends preservation in the most vulnerable domains, most strikingly on Qwen3-8B after 20,000 AlphaEdit batch edits, it retains 79.9% GSM8K accuracy compared to 10.9% with the Wikipedia baseline. These results suggest that aligning the preservation distribution with the model's operative distribution is a key factor in non-destructive editing, and that the model itself may be the most accessible source of that distribution for deployed systems.

SiFo, a wireless foundation model-based framework, is proposed for low-overhead site-specific channel state information (CSI) feedback. In 3GPP NR, Type-II feedback provides an expressive codebook-based CSI representation, but it requires substantial reference-signal overhead, UE-side search, and feedback. Learning-based site-specific feedback can reduce these online costs while retaining high-quality subspace representation by exploiting deployment-dependent propagation structure. However, existing site-specific designs typically train a dedicated neural network for each new site, which limits scalability when the number of deployments is large. SiFo addresses this scalability issue by pretraining a CSI feedback model across source sites and adapting it to a target site through lightweight calibration. A small set of target-site users reports low-dimensional reference signal received power (RSRP) fingerprints, and their full-CSI-based subspace labels are stored as calibration memory. During online operation, a served user is matched to calibrated users through the same SSB probing and RSRP reporting procedure, so nearby calibration samples provide site-specific subspace guidance without updating model parameters. SiFo therefore transfers common propagation knowledge while retaining local adaptation. Numerical results across ten city scenarios demonstrate that SiFo (i) achieves higher CSI-capture efficiency than separately trained site-specific learning baselines under the same target-site labeled budget, (ii) approaches the high-overhead 3GPP NR Type-II feedback reference using only RSRP measurements collected during online SSB probing, and (iii) converts the high CSI-capture efficiency and low overhead into effective spectral efficiency improvement under limited target-site data.

Multi-subject personalized generation presents unique challenges in maintaining identity fidelity and semantic coherence when synthesizing images conditioned on multiple reference subjects. Existing methods often suffer from identity blending and attribute leakage due to inadequate modeling of how different subjects should interact within shared representation spaces. We present MOSAIC, a representation-centric framework that rethinks multi-subject generation through explicit semantic correspondence and orthogonal feature disentanglement. Our key insight is that multi-subject generation requires precise semantic alignment at the representation level - knowing exactly which regions in the generated image should attend to which parts of each reference. To enable this, we introduce SemAlign-MS, a meticulously annotated dataset providing fine-grained semantic correspondences between multiple reference subjects and target images, previously unavailable in this domain. Building on this foundation, we propose the semantic correspondence attention loss to enforce precise point-to-point semantic alignment, ensuring high consistency from each reference to its designated regions. Furthermore, we develop the multi-reference disentanglement loss to push different subjects into orthogonal attention subspaces, preventing feature interference while preserving individual identity characteristics. Extensive experiments demonstrate that MOSAIC achieves state-of-the-art performance on multiple benchmarks. Notably, while existing methods typically degrade beyond 3 subjects, MOSAIC maintains high fidelity with 4+ reference subjects, opening new possibilities for complex multi-subject synthesis applications.

Relightable portrait animation aims to animate a static reference portrait to match the head movements and expressions of a driving video while adapting to user-specified or reference lighting conditions. Existing portrait animation methods fail to achieve relightable portraits because they do not separate and manipulate intrinsic (identity and appearance) and extrinsic (pose and lighting) features. In this paper, we present a Lighting Controllable Video Diffusion model (LCVD) for high-fidelity, relightable portrait animation. We address this limitation by distinguishing these feature types through dedicated subspaces within the feature space of a pre-trained image-to-video diffusion model. Specifically, we employ the 3D mesh, pose, and lighting-rendered shading hints of the portrait to represent the extrinsic attributes, while the reference represents the intrinsic attributes. In the training phase, we employ a reference adapter to map the reference into the intrinsic feature subspace and a shading adapter to map the shading hints into the extrinsic feature subspace. By merging features from these subspaces, the model achieves nuanced control over lighting, pose, and expression in generated animations. Extensive evaluations show that LCVD outperforms state-of-the-art methods in lighting realism, image quality, and video consistency, setting a new benchmark in relightable portrait animation.

Multireference density functional theory (MR-DFT) provides a pivotal microscopic framework for the description of the ground state properties, low-lying nuclear spectra and transition properties of atomic nuclei. Conventionally, practical implementations of MR-DFT rely on empirically chosen generator coordinates, which may omit relevant collective degrees of freedom and thus fail to capture sufficient collective correlations. Here we introduce the stochastic-basis multireference density functional theory (MR-SDFT). This is an extended scheme that augments the MR-DFT toolkit by (i) generating a diverse ensemble of mean-field reference configurations via a stochastic external field and (ii) selecting a compact subspace with Projection-Selection method. The chosen reference configurations are then linearly superposed within the MR-DFT framework to yield spectroscopic observables. Applying this framework to \nuclide[20]{Ne}, \nuclide[24]{Mg} and \nuclide[28]{Si} with the covariant density functional theory (CDFT), it is demonstrated that the MR-SCDFT leads to lower ground-state energies, smaller point-proton rms radius, and a softer ground-state band compared to the conventional MR-CDFT.

Inference-time safety methods for large language models have proliferated, yet no systematic comparison exists. We evaluate five defense paradigms (no defense, static steering, CAST, AlphaSteer, probe-gated) across seven instruction-tuned models (7-31B) and five attack types (GCG, AutoDAN, DeepInception, prefilling, intent laundering). Our central finding: prompt-time activation defenses are structurally blind to prefilling attacks. AlphaSteer achieves 0% attack success on GCG, AutoDAN, and intent laundering but 50% on prefilling. We prove a corollary: any defense that gates intervention on a single layer's activation alignment with a benign reference (cone, subspace, or null-space) is blind to attacks that craft activations to lie inside that reference, whether checked at prompt time or per token. As its constructive contrapositive we introduce response-time probing: a linear probe on the model's hidden state at the first generated tokens, with AUROC 0.97-1.00 across all seven models. Combined with a halt, it cuts prefilling attack success to 0/40 on every model with 0% benign false positives, outperforming Llama Guard 3. Cross-template generalisation depends on probe depth, so we scope the claim to the canonical prefilling-template family. Composing the response-halt with AlphaSteer's null-space steering gives an orthogonal split (the halt catches prefilling, AlphaSteer catches semantic attacks), reaching defense success 0.983 on Mistral and 0.994 on Llama and dominating both components. We further show MMLU fails to capture steering's true utility cost, which appears as behavioral hedging rather than factual loss, and that diverse negative training sets cut probe false positives from 80-100% to near zero. Code, attacks, per-sample results, and the judge prompt are released.

As generated images become increasingly realistic, reliable forgery detection is essential for maintaining trust in visual information. However, existing methods primarily rely on task-specific supervision to adapt vision foundation model representations, without fully exploiting internal forensic knowledge to guide detection. To address this limitation, we propose Reserve-Guided Elicitation (RGE), a framework that treats sparse, origin-sensitive internal components in pretrained models as a forensic reserve and translates their localization into structural constraints for lightweight adaptation. Specifically, we first use the Forensic Lens (F-lens) to decompose activations across layers and token groups into independent components and globally screen them by their response differences between real and generated images, identifying reserve sites and directions. Next, we map the selected directions back to hidden-state space to construct fixed reserve subspaces and insert Forensic Reserve Adapters (FRA) only at the identified sites. Finally, with the backbone parameters, previously fitted reference classifier, and subspace bases fixed, we train only the FRA coefficient maps to generate input-dependent residual updates constrained to the corresponding subspaces, strengthening existing forensic responses. Using only 500 labeled training images and a trainable parameter budget below 0.2% of the backbone, RGE achieves competitive performance across three detection benchmarks without target-benchmark adaptation. Furthermore, RGE consistently improves over the corresponding frozen detectors across eight encoders spanning self-supervised and vision-language pretraining, eliciting a latent forensic capacity broadly shared across pretrained vision models.

Large Language Models have achieved substantial progress in reasoning capabilities. Yet in low-resource native settings, many suffer from cross-lingual collapse, reverting to English during intermediate steps that require complex logical reasoning. This presents a cold-start bottleneck for policy optimization, whereas standard fine-tuning risks catastrophic forgetting due to cross-lingual representation drift. To address these challenges, we introduce the Onramp-Sequence Cross-Distillation (OSCD), a post-training algorithm that projects high-resource reasoning trajectories into low-resource vocabulary subspaces during generative training rollouts via an integrated translator agentic loop, ensuring the stable and efficient translation of dynamically generated reference samples for fine-tuning. This is coupled with joint-embedding semantic alignment of both reference and target-language reasoning traces, thereby bridging the pairwise cross-lingual representational gaps. Comprehensive evaluations using the AIME25 and HMMT25 benchmarks demonstrate that OSCD yields up to 3.2 times overall improvements in native Southeast Asian languages for mathematical reasoning, of which the joint-embedding semantic alignment component contributes up to 6.4% improvements in linguistic debiasing over translation-only baselines.

We generalize the class vectors found in neural networks to linear subspaces (i.e.~points in the Grassmann manifold) and show that the Grassmann Class Representation (GCR) enables the simultaneous improvement in accuracy and feature transferability. In GCR, each class is a subspace and the logit is defined as the norm of the projection of a feature onto the class subspace. We integrate Riemannian SGD into deep learning frameworks such that class subspaces in a Grassmannian are jointly optimized with the rest model parameters. Compared to the vector form, the representative capability of subspaces is more powerful. We show that on ImageNet-1K, the top-1 error of ResNet50-D, ResNeXt50, Swin-T and Deit3-S are reduced by 5.6%, 4.5%, 3.0% and 3.5%, respectively. Subspaces also provide freedom for features to vary and we observed that the intra-class feature variability grows when the subspace dimension increases. Consequently, we found the quality of GCR features is better for downstream tasks. For ResNet50-D, the average linear transfer accuracy across 6 datasets improves from 77.98% to 79.70% compared to the strong baseline of vanilla softmax. For Swin-T, it improves from 81.5% to 83.4% and for Deit3, it improves from 73.8% to 81.4%. With these encouraging results, we believe that more applications could benefit from the Grassmann class representation. Code is released at https://github.com/innerlee/GCR.

It is widely agreed that reference-based super-resolution (RefSR) achieves superior results by referring to similar high quality images, compared to single image super-resolution (SISR). Intuitively, the more references, the better performance. However, previous RefSR methods have all focused on single-reference image training, while multiple reference images are often available in testing or practical applications. The root cause of such training-testing mismatch is the absence of publicly available multi-reference SR training datasets, which greatly hinders research efforts on multi-reference super-resolution. To this end, we construct a large-scale, multi-reference super-resolution dataset, named LMR. It contains 112,142 groups of 300x300 training images, which is 10x of the existing largest RefSR dataset. The image size is also much larger. More importantly, each group is equipped with 5 reference images with different similarity levels. Furthermore, we propose a new baseline method for multi-reference super-resolution: MRefSR, including a Multi-Reference Attention Module (MAM) for feature fusion of an arbitrary number of reference images, and a Spatial Aware Filtering Module (SAFM) for the fused feature selection. The proposed MRefSR achieves significant improvements over state-of-the-art approaches on both quantitative and qualitative evaluations. Our code and data would be made available soon.

Model merging aims to enable multi-task learning by integrating the capabilities of multiple models fine-tuned from the same pre-trained checkpoint into a single model. Its core challenge is inter-task interference among task-specific parameter updates. In this paper, we analyze the output shifts induced by task updates and observe that their energy is concentrated in a small number of principal directions. We call the subspace spanned by these directions the essential subspace. In contrast, most remaining directions carry little task-relevant energy, but their accumulation across multiple task updates can cause severe interference during merging. Motivated by this observation, we propose Essential Subspace Decomposition (ESD), which decomposes each task update according to the principal components of its activation shift. Based on ESD, we introduce Essential Subspace Merging (ESM), a training-free static merging method that orthogonalizes and fuses essential components into one compact multi-task model. We further extend ESM to ESM++, a training-free dynamic merging method that decomposes task-specific residuals into low-rank experts and selects the most relevant expert through prototype-based routing during forward inference. Extensive experiments across multiple task sets and model scales demonstrate that ESM and ESM++ effectively preserves task knowledge while reducing inter-task interference.

Image inpainting for completing complicated semantic environments and diverse hole patterns of corrupted images is challenging even for state-of-the-art learning-based inpainting methods trained on large-scale data. A reference image capturing the same scene of a corrupted image offers informative guidance for completing the corrupted image as it shares similar texture and structure priors to that of the holes of the corrupted image. In this work, we propose a transformer-based encoder-decoder network, named TransRef, for reference-guided image inpainting. Specifically, the guidance is conducted progressively through a reference embedding procedure, in which the referencing features are subsequently aligned and fused with the features of the corrupted image. For precise utilization of the reference features for guidance, a reference-patch alignment (Ref-PA) module is proposed to align the patch features of the reference and corrupted images and harmonize their style differences, while a reference-patch transformer (Ref-PT) module is proposed to refine the embedded reference feature. Moreover, to facilitate the research of reference-guided image restoration tasks, we construct a publicly accessible benchmark dataset containing 50K pairs of input and reference images. Both quantitative and qualitative evaluations demonstrate the efficacy of the reference information and the proposed method over the state-of-the-art methods in completing complex holes. Code and dataset can be accessed at https://github.com/Cameltr/TransRef.

In language models, what a representation encodes is determined by the geometry of its representation space: distances, not activations, carry meaning. Existing tools characterize the shape of this geometry but do not ask what that shape is organized for. We introduce Subspace PGA, a metric that tests whether a layer's distance structure aligns with the readout subspace of the unembedding matrix W_U more than with random subspaces of equal size. Across seven Pythia models (70M--6.9B) and three cross-family models, intermediate geometry is significantly organized for prediction (peak z = 9--24), but the degree is scale-dependent: small models (d leq 1024) progressively lose it at late layers during training -- even as loss keeps improving -- while large models (d geq 2048) preserve it throughout. We trace this to a capacity trade-off: a few dominant directions migrate away from W_U's readout, masking rather than destroying the predictive structure beneath, and removing them restores alignment. Neither spectral metrics nor loss curves capture this distinction. Scale thus determines not only how well a model predicts, but how its representation geometry is organized to do so.

Merging models fine-tuned from a common, extensively pre-trained large model but specialized for different tasks has been demonstrated as a cheap and scalable strategy to construct a multi-task model that performs well across diverse tasks. Recent research, exemplified by task arithmetic, highlights that this multi-task model can be derived through arithmetic operations on task vectors. Nevertheless, current merging techniques frequently resolve potential conflicts among parameters from task-specific models by evaluating individual attributes, such as the parameters' magnitude or sign, overlooking their collective impact on the overall functionality of the model. In this work, we propose the CONtinuous relaxation of disCRETE (Concrete) subspace learning method to identify a common low-dimensional subspace and utilize its shared information to track the interference problem without sacrificing much performance. Specifically, we model the problem as a bi-level optimization problem and introduce a meta-learning framework to find the Concrete subspace mask through gradient-based techniques. At the upper level, we focus on learning a shared Concrete mask to identify the subspace, while at the inner level, model merging is performed to maximize the performance of the merged model. We conduct extensive experiments on both vision domain and language domain, and the results demonstrate the effectiveness of our method. The code is available at https://github.com/tanganke/subspace_fusion

A popular way to approximate the Koopman operator's action on a finite-dimensional subspace of functions is via orthogonal projections. The quality of the projected model directly depends on the selected subspace, specifically on how close it is to being invariant under the Koopman operator. The notion of invariance proximity provides a tight upper bound on the worst-case relative prediction error of the finite-dimensional model. However, its direct calculation is computationally challenging. This paper leverages the geometric structure behind the definition of invariance proximity to provide a closed-form expression in terms of Jordan principal angles on general inner product spaces. Unveiling this connection allows us to exploit specific isomorphisms to circumvent the computational challenges associated with spaces of functions and enables the use of existing efficient numerical routines to compute invariance proximity.

We tackle the problem disentangling the latent space of an autoencoder in order to separate labelled attribute information from other characteristic information. This then allows us to change selected attributes while preserving other information. Our method, matrix subspace projection, is much simpler than previous approaches to latent space factorisation, for example not requiring multiple discriminators or a careful weighting among their loss functions. Furthermore our new model can be applied to autoencoders as a plugin, and works across diverse domains such as images or text. We demonstrate the utility of our method for attribute manipulation in autoencoders trained across varied domains, using both human evaluation and automated methods. The quality of generation of our new model (e.g. reconstruction, conditional generation) is highly competitive to a number of strong baselines.

Detecting visual anomalies in industrial inspection often requires training with only a few normal images per category. Recent few-shot methods achieve strong results employing foundation-model features, but typically rely on memory banks, auxiliary datasets, or multi-modal tuning of vision-language models. We therefore question whether such complexity is necessary given the feature representations of vision foundation models. To answer this question, we introduce SubspaceAD, a training-free method, that operates in two simple stages. First, patch-level features are extracted from a small set of normal images by a frozen DINOv2 backbone. Second, a Principal Component Analysis (PCA) model is fit to these features to estimate the low-dimensional subspace of normal variations. At inference, anomalies are detected via the reconstruction residual with respect to this subspace, producing interpretable and statistically grounded anomaly scores. Despite its simplicity, SubspaceAD achieves state-of-the-art performance across one-shot and few-shot settings without training, prompt tuning, or memory banks. In the one-shot anomaly detection setting, SubspaceAD achieves image-level and pixel-level AUROC of 97.1% and 97.5% on the MVTec-AD dataset, and 93.4% and 98.2% on the VisA dataset, respectively, surpassing prior state-of-the-art results. Code and demo are available at https://github.com/CLendering/SubspaceAD.

Mixture of Experts (MoE) models scale capacity but often suffer from representation collapse and gradient instability. We propose Dynamic Subspace Composition (DSC), a framework that approximates context-dependent weights via a state-dependent, sparse expansion of a shared basis bank. Formally, DSC models the weight update as a residual trajectory within a Star- Shaped Domain, employing a Magnitude-Gated Simplex Interpolation to ensure continuity at the identity. Unlike standard Mixture-of-LoRAs, which incurs O(M rd) parameter complexity by retrieving independent rank-r matrices, DSC constructs a compositional rank-K approximation from decoupled unit-norm basis vectors. This reduces parameter complexity to O(M d) and memory traffic to O(Kd), while Frame-Theoretic regularization and spectral constraints provide rigorous worst-case bounds on the dynamic update. The code is available at https://github. com/VladimerKhasia/DSC

Super resolution techniques can enhance the spatial resolution of remote sensing images, enabling more efficient large scale earth observation applications. While single image SR methods enhance low resolution images, they neglect valuable complementary information from auxiliary data. Reference based SR can be interpreted as an information fusion task, where historical high resolution reference images are combined with current LR observations. However, existing RefSR methods struggle with real world complexities, such as cross sensor resolution gap and significant land cover changes, often leading to under generation or over reliance on reference image. To address these challenges, we propose CRefDiff, a novel controllable reference guided diffusion model for real world remote sensing image SR. To address the under generation problem, CRefDiff leverages a powerful generative prior to produce accurate structures and textures. To mitigate over reliance on the reference, we introduce a dual branch fusion mechanism that adaptively fuse both local and global information from the reference image. Moreover, the dual branch design enables reference strength control during inference, enhancing the models interactivity and flexibility. Finally, the Better Start strategy is proposed to significantly reduce the number of denoising steps, thereby accelerating the inference process. To support further research, we introduce RealRefRSSRD, a new real world RefSR dataset for remote sensing images, consisting of HR NAIP and LR Sentinel2 image pairs with diverse land cover changes and significant temporal gaps. Extensive experiments on RealRefRSSRD show that CRefDiff achieves SOTA performance and improves downstream tasks.

Subspace representation is a fundamental technique in various fields of machine learning. Analyzing a geometrical relationship among multiple subspaces is essential for understanding subspace series' temporal and/or spatial dynamics. This paper proposes the second-order difference subspace, a higher-order extension of the first-order difference subspace between two subspaces that can analyze the geometrical difference between them. As a preliminary for that, we extend the definition of the first-order difference subspace to the more general setting that two subspaces with different dimensions have an intersection. We then define the second-order difference subspace by combining the concept of first-order difference subspace and principal component subspace (Karcher mean) between two subspaces, motivated by the second-order central difference method. We can understand that the first/second-order difference subspaces correspond to the velocity and acceleration of subspace dynamics from the viewpoint of a geodesic on a Grassmann manifold. We demonstrate the validity and naturalness of our second-order difference subspace by showing numerical results on two applications: temporal shape analysis of a 3D object and time series analysis of a biometric signal.

Recent works have shown that, when trained at scale, uni-modal 2D vision and text encoders converge to learned features that share remarkable structural properties, despite arising from different representations. However, the role of 3D encoders with respect to other modalities remains unexplored. Furthermore, existing 3D foundation models that leverage large datasets are typically trained with explicit alignment objectives with respect to frozen encoders from other representations. In this work, we investigate the possibility of a posteriori alignment of representations obtained from uni-modal 3D encoders compared to text-based feature spaces. We show that naive post-training feature alignment of uni-modal text and 3D encoders results in limited performance. We then focus on extracting subspaces of the corresponding feature spaces and discover that by projecting learned representations onto well-chosen lower-dimensional subspaces the quality of alignment becomes significantly higher, leading to improved accuracy on matching and retrieval tasks. Our analysis further sheds light on the nature of these shared subspaces, which roughly separate between semantic and geometric data representations. Overall, ours is the first work that helps to establish a baseline for post-training alignment of 3D uni-modal and text feature spaces, and helps to highlight both the shared and unique properties of 3D data compared to other representations.

Learning similarity is a key aspect in medical image analysis, particularly in recommendation systems or in uncovering the interpretation of anatomical data in images. Most existing methods learn such similarities in the embedding space over image sets using a single metric learner. Images, however, have a variety of object attributes such as color, shape, or artifacts. Encoding such attributes using a single metric learner is inadequate and may fail to generalize. Instead, multiple learners could focus on separate aspects of these attributes in subspaces of an overarching embedding. This, however, implies the number of learners to be found empirically for each new dataset. This work, Dynamic Subspace Learners, proposes to dynamically exploit multiple learners by removing the need of knowing apriori the number of learners and aggregating new subspace learners during training. Furthermore, the visual interpretability of such subspace learning is enforced by integrating an attention module into our method. This integrated attention mechanism provides a visual insight of discriminative image features that contribute to the clustering of image sets and a visual explanation of the embedding features. The benefits of our attention-based dynamic subspace learners are evaluated in the application of image clustering, image retrieval, and weakly supervised segmentation. Our method achieves competitive results with the performances of multiple learners baselines and significantly outperforms the classification network in terms of clustering and retrieval scores on three different public benchmark datasets. Moreover, our attention maps offer a proxy-labels, which improves the segmentation accuracy up to 15% in Dice scores when compared to state-of-the-art interpretation techniques.

Class-Incremental Learning (CIL) requires a learning system to continually learn new classes without forgetting. Despite the strong performance of Pre-Trained Models (PTMs) in CIL, a critical issue persists: learning new classes often results in the overwriting of old ones. Excessive modification of the network causes forgetting, while minimal adjustments lead to an inadequate fit for new classes. As a result, it is desired to figure out a way of efficient model updating without harming former knowledge. In this paper, we propose ExpAndable Subspace Ensemble (EASE) for PTM-based CIL. To enable model updating without conflict, we train a distinct lightweight adapter module for each new task, aiming to create task-specific subspaces. These adapters span a high-dimensional feature space, enabling joint decision-making across multiple subspaces. As data evolves, the expanding subspaces render the old class classifiers incompatible with new-stage spaces. Correspondingly, we design a semantic-guided prototype complement strategy that synthesizes old classes' new features without using any old class instance. Extensive experiments on seven benchmark datasets verify EASE's state-of-the-art performance. Code is available at: https://github.com/sun-hailong/CVPR24-Ease

The exploration of linear subspaces, particularly scattered subspaces, has garnered considerable attention across diverse mathematical disciplines in recent years, notably within finite geometries and coding theory. Scattered subspaces play a pivotal role in analyzing various geometric structures such as blocking sets, two-intersection sets, complete arcs, caps in affine and projective spaces over finite fields and rank metric codes. This paper introduces a new infinite family of h-subspaces, along with their associated MRD codes. Additionally, it addresses the task of determining the generalized weights of these codes. Notably, we demonstrate that these MRD codes exhibit some larger generalized weights compared to those previously identified.

Large Language Models (LLMs) rely on safety alignment to produce socially acceptable responses. This is typically achieved through instruction tuning and reinforcement learning from human feedback. However, this alignment is known to be brittle: further fine-tuning, even on benign or lightly contaminated data, can degrade safety and reintroduce harmful behaviors. A growing body of work suggests that alignment may correspond to identifiable geometric directions in weight space, forming subspaces that could, in principle, be isolated or preserved to defend against misalignment. In this work, we conduct a comprehensive empirical study of this geometric perspective. We examine whether safety-relevant behavior is concentrated in specific subspaces, whether it can be separated from general-purpose learning, and whether harmfulness arises from distinguishable patterns in internal representations. Across both parameter and activation space, our findings are consistent: subspaces that amplify safe behaviors also amplify unsafe ones, and prompts with different safety implications activate overlapping representations. We find no evidence of a subspace that selectively governs safety. These results challenge the assumption that alignment is geometrically localized. Rather than residing in distinct directions, safety appears to emerge from entangled, high-impact components of the model's broader learning dynamics. This suggests that subspace-based defenses may face fundamental limitations and underscores the need for alternative strategies to preserve alignment under continued training. We corroborate these findings through multiple experiments on five open-source LLMs. Our code is publicly available at: https://github.com/CERT-Lab/safety-subspaces.

Model merging enables the combination of multiple specialized expert models into a single model capable of performing multiple tasks. However, the benefits of merging an increasing amount of specialized experts generally lead to diminishing returns and reduced overall performance gains. In this work, we empirically and theoretically analyze this limitation, proving that for Task Arithmetic-based methods, as more experts are merged, the common information dominates the task-specific information, leading to inevitable rank collapse. To mitigate this issue, we introduce Subspace Boosting, which operates on the singular value decomposed task vector space and maintains task vector ranks. Subspace Boosting raises merging efficacy for up to 20 experts by large margins of more than 10% when evaluated on both vision and language benchmarks. Moreover, we propose employing Higher-Order Generalized Singular Value Decomposition to quantify task similarity, offering a new interpretable perspective on model merging. Code and models are available at https://github.com/ronskoro/Subspace-Boosting.

Recent unsupervised domain adaptation methods have utilized vicinal space between the source and target domains. However, the equilibrium collapse of labels, a problem where the source labels are dominant over the target labels in the predictions of vicinal instances, has never been addressed. In this paper, we propose an instance-wise minimax strategy that minimizes the entropy of high uncertainty instances in the vicinal space to tackle the stated problem. We divide the vicinal space into two subspaces through the solution of the minimax problem: contrastive space and consensus space. In the contrastive space, inter-domain discrepancy is mitigated by constraining instances to have contrastive views and labels, and the consensus space reduces the confusion between intra-domain categories. The effectiveness of our method is demonstrated on public benchmarks, including Office-31, Office-Home, and VisDA-C, achieving state-of-the-art performances. We further show that our method outperforms the current state-of-the-art methods on PACS, which indicates that our instance-wise approach works well for multi-source domain adaptation as well. Code is available at https://github.com/NaJaeMin92/CoVi.

Subspace segmentation or subspace learning is a challenging and complicated task in machine learning. This paper builds a primary frame and solid theoretical bases for the minimal subspace segmentation (MSS) of finite samples. Existence and conditional uniqueness of MSS are discussed with conditions generally satisfied in applications. Utilizing weak prior information of MSS, the minimality inspection of segments is further simplified to the prior detection of partitions. The MSS problem is then modeled as a computable optimization problem via self-expressiveness of samples. A closed form of representation matrices is first given for the self-expressiveness, and the connection of diagonal blocks is then addressed. The MSS model uses a rank restriction on the sum of segment ranks. Theoretically, it can retrieve the minimal sample subspaces that could be heavily intersected. The optimization problem is solved via a basic manifold conjugate gradient algorithm, alternative optimization and hybrid optimization, taking into account of solving both the primal MSS problem and its pseudo-dual problem. The MSS model is further modified for handling noisy data, and solved by an ADMM algorithm. The reported experiments show the strong ability of the MSS method on retrieving minimal sample subspaces that are heavily intersected.

Reference-to-video (R2V) generation is a controllable video synthesis paradigm that constrains the generation process using both text prompts and reference images, enabling applications such as personalized advertising and virtual try-on. In practice, existing R2V methods typically introduce additional high-level semantic or cross-modal features alongside the VAE latent representation of the reference image and jointly feed them into the diffusion Transformer (DiT). These auxiliary representations provide semantic guidance and act as implicit alignment signals, which can partially alleviate pixel-level information leakage in the VAE latent space. However, they may still struggle to address copy--paste artifacts and multi-subject confusion caused by modality mismatch across heterogeneous encoder features. In this paper, we propose RefAlign, a representation alignment framework that explicitly aligns DiT reference-branch features to the semantic space of a visual foundation model (VFM). The core of RefAlign is a reference alignment loss that pulls the reference features and VFM features of the same subject closer to improve identity consistency, while pushing apart the corresponding features of different subjects to enhance semantic discriminability. This simple yet effective strategy is applied only during training, incurring no inference-time overhead, and achieves a better balance between text controllability and reference fidelity. Extensive experiments on the OpenS2V-Eval benchmark demonstrate that RefAlign outperforms current state-of-the-art methods in TotalScore, validating the effectiveness of explicit reference alignment for R2V tasks.

Continual learning aims to learn multiple tasks sequentially while preserving prior knowledge, but faces the challenge of catastrophic forgetting when adapting to new tasks. Recently, approaches leveraging pre-trained models have gained increasing popularity in mitigating this issue, due to the strong generalization ability of foundation models. To adjust pre-trained models for new tasks, existing methods usually employ low-rank adaptation, which restricts parameter updates to a fixed low-rank subspace. However, constraining the optimization space inherently compromises the model's learning capacity, resulting in inferior performance. To address this limitation, we propose Continuous Subspace Optimization for Continual Learning (CoSO) to fine-tune the model in a series of subspaces rather than a single one. These sequential subspaces are dynamically determined through the singular value decomposition of the gradients. CoSO updates the model by projecting gradients onto these subspaces, ensuring memory-efficient optimization. To mitigate forgetting, the optimization subspace of each task is constrained to be orthogonal to the historical task subspace. During task learning, CoSO maintains a task-specific component that captures the critical update directions for the current task. Upon completing a task, this component is used to update the historical task subspace, laying the groundwork for subsequent learning. Extensive experiments on multiple datasets demonstrate that CoSO significantly outperforms state-of-the-art methods, especially in challenging scenarios with long task sequences.

Reference-based Image Super-Resolution (RefSR) aims to restore a low-resolution (LR) image by utilizing the semantic and texture information from an additional reference high-resolution (reference HR) image. Existing diffusion-based RefSR methods are typically built upon ControlNet, which struggles to effectively align the information between the LR image and the reference HR image. Moreover, current RefSR datasets suffer from limited resolution and poor image quality, resulting in the reference images lacking sufficient fine-grained details to support high-quality restoration. To overcome the limitations above, we propose TriFlowSR, a novel framework that explicitly achieves pattern matching between the LR image and the reference HR image. Meanwhile, we introduce Landmark-4K, the first RefSR dataset for Ultra-High-Definition (UHD) landmark scenarios. Considering the UHD scenarios with real-world degradation, in TriFlowSR, we design a Reference Matching Strategy to effectively match the LR image with the reference HR image. Experimental results show that our approach can better utilize the semantic and texture information of the reference HR image compared to previous methods. To the best of our knowledge, we propose the first diffusion-based RefSR pipeline for ultra-high definition landmark scenarios under real-world degradation. Our code and model will be available at https://github.com/nkicsl/TriFlowSR.

Vision-Language Models require efficient adaptation to continually emerging downstream tasks. While Parameter-Efficient Fine-Tuning mitigates catastrophic forgetting, assigning isolated modules per task leads to parameter explosion. Conversely, recent similarity-driven sharing mechanisms falsely equate superficial visual similarity with underlying alignment consistency. This fundamental mismatch triggers severe negative transfer between visually similar but logically distinct tasks and fails to exploit alignment reuse across visually diverse ones. We argue thatalignment sharing is fundamentally a geometric problem of overlapping optimization trajectories within shared low-rank subspaces. Grounded in this insight, we propose iGSP, a novel framework that achieves efficient adaptation via implicit gradient subspace projection. Leveraging the early convergence of MoE routers to establish the subspace basis, iGSP bifurcates the adaptation process into two phases. First, the Subspace Identification phase introduces candidate experts via basis pre-expansion, applies a novel subspace-constrained regularization to implicitly project new task gradients onto the historical subspace, and precisely prunes redundant dimensions by treating routing probabilities as gradient flow indicators, ultimately to maximize knowledge reuse. Second, the Orthogonal Subspace Fine-Tuning phase fixes this structural basis and removes the regularization to rapidly fit the task-specific residual loss. Extensive experiments on the MTIL benchmark demonstrate that iGSP achieves state-of-the-art accuracy while significantly improving training efficiency, reducing the average trainable parameters by 42.7\% compared to current SOTA methods, and decreasing the final total parameters by 86.9\% relative to counterparts. The source code is available at https://github.com/GeoX-Lab/iGSP.

We consider the problem of simultaneously clustering and learning a linear representation of data lying close to a union of low-dimensional manifolds, a fundamental task in machine learning and computer vision. When the manifolds are assumed to be linear subspaces, this reduces to the classical problem of subspace clustering, which has been studied extensively over the past two decades. Unfortunately, many real-world datasets such as natural images can not be well approximated by linear subspaces. On the other hand, numerous works have attempted to learn an appropriate transformation of the data, such that data is mapped from a union of general non-linear manifolds to a union of linear subspaces (with points from the same manifold being mapped to the same subspace). However, many existing works have limitations such as assuming knowledge of the membership of samples to clusters, requiring high sampling density, or being shown theoretically to learn trivial representations. In this paper, we propose to optimize the Maximal Coding Rate Reduction metric with respect to both the data representation and a novel doubly stochastic cluster membership, inspired by state-of-the-art subspace clustering results. We give a parameterization of such a representation and membership, allowing efficient mini-batching and one-shot initialization. Experiments on CIFAR-10, -20, -100, and TinyImageNet-200 datasets show that the proposed method is much more accurate and scalable than state-of-the-art deep clustering methods, and further learns a latent linear representation of the data.

Model merging integrates the weights of multiple task-specific models into a single multi-task model. Despite recent interest in the problem, a significant performance gap between the combined and single-task models remains. In this paper, we investigate the key characteristics of task matrices -- weight update matrices applied to a pre-trained model -- that enable effective merging. We show that alignment between singular components of task-specific and merged matrices strongly correlates with performance improvement over the pre-trained model. Based on this, we propose an isotropic merging framework that flattens the singular value spectrum of task matrices, enhances alignment, and reduces the performance gap. Additionally, we incorporate both common and task-specific subspaces to further improve alignment and performance. Our proposed approach achieves state-of-the-art performance across multiple scenarios, including various sets of tasks and model scales. This work advances the understanding of model merging dynamics, offering an effective methodology to merge models without requiring additional training. Code is available at https://github.com/danielm1405/iso-merging .

Model merging aims to integrate multiple task-specific fine-tuned models derived from a shared pre-trained checkpoint into a single multi-task model without additional training. Despite extensive research, task interference remains a major obstacle that often undermines the performance of merged models. In this paper, we propose ESM (Essential Subspace Merging) , a robust framework for effective model merging. We begin by performing Principal Component Analysis (PCA) on feature shifts induced by parameter updates. The resulting principal directions span an essential subspace that dominantly influences feature representations. Each task's parameter update matrix is projected onto its respective essential subspace for low-rank decomposition before merging. This methodology mitigates inter-task interference while preserving core task-specific functionality. Furthermore, we introduce a multi-level polarized scaling strategy that amplifies parameters containing critical knowledge and suppresses redundant ones, preventing essential knowledge from being overwhelmed during fusion. Extensive experiments across multiple task sets and model scales demonstrate that our method achieves state-of-the-art performance in multi-task model merging.

Referenceless metrics (e.g., CLIPScore) use pretrained vision--language models to assess image descriptions directly without costly ground-truth reference texts. Such methods can facilitate rapid progress, but only if they truly align with human preference judgments. In this paper, we introduce ContextRef, a benchmark for assessing referenceless metrics for such alignment. ContextRef has two components: human ratings along a variety of established quality dimensions, and ten diverse robustness checks designed to uncover fundamental weaknesses. A crucial aspect of ContextRef is that images and descriptions are presented in context, reflecting prior work showing that context is important for description quality. Using ContextRef, we assess a variety of pretrained models, scoring functions, and techniques for incorporating context. None of the methods is successful with ContextRef, but we show that careful fine-tuning yields substantial improvements. ContextRef remains a challenging benchmark though, in large part due to the challenge of context dependence.

Attention sink (AS) is a consistent pattern in transformer attention maps where certain tokens (often special tokens or positional anchors) disproportionately attract attention from other tokens. We show that in transformers, AS is not an architectural artifact, but it is the manifestation of a fundamental geometric principle: the establishment of reference frames that anchor representational spaces. We analyze several architectures and identify three distinct reference frame types, centralized, distributed, and bidirectional, that correlate with the attention sink phenomenon. We show that they emerge during the earliest stages of training as optimal solutions to the problem of establishing stable coordinate systems in high-dimensional spaces. We show the influence of architecture components, particularly position encoding implementations, on the specific type of reference frame. This perspective transforms our understanding of transformer attention mechanisms and provides insights for both architecture design and the relationship with AS.

In this paper, we propose LSRNA, a novel framework for higher-resolution (exceeding 1K) image generation using diffusion models by leveraging super-resolution directly in the latent space. Existing diffusion models struggle with scaling beyond their training resolutions, often leading to structural distortions or content repetition. Reference-based methods address the issues by upsampling a low-resolution reference to guide higher-resolution generation. However, they face significant challenges: upsampling in latent space often causes manifold deviation, which degrades output quality. On the other hand, upsampling in RGB space tends to produce overly smoothed outputs. To overcome these limitations, LSRNA combines Latent space Super-Resolution (LSR) for manifold alignment and Region-wise Noise Addition (RNA) to enhance high-frequency details. Our extensive experiments demonstrate that integrating LSRNA outperforms state-of-the-art reference-based methods across various resolutions and metrics, while showing the critical role of latent space upsampling in preserving detail and sharpness. The code is available at https://github.com/3587jjh/LSRNA.

Blind face restoration is highly ill-posed under severe degradation, where identity-critical details may be missing from the degraded input. Same-identity references reduce this ambiguity, but mismatched pose, expression, illumination, age, makeup, or local facial states can lead to overuse of reference appearance. We propose IConFace, a unified reference-aware and no-reference framework with identity--structure asymmetric conditioning. References are distilled into a norm-weighted global AdaFace identity anchor for image-only modulation, while the degraded image is reinforced as the spatial structure anchor through low-rank residuals and block-wise degraded cross-attention with two-route memory. The resulting single checkpoint exploits references when available and falls back to no-reference restoration when absent, improving identity consistency, fine-detail recovery, and degraded-only restoration quality in a unified model.

Input space reconstruction is an attractive representation learning paradigm. Despite interpretability of the reconstruction and generation, we identify a misalignment between learning by reconstruction, and learning for perception. We show that the former allocates a model's capacity towards a subspace of the data explaining the observed variance--a subspace with uninformative features for the latter. For example, the supervised TinyImagenet task with images projected onto the top subspace explaining 90\% of the pixel variance can be solved with 45\% test accuracy. Using the bottom subspace instead, accounting for only 20\% of the pixel variance, reaches 55\% test accuracy. The features for perception being learned last explains the need for long training time, e.g., with Masked Autoencoders. Learning by denoising is a popular strategy to alleviate that misalignment. We prove that while some noise strategies such as masking are indeed beneficial, others such as additive Gaussian noise are not. Yet, even in the case of masking, we find that the benefits vary as a function of the mask's shape, ratio, and the considered dataset. While tuning the noise strategy without knowledge of the perception task seems challenging, we provide first clues on how to detect if a noise strategy is never beneficial regardless of the perception task.

By interpreting the product of the Principal Component Analysis, that is the covariance matrix, as a sequence of nested subspaces naturally coming with weights according to the level of approximation they provide, we are able to embed all d--dimensional Grassmannians into a stratified space of covariance matrices. We observe that Grassmannians constitute the lowest dimensional skeleton of the stratification while it is possible to define a Riemaniann metric on the highest dimensional and dense stratum, such a metric being compatible with the global stratification. With such a Riemaniann metric at hand, it is possible to look for geodesics between two linear subspaces of different dimensions that do not go through higher dimensional linear subspaces as would euclidean geodesics. Building upon the proposed embedding of Grassmannians into the stratified space of covariance matrices, we generalize the concept of varifolds to what we call flagfolds in order to model multi-dimensional shapes.

Recent text-to-image generation models have acquired the ability of multi-reference generation and editing; the ability to inherit the appearance of subjects from multiple reference images and re-render them under new contexts. However, the existing benchmark datasets often focus on the generation with single or a few reference images, which prevents us from measuring the progress on how model performance advances or pointing out their weaknesses, under different multi-reference conditions. In addition, their task definitions are still vague, typically limited to axes such as "what to edit" or "how many references are given", and therefore fail to capture the intrinsic difficulty of multi-reference settings. To address this gap, we introduce MultiBanana, which is carefully designed to assesses the edge of model capabilities by widely covering multi-reference-specific problems at scale: (1) varying the number of references, (2) domain mismatch among references (e.g., photo vs. anime), (3) scale mismatch between reference and target scenes, (4) references containing rare concepts (e.g., a red banana), and (5) multilingual textual references for rendering. Our analysis among a variety of text-to-image models reveals their superior performances, typical failure modes, and areas for improvement. MultiBanana will be released as an open benchmark to push the boundaries and establish a standardized basis for fair comparison in multi-reference image generation. Our data and code are available at https://github.com/matsuolab/multibanana .

Low-rank optimization has emerged as a promising approach to enabling memory-efficient training of large language models (LLMs). Existing low-rank optimization methods typically project gradients onto a low-rank subspace, reducing the memory cost of storing optimizer states. A key challenge in these methods is selecting suitable subspaces to ensure an effective optimization trajectory. Most existing approaches select the dominant subspace to preserve gradient information, as this intuitively provides the best approximation. However, we find that in practice, the dominant subspace stops changing during pretraining, thereby constraining weight updates to similar subspaces. In this paper, we propose importance sampling for low-rank optimization in LLM pretraining with a provable convergence guarantee, which the dominant subspace approach does not have. Empirically, we demonstrate that our method significantly outperforms previous methods in LLM pretraining tasks.

Preserving face identity is a critical yet persistent challenge in diffusion-based image restoration. While reference faces offer a path forward, existing reference-based methods often fail to fully exploit their potential. This paper introduces a novel approach that maximizes reference face utility for improved face restoration and identity preservation. Our method makes three key contributions: 1) Composite Context, a comprehensive representation that fuses multi-level (high- and low-level) information from the reference face, offering richer guidance than prior singular representations. 2) Hard Example Identity Loss, a novel loss function that leverages the reference face to address the identity learning inefficiencies found in the existing identity loss. 3) A training-free method to adapt the model to multi-reference inputs during inference. The proposed method demonstrably restores high-quality faces and achieves state-of-the-art identity preserving restoration on benchmarks such as FFHQ-Ref and CelebA-Ref-Test, consistently outperforming previous work.

How can a robot efficiently extract a desired object from a shelf when it is fully occluded by other objects? Prior works propose geometric approaches for this problem but do not consider object semantics. Shelves in pharmacies, restaurant kitchens, and grocery stores are often organized such that semantically similar objects are placed close to one another. Can large language models (LLMs) serve as semantic knowledge sources to accelerate robotic mechanical search in semantically arranged environments? With Semantic Spatial Search on Shelves (S^4), we use LLMs to generate affinity matrices, where entries correspond to semantic likelihood of physical proximity between objects. We derive semantic spatial distributions by synthesizing semantics with learned geometric constraints. S^4 incorporates Optical Character Recognition (OCR) and semantic refinement with predictions from ViLD, an open-vocabulary object detection model. Simulation experiments suggest that semantic spatial search reduces the search time relative to pure spatial search by an average of 24% across three domains: pharmacy, kitchen, and office shelves. A manually collected dataset of 100 semantic scenes suggests that OCR and semantic refinement improve object detection accuracy by 35%. Lastly, physical experiments in a pharmacy shelf suggest 47.1% improvement over pure spatial search. Supplementary material can be found at https://sites.google.com/view/s4-rss/home.

Targeted data selection has emerged as a crucial paradigm for efficient instruction tuning, aiming to identify a small yet influential subset of training examples for a specific target task. In practice, influence is often measured through the effect of an example on parameter updates. To make selection scalable, many approaches leverage optimizer statistics (e.g., Adam states) as an axis-aligned surrogate for update geometry (i.e., diagonal precondition), implicitly treating parameters as coordinate-wise independent. We show that this assumption breaks down in parameter-efficient fine-tuning (PEFT) methods such as LoRA. In this setting, the induced optimization geometry exhibits strong cross-parameter coupling with non-trivial off-diagonal interactions, while the task-relevant update directions are confined to a low-dimensional subspace. Motivated by this mismatch, we propose GIST (Gradient Isometric Subspace Transformation), a simple yet principled alternative that replaces axis-aligned scaling with robust subspace alignment. GIST recovers a task-specific subspace from validation gradients via spectral filtering (SVD), projects training gradients into this coupled subspace, and scores examples by their alignment with target directions.Extensive experiments have demonstrated that GIST matches or outperforms the state-of-the-art baseline with only 0.29% of the storage and 25% of the computational time under the same selection budget.

In this article, we develop an asymptotic method for constructing confidence regions for the set of all linear subspaces arising from PCA, from which we derive hypothesis tests on this set. Our method is based on the geometry of Riemannian manifolds with which some sets of linear subspaces are endowed.

This paper tackles the data-driven approximation of unknown dynamical systems using Koopman-operator methods. Given a dictionary of functions, these methods approximate the projection of the action of the operator on the finite-dimensional subspace spanned by the dictionary. We propose the Tunable Symmetric Subspace Decomposition algorithm to refine the dictionary, balancing its expressiveness and accuracy. Expressiveness corresponds to the ability of the dictionary to describe the evolution of as many observables as possible and accuracy corresponds to the ability to correctly predict their evolution. Based on the observation that Koopman-invariant subspaces give rise to exact predictions, we reason that prediction accuracy is a function of the degree of invariance of the subspace generated by the dictionary and provide a data-driven measure to measure invariance proximity. The proposed algorithm iteratively prunes the initial functional space to identify a refined dictionary of functions that satisfies the desired level of accuracy while retaining as much of the original expressiveness as possible. We provide a full characterization of the algorithm properties and show that it generalizes both Extended Dynamic Mode Decomposition and Symmetric Subspace Decomposition. Simulations on planar systems show the effectiveness of the proposed methods in producing Koopman approximations of tunable accuracy that capture relevant information about the dynamical system.

Synthetic image attribution aims at identifying the generator responsible for a given AI-generated image. Training-free reference-based attribution methods are easily scalable, since newly emerging generators can be incorporated by adding source-specific references rather than retraining a task-specific classifier. Their performance depends on two coupled factors: the representation space used for comparison and the way source-specific references are constructed. However, the interaction between these two factors remains largely unexplored. In this paper, we provide a controlled analysis of this interaction using references and off-the-shelf pretrained representations. We study representations extracted from different layers of CLIP and DINOv2, along with three reference selection methods with varying semantic constraints: arbitrary, semantically aligned, and resynthesis-based references. Our results show that attribution accuracy consistently peaks at intermediate representation levels, indicating that source-discriminative cues are more accessible before strong semantic abstraction dominates. We further show that intermediate representations are not completely semantically neutral, making reference selection critical: semantically constrained references reduce query-reference mismatch and improve attribution, especially under limited reference budgets. Resynthesis is most useful in low-reference regimes, while semantically aligned references provide a better accuracy-cost trade-off when a moderate-sized reference pool is available. Our findings show that training-free reference-based attribution should be understood as the interaction between where images are compared, how the reference set is constructed, and how many references are available.

Recent image generation models can take multiple reference images as input and combine them into a new image. However, multi-reference image generation remains challenging: models may omit or duplicate subjects from the references, or produce images in which multiple subjects appear unnaturally pasted. Recent work has proposed image generation agents that combine image generation models, reasoning models, and a harness, which is an executable program that specifies how reference images are interpreted, how generation is performed, how outputs are diagnosed, and how the final image is selected. In multi-reference generation, however, references play different roles and outputs must satisfy many criteria at once, such as fidelity to each reference and the naturalness of the whole image, so many parts of the harness could be improved, from how references are processed to how outputs are diagnosed. This makes it hard to predict which changes will improve performance and by how much, and good harnesses difficult to design by hand; indeed, human-written harnesses vary widely in performance. We therefore propose AutoRef, which optimizes the harness automatically while keeping both models frozen: a coding agent iteratively rewrites the harness code. AutoRef separates the tasks whose feedback informs proposals from the tasks used to select candidates, and continues the search from a beam of the top-ranked harnesses on the selection tasks. Using this procedure, we discover AutoRef-Harness, which improves the open-weight FLUX.2 [klein] 4B from 5.72 to 7.37 on held-out four-reference tasks of the MultiBanana benchmark, matching or exceeding proprietary models including Nano Banana Pro and GPT-Image-1.5. Without re-optimization, the same harness also improves results when the generator, number of references, benchmark, evaluator, or reasoning model differs from those used in the search.

Reference resolution is an important problem, one that is essential to understand and successfully handle context of different kinds. This context includes both previous turns and context that pertains to non-conversational entities, such as entities on the user's screen or those running in the background. While LLMs have been shown to be extremely powerful for a variety of tasks, their use in reference resolution, particularly for non-conversational entities, remains underutilized. This paper demonstrates how LLMs can be used to create an extremely effective system to resolve references of various types, by showing how reference resolution can be converted into a language modeling problem, despite involving forms of entities like those on screen that are not traditionally conducive to being reduced to a text-only modality. We demonstrate large improvements over an existing system with similar functionality across different types of references, with our smallest model obtaining absolute gains of over 5% for on-screen references. We also benchmark against GPT-3.5 and GPT-4, with our smallest model achieving performance comparable to that of GPT-4, and our larger models substantially outperforming it.

Dimensionality reduction is critical for deploying dense retrieval systems at scale, yet mainstream post-hoc methods face a fundamental trade-off: principal component analysis (PCA) preserves dominant variance but underutilizes representational capacity, while whitening enforces isotropy at the cost of amplifying noise in the heavy-tailed eigenspectrum of retrieval embeddings. Intermediate spectral scaling methods unify these extremes by reweighting dimensions with a power coefficient γ, but treat γ as a fixed hyperparameter that requires task-specific tuning. We show that the optimal scaling strength γ is not a global constant: it varies systematically with target dimensionality k and is governed by the signal-to-noise ratio (SNR) of the retained subspace. Based on this insight, we propose Spectral Tempering (SpecTemp), a learning-free method that derives an adaptive γ(k) directly from the corpus eigenspectrum using local SNR analysis and knee-point normalization, requiring no labeled data or validation-based search. Extensive experiments demonstrate that Spectral Tempering consistently achieves near-oracle performance relative to grid-searched γ^*(k) while remaining fully learning-free and model-agnostic. Our code is publicly available at https://anonymous.4open.science/r/SpecTemp-0D37.

Generating images conditioned on multiple visual references is critical for real-world applications such as multi-subject composition, narrative illustration, and novel view synthesis, yet current models suffer from severe performance degradation as the number of input references grows. We identify the root cause as a fundamental data bottleneck: existing datasets are dominated by single- or few-reference pairs and lack the structured, long-context supervision needed to learn dense inter-reference dependencies. To address this, we introduce MacroData, a large-scale dataset of 400K samples, each containing up to 10 reference images, systematically organized across four complementary dimensions -- Customization, Illustration, Spatial reasoning, and Temporal dynamics -- to provide comprehensive coverage of the multi-reference generation space. Recognizing the concurrent absence of standardized evaluation protocols, we further propose MacroBench, a benchmark of 4,000 samples that assesses generative coherence across graded task dimensions and input scales. Extensive experiments show that fine-tuning on MacroData yields substantial improvements in multi-reference generation, and ablation studies further reveal synergistic benefits of cross-task co-training and effective strategies for handling long-context complexity. The dataset and benchmark will be publicly released.

Vision-Language Models like CLIP are extensively used for inter-modal tasks which involve both visual and text modalities. However, when the individual modality encoders are applied to inherently intra-modal tasks like image-to-image retrieval, their performance suffers from the intra-modal misalignment. In this paper we study intra-modal misalignment in CLIP with a focus on the role of the projectors that map pre-projection image and text embeddings into the shared embedding space. By analyzing the form of the cosine similarity applied to projected features, and its interaction with the contrastive CLIP loss, we show that there is an inter-modal operator responsible for aligning the two modalities during training, and a second, intra-modal operator that only enforces intra-modal normalization but does nothing to promote intra-modal alignment. Via spectral analysis of the inter-modal operator, we identify an approximately isotropic subspace in which the two modalities are well-aligned, as well as anisotropic directions specific to each modality. We demonstrate that this aligned subspace can be directly obtained from the projector weights and that removing the anisotropic directions improves intra-modal alignment. Our experiments on intra-modal retrieval and classification benchmarks show that our training-free method reduces intra-modal misalignment, greatly lowers latency, and outperforms existing approaches across multiple pre-trained CLIP-like models. The code is publicly available at: https://github.com/simomagi/IsoCLIP.

Modern transformers pair impressive capabilities with substantial memory and compute demands. Low-rank weight factorization reduces both while keeping the matrices dense, and thus efficient on standard hardware. Existing methods, however, choose the subspace to remove from each weight matrix with local closed-form criteria: activation energy, layer-wise reconstruction error, or a quadratic approximation of the loss. These criteria ignore how errors propagate through the network, so at high compression the errors compound with depth and performance collapses. We introduce Learnable Subspace Projections (LSP), which instead learns the subspaces to discard end-to-end. Each linear layer, or tied group of layers that read the same activations, is assigned an orthogonal projector. All projectors are optimized jointly against a global objective--the KL divergence to the dense model's output distribution or the model's original training loss--while the pretrained weights remain frozen. Projectors are initialized from a whitened SVD truncation, and ranks are allocated by the output KL each projector induces per parameter saved. After training, the projectors merge into standard low-rank factors, with each tied group sharing one factor. In attention, this also lets the model cache one narrow latent in place of full keys and values. Across LLMs (OPT-125M/1.3B, Qwen3-4B, Llama-2-7B) and ViT-B/16, LSP outperforms baselines, and its advantage widens as compression increases. At -70% compression, LSP brings Llama-2-7B to 10.9 WikiText-2 perplexity and 42.2% mean zero-shot accuracy, versus 13.3 and 36.0% for the strongest baseline. The factorized model decodes up to 1.6x faster than the dense model at small batch sizes, and aching the shared latent shrinks the combined memory of weights and KV cache by 13.5x at a 128k-token context, versus at most 6.5x for untied baseline factorizations.

Existing novel object 6D pose estimation methods typically rely on CAD models or dense reference views, which are both difficult to acquire. Using only a single reference view is more scalable, but challenging due to large pose discrepancies and limited geometric and spatial information. To address these issues, we propose a Single-Reference-based novel object 6D (SinRef-6D) pose estimation method. Our key idea is to iteratively establish point-wise alignment in the camera coordinate system based on state space models (SSMs). Specifically, iterative camera-space point-wise alignment can effectively handle large pose discrepancies, while our proposed RGB and Points SSMs can capture long-range dependencies and spatial information from a single view, offering linear complexity and superior spatial modeling capability. Once pre-trained on synthetic data, SinRef-6D can estimate the 6D pose of a novel object using only a single reference view, without requiring retraining or a CAD model. Extensive experiments on six popular datasets and real-world robotic scenes demonstrate that we achieve on-par performance with CAD-based and dense reference view-based methods, despite operating in the more challenging single reference setting. Code will be released at https://github.com/CNJianLiu/SinRef-6D.

Natural scenes provide us with rich contexts for object recognition and reference. In particular, knowing what type of scene one is looking at generates expectations about which objects will occur, and what their spatial configuration should be. Do Vision-Language Models (VLMs) learn to rely on scene contexts in a similar way, when generating references to objects? To address this question, we introduce the Common Objects Out-of-Context (COOCO) dataset and test to what extent VLMs rely on scene context to refer to objects under different degrees of scene-object congruency, and different perturbations. Our findings show that models leverage scene context adaptively, depending on both the semantic relatedness between object and scene and the level of noise. In particular, models rely more on context under high target-scene congruence or when objects are degraded. Attention analysis reveals that successful object categorisation involves increased focus on the target in mid-level layers, especially under moderate noise, suggesting that VLMs dynamically balance local and contextual information for reference generation. We make our dataset, code and models available at https://github.com/cs-nlp-uu/scenereg{https://github.com/cs-nlp-uu/scenereg}.

Visual retrieval systems face significant challenges when updating models with improved representations due to misalignment between the old and new representations. The costly and resource-intensive backfilling process involves recalculating feature vectors for images in the gallery set whenever a new model is introduced. To address this, prior research has explored backward-compatible training methods that enable direct comparisons between new and old representations without backfilling. Despite these advancements, achieving a balance between backward compatibility and the performance of independently trained models remains an open problem. In this paper, we address it by expanding the representation space with additional dimensions and learning an orthogonal transformation to achieve compatibility with old models and, at the same time, integrate new information. This transformation preserves the original feature space's geometry, ensuring that our model aligns with previous versions while also learning new data. Our Orthogonal Compatible Aligned (OCA) approach eliminates the need for re-indexing during model updates and ensures that features can be compared directly across different model updates without additional mapping functions. Experimental results on CIFAR-100 and ImageNet-1k demonstrate that our method not only maintains compatibility with previous models but also achieves state-of-the-art accuracy, outperforming several existing methods.

Feature-map knowledge distillation (KD) transfers internal representations well between comparably sized Vision Transformers (ViTs), but it often fails in compression. We revisit this failure and uncover a paradox. Sample-wise SVD shows that each image is highly compressible, which seems to suggest that a narrow student with a linear projector should match the teacher "in principle". However, a dataset-level view contradicts this intuition: PCA shows that the teacher is a union of low-rank subspaces with significant subspace rotation across inputs. We further introduce token-level Spectral Energy Patterns (SEP) and find an architecture-invariant encoding law: tokens spread energy broadly across channel modes even when they live in low-rank subspace, creating a bandwidth mismatch. We refer to this combined phenomenon as an encoding mismatch. We propose two minimal remedies, Lift or WideLast: (i) Lift retains a lightweight lifting projector at inference to provide wider channel, or (ii) WideLast widens only the student's last block, enabling an input-dependent expansion. On ImageNet-1K, these fixes revive feature KD for ViT compression, improving DeiT-Tiny distilled from CaiT-S24 from 74.86% to 77.53%/78.23% top-1 accuracy, and they also strengthen students trained without distillation. Our analyses clarify when and why feature-map KD fails and then how to fix it. Code and raw data are provided in https://github.com/thy960112/From-Per-Image-Low-Rank-to-Encoding-Mismatch.

Multi-reference image generation aims to synthesize images from textual instructions while faithfully preserving subject identities from multiple reference images. Existing VLM-enhanced diffusion models commonly rely on decoupled visual conditioning: semantic ViT features are processed by the VLM for instruction understanding, whereas appearance-rich VAE features are injected later into the diffusion backbone. Despite its intuitive design, this separation makes it difficult for the model to associate each semantically grounded subject with visual details from the correct reference image. As a result, the model may recognize which subject is being referred to, but fail to preserve its identity and fine-grained appearance, leading to attribute leakage and cross-reference confusion in complex multi-reference settings. To address this issue, we propose UniCustom, a unified visual conditioning framework that fuses ViT and VAE features before VLM encoding. This early fusion exposes the VLM to both semantic cues and appearance-rich details, enabling its hidden states to jointly encode the referred subject and corresponding visual appearance with only a lightweight linear fusion layer. To learn such unified representations, we adopt a two-stage training strategy: reconstruction-oriented pretraining that preserves reference-specific appearance details in the fused hidden states, followed by supervised finetuning on single- and multi-reference generation tasks. We further introduce a slot-wise binding regularization that encourages each image slot to preserve low-level details of its corresponding reference, thereby reducing cross-reference entanglement. Experiments on two multi-reference generation benchmarks demonstrate that UniCustom consistently improves subject consistency, instruction following, and compositional fidelity over strong baselines.

Let F be a field, and n geq r>0 be integers, with r even. Denote by A_n(F) the space of all n-by-n alternating matrices with entries in F. We consider the problem of determining the greatest possible dimension for an affine subspace of A_n(F) in which every matrix has rank equal to r (or rank at least r). Recently Rubei has solved this problem over the field of real numbers. We extend her result to all fields with large enough cardinality. Provided that n geq r+3 and |F|geq minbigl(r-1,r{2}+2bigr), we also determine the affine subspaces of rank r matrices in A_n(F) that have the greatest possible dimension, and we point to difficulties for the corresponding problem in the case nleq r+2.

Distinctive Image Captioning (DIC) -- generating distinctive captions that describe the unique details of a target image -- has received considerable attention over the last few years. A recent DIC work proposes to generate distinctive captions by comparing the target image with a set of semantic-similar reference images, i.e., reference-based DIC (Ref-DIC). It aims to make the generated captions can tell apart the target and reference images. Unfortunately, reference images used by existing Ref-DIC works are easy to distinguish: these reference images only resemble the target image at scene-level and have few common objects, such that a Ref-DIC model can trivially generate distinctive captions even without considering the reference images. To ensure Ref-DIC models really perceive the unique objects (or attributes) in target images, we first propose two new Ref-DIC benchmarks. Specifically, we design a two-stage matching mechanism, which strictly controls the similarity between the target and reference images at object-/attribute- level (vs. scene-level). Secondly, to generate distinctive captions, we develop a strong Transformer-based Ref-DIC baseline, dubbed as TransDIC. It not only extracts visual features from the target image, but also encodes the differences between objects in the target and reference images. Finally, for more trustworthy benchmarking, we propose a new evaluation metric named DisCIDEr for Ref-DIC, which evaluates both the accuracy and distinctiveness of the generated captions. Experimental results demonstrate that our TransDIC can generate distinctive captions. Besides, it outperforms several state-of-the-art models on the two new benchmarks over different metrics.

Material replacement is a common interior-design operation: changing the material of a selected surface while preserving its geometry, surroundings, and illumination. Despite its commercial relevance, no public benchmark isolates this task, and evaluating it is challenging. Reference-based metrics penalize valid outputs in this inherently one-to-many setting, favor the style of the reference generator, and cannot fairly compare editors that receive different forms of guidance. We introduce MatReplace, a reference-free benchmark that evaluates edits along four verifiable dimensions: local material correctness, global lighting harmony, outside preservation, and inside structure. It defines three tracks that vary one conditioning signal at a time: (A) instruction only, (B) instruction plus region mask, and (C) material reference image instead of instruction. Our results reveal a clear divide between naming and visually grounding materials. In Track A, leading closed-source editors achieve exemplar-level material rendering and surpass the exemplar anchor under our primary aggregate. In Track B, masks help only mask-compatible models with weak scene preservation, with task-paired, single-seed effects ranging from +0.137 to -0.090 across aligned model families. In Track C, reference-image conditioning degrades every family under both aggregates, by -0.031 to -0.508; in the worst cases, models repaint the reference image itself and perform worse than returning the input unchanged. Thus, named-material rendering is largely solved by the strongest closed editors on this distribution, but grounding materials from pixels remains an open challenge. Expert ratings validate our ranking (Kendall's tau = 0.68) and align with our aggregates more closely than GT-referenced or CLIP-based baselines.

Multi-reference image generation aims to synthesize images by integrating attributes from multiple reference images under textual instructions. As the number of references increases, the task necessitates complex semantic comprehension, such as correctly associating attributes with the intended subjects and planing out coherent spatial arrangement between subjects and their environments. Existing approaches, which rely solely on natural language instruction, often fail to capture these complex intentions precisely, leading to semantic misalignment and inconsistent generation. We identify two key factors behind these limitations: natural language instructions are often verbose and ambiguous, and high-quality multi-reference data is scarce. To address these issues, we propose StructGen, which employs a structured, dictionary-like format to encode multiple reference images, thereby enabling explicit and unambiguous specification of generation intentions. To support this design, we construct a structured dataset based on high-quality real images and develop a corresponding training framework, along with a dedicated benchmark for challenging multi-reference scenarios. Extensive experiments on both public benchmarks and our proposed benchmark demonstrate that StructGen consistently outperforms existing methods on both semantic alignment and detailed reference-generation consistency, especially under complex instructions with multiple references. The code is available at https://jianingpeng0382.github.io/StructGen/

Multi-reference-to-audio-video (MR2AV) generation aims to generate coherent audio-video content conditioned on multiple references and textual instructions. Existing benchmarks mainly focus on text-driven generation, single-reference subject preservation, or isolated audio-video alignment, leaving the emerging MR2AV setting largely unexplored. Compared with these settings, MR2AV requires models to jointly reason over multiple references while generating synchronized visual and audio content. Models must not only preserve each reference faithfully but also correctly bind and compose multiple referenced entities into coherent audio-visual events. To address this gap, we introduce MultiRef-Compass, a unified benchmark for MR2AV generation. It comprises 350 carefully curated samples constructed through a scalable and controllable asset-composition pipeline, covering multi-view subject preservation, multi-entity binding, and human-object-scene composition. To provide interpretable assessment, MultiRef-Compass defines an evaluation protocol with four dimensions: Basic Quality, Reference Consistency, Audio-Visual Consistency, and Instruction Following, using 14 sub-metrics. MultiRef-Compass integrates automatic metrics with a rejudging-enhanced MLLM-as-a-Judge framework, enabling scalable and auditable evaluation of both perceptual fidelity and reference-conditioned composition. Extensive experiments on eight representative MR2AV systems reveal substantial room for improvement across multiple evaluation dimensions, underscoring the need for a comprehensive benchmark and positioning MultiRef-Compass as a foundation for future MR2AV research.

Reference-to-video (R2V) generation aims to synthesize videos that align with a text prompt while preserving the subject identity from reference images. However, current R2V methods are hindered by the reliance on explicit reference image-video-text triplets, whose construction is highly expensive and difficult to scale. We bypass this bottleneck by introducing Saber, a scalable zero-shot framework that requires no explicit R2V data. Trained exclusively on video-text pairs, Saber employs a masked training strategy and a tailored attention-based model design to learn identity-consistent and reference-aware representations. Mask augmentation techniques are further integrated to mitigate copy-paste artifacts common in reference-to-video generation. Moreover, Saber demonstrates remarkable generalization capabilities across a varying number of references and achieves superior performance on the OpenS2V-Eval benchmark compared to methods trained with R2V data.

Converting scientific figures into executable code has gained increasing attention, yet existing methods primarily focus on reproducing the reference figure itself. A more practical setting is to plot new data while preserving the visual style of a reference figure (e.g., color scheme and typography). Prior approaches mimic the reference through pixel-level optimization and struggle to carry its style to new data. We show that the key to this task lies in the coordinate grounding and coding capabilities present in modern computer-use models. We propose FigMirror, an agentic framework that unlocks these capabilities through Grounded Measurement, which locates visual elements by coordinates and measures their properties through executable code. We further introduce PlotTwin-Bench, an expert-curated benchmark with fine-grained code and image-level style metrics. Experiments show that FigMirror consistently outperforms existing methods on reference-conditioned style transfer. All plots in this paper are generated by FigMirror, except those produced by other methods for comparison. Our code and data are available at: https://github.com/VILA-Lab/FigMirror.

Retrieval systems rely on representations learned by increasingly powerful models. However, due to the high training cost and inconsistencies in learned representations, there is significant interest in facilitating communication between representations and ensuring compatibility across independently trained neural networks. In the literature, two primary approaches are commonly used to adapt different learned representations: affine transformations, which adapt well to specific distributions but can significantly alter the original representation, and orthogonal transformations, which preserve the original structure with strict geometric constraints but limit adaptability. A key challenge is adapting the latent spaces of updated models to align with those of previous models on downstream distributions while preserving the newly learned representation spaces. In this paper, we impose a relaxed orthogonality constraint, namely λ-Orthogonality regularization, while learning an affine transformation, to obtain distribution-specific adaptation while retaining the original learned representations. Extensive experiments across various architectures and datasets validate our approach, demonstrating that it preserves the model's zero-shot performance and ensures compatibility across model updates. Code available at: https://github.com/miccunifi/lambda_orthogonality.git{https://github.com/miccunifi/lambda\_orthogonality}.

We show that in a variety of large-scale deep learning scenarios the gradient dynamically converges to a very small subspace after a short period of training. The subspace is spanned by a few top eigenvectors of the Hessian (equal to the number of classes in the dataset), and is mostly preserved over long periods of training. A simple argument then suggests that gradient descent may happen mostly in this subspace. We give an example of this effect in a solvable model of classification, and we comment on possible implications for optimization and learning.

Distributed training of foundation models via DDP is limited by interconnect bandwidth. While infrequent communication strategies reduce synchronization frequency, they remain bottlenecked by the memory and communication requirements of optimizer states. Low-rank optimizers can alleviate these constraints; however, in the local-update regime, workers lack access to the full-batch gradients required to compute low-rank projections, which degrades performance. We propose LoRDO, a principled framework unifying low-rank optimization with infrequent synchronization. We first demonstrate that, while global projections based on pseudo-gradients are theoretically superior, they permanently restrict the optimization trajectory to a low-rank subspace. To restore subspace exploration, we introduce a full-rank quasi-hyperbolic update. LoRDO achieves near-parity with low-rank DDP in language modeling and downstream tasks at model scales of 125M--720M, while reducing communication by approx 10 times. Finally, we show that LoRDO improves performance even more in very low-memory settings with small rank/batch size.

Visual Place Recognition is a task that aims to predict the place of an image (called query) based solely on its visual features. This is typically done through image retrieval, where the query is matched to the most similar images from a large database of geotagged photos, using learned global descriptors. A major challenge in this task is recognizing places seen from different viewpoints. To overcome this limitation, we propose a new method, called EigenPlaces, to train our neural network on images from different point of views, which embeds viewpoint robustness into the learned global descriptors. The underlying idea is to cluster the training data so as to explicitly present the model with different views of the same points of interest. The selection of this points of interest is done without the need for extra supervision. We then present experiments on the most comprehensive set of datasets in literature, finding that EigenPlaces is able to outperform previous state of the art on the majority of datasets, while requiring 60\% less GPU memory for training and using 50\% smaller descriptors. The code and trained models for EigenPlaces are available at {\url{https://github.com/gmberton/EigenPlaces}}, while results with any other baseline can be computed with the codebase at {\url{https://github.com/gmberton/auto_VPR}}.

When making predictions, a language model must trade off how much it relies on its context vs. its prior knowledge. Choosing how sensitive the model is to its context is a fundamental functionality, as it enables the model to excel at tasks like retrieval-augmented generation and question-answering. In this paper, we search for a knob which controls this sensitivity, determining whether language models answer from the context or their prior knowledge. To guide this search, we design a task for controllable context sensitivity. In this task, we first feed the model a context (Paris is in England) and a question (Where is Paris?); we then instruct the model to either use its prior or contextual knowledge and evaluate whether it generates the correct answer for both intents (either France or England). When fine-tuned on this task, instruction-tuned versions of Llama-3.1, Mistral-v0.3, and Gemma-2 can solve it with high accuracy (85-95%). Analyzing these high-performing models, we narrow down which layers may be important to context sensitivity using a novel linear time algorithm. Then, in each model, we identify a 1-D subspace in a single layer that encodes whether the model follows context or prior knowledge. Interestingly, while we identify this subspace in a fine-tuned model, we find that the exact same subspace serves as an effective knob in not only that model but also non-fine-tuned instruct and base models of that model family. Finally, we show a strong correlation between a model's performance and how distinctly it separates context-agreeing from context-ignoring answers in this subspace. These results suggest a single subspace facilitates how the model chooses between context and prior knowledge, hinting at a simple fundamental mechanism that controls this behavior.

We show that deep neural networks trained across diverse tasks exhibit remarkably similar low-dimensional parametric subspaces. We provide the first large-scale empirical evidence that demonstrates that neural networks systematically converge to shared spectral subspaces regardless of initialization, task, or domain. Through mode-wise spectral analysis of over 1100 models - including 500 Mistral-7B LoRAs, 500 Vision Transformers, and 50 LLaMA-8B models - we identify universal subspaces capturing majority variance in just a few principal directions. By applying spectral decomposition techniques to the weight matrices of various architectures trained on a wide range of tasks and datasets, we identify sparse, joint subspaces that are consistently exploited, within shared architectures across diverse tasks and datasets. Our findings offer new insights into the intrinsic organization of information within deep networks and raise important questions about the possibility of discovering these universal subspaces without the need for extensive data and computational resources. Furthermore, this inherent structure has significant implications for model reusability, multi-task learning, model merging, and the development of training and inference-efficient algorithms, potentially reducing the carbon footprint of large-scale neural models.

While orthogonal subspace methods try to mitigate task interference in Continual Learning (CL), they often suffer from energy diffusion across the basis, hindering knowledge compaction and exhausting capacity for future tasks. We observe that output feature drift induced by parameter updates is inherently low-rank, and theoretically prove that preserving parameters along the principal directions of this drift minimizes the output reconstruction error. Motivated by this, we propose Energy-Concentrated and Energy-Ordered Low-Rank Adaptation (E^2-LoRA). By explicitly ordering and concentrating knowledge into leading ranks, E^2-LoRA frees capacity for subsequent tasks. Furthermore, we design a dynamic rank allocation strategy to balance stability and plasticity by jointly optimizing energy retention and model plasticity. Extensive experiments across multiple benchmarks demonstrate that E^2-LoRA achieves state-of-the-art performance.

Unseen object pose estimation methods often rely on CAD models or multiple reference views, making the onboarding stage costly. To simplify reference acquisition, we aim to estimate the unseen object's pose through a single unposed RGB-D reference image. While previous works leverage reference images as pose anchors to limit the range of relative pose, our scenario presents significant challenges since the relative transformation could vary across the entire SE(3) space. Moreover, factors like occlusion, sensor noise, and extreme geometry could result in low viewpoint overlap. To address these challenges, we present a novel approach and benchmark, termed UNOPose, for unseen one-reference-based object pose estimation. Building upon a coarse-to-fine paradigm, UNOPose constructs an SE(3)-invariant reference frame to standardize object representation despite pose and size variations. To alleviate small overlap across viewpoints, we recalibrate the weight of each correspondence based on its predicted likelihood of being within the overlapping region. Evaluated on our proposed benchmark based on the BOP Challenge, UNOPose demonstrates superior performance, significantly outperforming traditional and learning-based methods in the one-reference setting and remaining competitive with CAD-model-based methods. The code and dataset are available at https://github.com/shanice-l/UNOPose.

Can we relocalize in a scene represented by a single reference image? Standard visual relocalization requires hundreds of images and scale calibration to build a scene-specific 3D map. In contrast, we propose Map-free Relocalization, i.e., using only one photo of a scene to enable instant, metric scaled relocalization. Existing datasets are not suitable to benchmark map-free relocalization, due to their focus on large scenes or their limited variability. Thus, we have constructed a new dataset of 655 small places of interest, such as sculptures, murals and fountains, collected worldwide. Each place comes with a reference image to serve as a relocalization anchor, and dozens of query images with known, metric camera poses. The dataset features changing conditions, stark viewpoint changes, high variability across places, and queries with low to no visual overlap with the reference image. We identify two viable families of existing methods to provide baseline results: relative pose regression, and feature matching combined with single-image depth prediction. While these methods show reasonable performance on some favorable scenes in our dataset, map-free relocalization proves to be a challenge that requires new, innovative solutions.

Recent advances in diffusion models have greatly improved pose-driven character animation. However, existing methods are limited to spatially aligned reference-pose pairs with matched skeletal structures. Handling reference-pose misalignment remains unsolved. To address this, we present One-to-All Animation, a unified framework for high-fidelity character animation and image pose transfer for references with arbitrary layouts. First, to handle spatially misaligned reference, we reformulate training as a self-supervised outpainting task that transforms diverse-layout reference into a unified occluded-input format. Second, to process partially visible reference, we design a reference extractor for comprehensive identity feature extraction. Further, we integrate hybrid reference fusion attention to handle varying resolutions and dynamic sequence lengths. Finally, from the perspective of generation quality, we introduce identity-robust pose control that decouples appearance from skeletal structure to mitigate pose overfitting, and a token replace strategy for coherent long-video generation. Extensive experiments show that our method outperforms existing approaches. The code and model are available at https://github.com/ssj9596/One-to-All-Animation.

While transformer models are widely believed to operate in high-dimensional hidden spaces, we show that attention outputs are confined to a surprisingly low-dimensional subspace, where about 60\% of the directions account for 99\% of the variance--a phenomenon that is induced by the attention output projection matrix and consistently observed across diverse model families and datasets. Critically, we find this low-rank structure as a fundamental cause of the prevalent dead feature problem in sparse dictionary learning, where it creates a mismatch between randomly initialized features and the intrinsic geometry of the activation space. Building on this insight, we propose a subspace-constrained training method for sparse autoencoders (SAEs), initializing feature directions into the active subspace of activations. Our approach reduces dead features from 87\% to below 1\% in Attention Output SAEs with 1M features, and can further extend to other sparse dictionary learning methods. Our findings provide both new insights into the geometry of attention and practical tools for improving sparse dictionary learning in large language models.

Reference-to-video (R2V) generation is evolving toward increasingly general and versatile reference control, giving rise to the emerging paradigm of omni R2V generation. However, existing benchmarks fall short of these emerging capabilities: their test cases cover limited reference types and compositions, and their evaluation protocols largely assess holistic reference consistency, overlooking whether reference factors are properly preserved, disentangled, and routed. Meanwhile, the high cost of constructing omni R2V training data makes suitable training resources scarce. To address these gaps, we introduce OmniVBench and the Omni-R2V Dataset for evaluating and training omni R2V models. OmniVBench expands R2V evaluation across broader reference types, fine-grained control tasks, and richer reference compositions, covering 7 task families and 18 fine-grained tasks spanning content, motion, style, structure, narrative, and multi-reference settings. We introduce factor-grounded evaluation with 12,172 case-specific checklist items, assessing whether intended reference factors are faithfully preserved, correctly disentangled and bound to their targets, and properly realized according to the instruction. We further introduce the Omni-R2V Dataset, bringing industrial-grade training resources for diverse R2V tasks to the broader research community. Drawing primarily on a large-scale corpus of professional video footage, it comprises 340K processed training samples spanning diverse reference types and multi-reference compositions. We develop task-specific pipelines for reference-target pair construction, offering a practical and scalable recipe for omni R2V data construction. Extensive evaluation of advanced open- and closed-source R2V models reveals clear performance gaps across task families and evaluation dimensions on OmniVBench, highlighting remaining limitations of current R2V models.

We present a parallel data-driven strategy to identify finite-dimensional functional spaces invariant under the Koopman operator associated to an unknown dynamical system. We build on the Symmetric Subspace Decomposition (SSD) algorithm, a centralized method that under mild conditions on data sampling provably finds the maximal Koopman-invariant subspace and all Koopman eigenfunctions in an arbitrary finite-dimensional functional space. A network of processors, each aware of a common dictionary of functions and equipped with a local set of data snapshots, repeatedly interact over a directed communication graph. Each processor receives its neighbors' estimates of the invariant dictionary and refines its estimate by applying SSD with its local data on the intersection of the subspaces spanned by its own dictionary and the neighbors' dictionaries. We identify conditions on the network topology to ensure the algorithm identifies the maximal Koopman-invariant subspace in the span of the original dictionary, characterize its time, computational, and communication complexity, and establish its robustness against communication failures.

We present a framework for evaluating data-science agents on live, continuously updated data using executable ground truth and format-agnostic factoid scoring. Consider this example query: "what were last week's audience sizes"---the reference answer changes as the underlying data changes, so static references become outdated and standard LLM-as-a-judge pipelines cannot verify responses against a fixed ground truth. Our central contribution, ground-truth-as-code, encodes each expected answer as an executable reference function that recomputes the answer directly from live data at evaluation time, ensuring the reference remains consistent with the system it describes. We combine this with a factoid-level, format-agnostic judge that decomposes both the agent's response and the computed ground truth into atomic claims and scores precision, recall, and accuracy over them, irrespective of the response format (prose, list, table, HTML, etc.). The approach is applicable to agents whose expected outputs can be expressed as executable data computations. We validate the framework through a human--LLM agreement study on an internally developed machine learning skill deployed in production, using a synthetic database constructed to reproduce production schemas and entity relationships. Relative to a natural-language ground-truth baseline, our method achieves a 29% improvement in the Matthews Correlation Coefficient (MCC)---a class-balanced measure of agreement between expert annotators and LLM-as-a-judge predictions---and a 16% reduction in token consumption per test case, while a self-directed baseline lacking explicit ground truth is anti-correlated with human judgment. Agents that perform multi-source data integration and computation over non-stationary data are routinely deployed in industry; we propose ground-truth-as-code as a practical methodology for their evaluation.

Coding agents repeatedly search, navigate, and retain context from evolving repositories, but disconnected indexes, language servers, and task-local histories force repeated discovery and obscure lifecycle costs. CodeNib builds reusable lexical, dense, and structural views per repository commit, maps outputs to repository-relative source ranges, maintains selected views across edits, and serves ranked search, symbol navigation, and bounded context through one runtime. Across 100 snapshots, we map quality-cost frontiers across the repository-context lifecycle. When outputs match an independent rebuild, graph and vector updates are 8.7times and 25.4times faster at the median. On the static-navigation subset matching normalized live-server locations (63% of 1,000 requests), the median per-request live/static latency ratio is 4.7times. Across five models, selected context policies preserve localization with 50--87% fewer trajectory tokens than paired grep/read. Together, these results support multi-view repository-context serving with explicit, operation-specific validity boundaries.

Introducing user-specified visual concepts in image editing is highly practical as these concepts convey the user's intent more precisely than text-based descriptions. We propose FreeEdit, a novel approach for achieving such reference-based image editing, which can accurately reproduce the visual concept from the reference image based on user-friendly language instructions. Our approach leverages the multi-modal instruction encoder to encode language instructions to guide the editing process. This implicit way of locating the editing area eliminates the need for manual editing masks. To enhance the reconstruction of reference details, we introduce the Decoupled Residual ReferAttention (DRRA) module. This module is designed to integrate fine-grained reference features extracted by a detail extractor into the image editing process in a residual way without interfering with the original self-attention. Given that existing datasets are unsuitable for reference-based image editing tasks, particularly due to the difficulty in constructing image triplets that include a reference image, we curate a high-quality dataset, FreeBench, using a newly developed twice-repainting scheme. FreeBench comprises the images before and after editing, detailed editing instructions, as well as a reference image that maintains the identity of the edited object, encompassing tasks such as object addition, replacement, and deletion. By conducting phased training on FreeBench followed by quality tuning, FreeEdit achieves high-quality zero-shot editing through convenient language instructions. We conduct extensive experiments to evaluate the effectiveness of FreeEdit across multiple task types, demonstrating its superiority over existing methods. The code will be available at: https://freeedit.github.io/.

Recent advances in generative super-resolution (SR) have greatly improved visual realism, yet existing evaluation and optimization frameworks remain misaligned with human perception. Full-Reference and No-Reference metrics often fail to reflect perceptual preference, either penalizing semantically plausible details due to pixel misalignment or favoring visually sharp but inconsistent artifacts. Moreover, most SR methods rely on ground-truth (GT)-dependent distribution matching, which does not necessarily correspond to human judgments. In this work, we propose RefReward-SR, a low-resolution (LR) reference-aware reward model for preference-aligned SR. Instead of relying on GT supervision or NR evaluation, RefReward-SR assesses high-resolution (HR) reconstructions conditioned on their LR inputs, treating the LR image as a semantic anchor. Leveraging the visual-linguistic priors of a Multimodal Large Language Models (MLLM), it evaluates semantic consistency and plausibility in a reasoning-aware manner. To support this paradigm, we construct RefSR-18K, the first large-scale LR-conditioned preference dataset for SR, providing pairwise rankings based on LR-HR consistency and HR naturalness. We fine-tune the MLLM with Group Relative Policy Optimization (GRPO) using LR-conditioned ranking rewards, and further integrate GRPO into SR model training with RefReward-SR as the core reward signal for preference-aligned generation. Extensive experiments show that our framework achieves substantially better alignment with human judgments, producing reconstructions that preserve semantic consistency while enhancing perceptual plausibility and visual naturalness. Code, models, and datasets will be released upon paper acceptance.

Video generation powers a vast array of downstream applications. However, while the de facto standard, i.e., latent diffusion models, typically employ heavily conditioned denoising networks, their decoders often remain unconditional. We observe that this architectural asymmetry leads to significant loss of detail and inconsistency relative to the input image. To address this, we argue that the decoder requires equal conditioning to preserve structural integrity. We introduce RefDecoder, a reference-conditioned video VAE decoder by injecting high-fidelity reference image signal directly into the decoding process via reference attention. Specifically, a lightweight image encoder maps the reference frame into the detail-rich high-dimensional tokens, which are co-processed with the denoised video latent tokens at each decoder up-sampling stage. We demonstrate consistent improvements across several distinct decoder backbones (e.g., Wan 2.1 and VideoVAE+), achieving up to +2.1dB PSNR over the unconditional baselines on the Inter4K, WebVid, and Large Motion reconstruction benchmarks. Notably, RefDecoder can be directly swapped into existing video generation systems without additional fine-tuning, and we report across-the-board improvements in subject consistency, background consistency, and overall quality scores on the VBench I2V benchmark. Beyond I2V, RefDecoder generalizes well to a wide range of visual generation tasks such as style transfer and video editing refinement.

Selecting a representative vector for a set of vectors is a very common requirement in many algorithmic tasks. Traditionally, the mean or median vector is selected. Ontology classes are sets of homogeneous instance objects that can be converted to a vector space by word vector embeddings. This study proposes a methodology to derive a representative vector for ontology classes whose instances were converted to the vector space. We start by deriving five candidate vectors which are then used to train a machine learning model that would calculate a representative vector for the class. We show that our methodology out-performs the traditional mean and median vector representations.

To perform few-shot learning, language models extract signals from a few input-label pairs, aggregate them into a learned prediction rule, and apply this rule to new inputs. How is this implemented in the forward pass of modern transformer models? To explore this question, we study a structured family of few-shot learning tasks for which the true prediction rule is to add an integer k to the input. We introduce a novel method that localizes the model's few-shot learning ability to only a few attention heads. This method and the findings generalize to four additional task families spanning arithmetic and semantic tasks. We then perform an in-depth analysis of individual heads via dimensionality reduction and decomposition of the heads' output spaces. For example, in Llama-3-8B-Instruct, we reduce the mechanism underlying these tasks to just three attention heads with six-dimensional subspaces, in which four dimensions track the units digit using trigonometric functions with periods 2, 5, and 10, while two dimensions track magnitude using low-frequency components. To deepen our understanding of this mechanism, we also derive a mathematical identity relating the ''aggregator'' and ''extractor'' subspaces of attention heads, allowing us to track the flow of information from individual examples to a final aggregated concept. Our results demonstrate how tracking low-dimensional subspaces of localized heads throughout a forward pass can provide insight into fine-grained computational structures in language models. Our code is available at https://github.com/xyVickyHu/addition-subspaces.

In many practical 6D object pose estimation scenarios, we often have access to only a single real-world RGB-D reference view per object, typically without CAD models. Existing methods largely rely on explicit 3D models or multi-view data, which limits their scalability. To address this challenging single-reference model-free setting, we propose OneViewAll, a semantic-prior-guided framework that performs pose estimation via a novel Project-and-Compare paradigm. Instead of relying on computationally expensive CAD-based rendering, our method directly aligns reference and query observations within a projection-equivariant space. OneViewAll progressively integrates hierarchical semantic priors across three levels: (1) category- and scene-level priors for efficient hypothesis initialization; (2) object-level symmetry priors for geometry completion via mirror fusion; and (3) patch-level priors for discriminative refinement. Extensive experiments demonstrate that OneViewAll achieves 92.5\% ADD-0.1 accuracy on the LINEMOD dataset using only one real reference view -- significantly outperforming the CVPR 2025 baseline One2Any (52.6\%). It also yields consistent improvements on YCB-V, Real275, and Toyota-Light while maintaining low inference latency. Our results underscore the efficacy of symmetry-aware projection in handling symmetric, texture-less, and occluded objects.

We address the problem of Embodied Reference Understanding, which involves predicting the object that a person in the scene is referring to through both pointing gesture and language. Accurately identifying the referent requires multimodal understanding: integrating textual instructions, visual pointing, and scene context. However, existing methods often struggle to effectively leverage visual clues for disambiguation. We also observe that, while the referent is often aligned with the head-to-fingertip line, it occasionally aligns more closely with the wrist-to-fingertip line. Therefore, relying on a single line assumption can be overly simplistic and may lead to suboptimal performance. To address this, we propose a dual-model framework, where one model learns from the head-to-fingertip direction and the other from the wrist-to-fingertip direction. We further introduce a Gaussian ray heatmap representation of these lines and use them as input to provide a strong supervisory signal that encourages the model to better attend to pointing cues. To combine the strengths of both models, we present the CLIP-Aware Pointing Ensemble module, which performs a hybrid ensemble based on CLIP features. Additionally, we propose an object center prediction head as an auxiliary task to further enhance referent localization. We validate our approach through extensive experiments and analysis on the benchmark YouRefIt dataset, achieving an improvement of approximately 4 mAP at the 0.25 IoU threshold.

Driven by the rapid growth of model parameters, parameter-efficient fine-tuning (PEFT) has become essential for adapting large models to diverse downstream tasks under constrained computational resources. Within this paradigm, orthogonal fine-tuning and its variants preserve semantic representations of pre-trained models, but struggle to achieve both expressiveness and efficiency in terms of parameter counts, memory, and computation. To overcome this limitation, we propose efficient Orthogonal Fine-Tuning with Principal Subspace adaptation (PSOFT), which confines orthogonal transformations to the principal subspace of pre-trained weights. Specifically, PSOFT constructs this subspace via matrix decomposition to enable compatible transformations with higher effective rank, establishes a theoretical condition that strictly maintains the geometry of this subspace for essential semantic preservation, and introduces efficient tunable vectors that gradually relax orthogonality during training to enhance adaptability. Extensive experiments on 35 NLP and CV tasks across four representative models demonstrate that PSOFT offers a practical and scalable solution to simultaneously achieve semantic preservation, expressiveness, and multi-dimensional efficiency in PEFT. The code is publicly available at https://github.com/fei407/PSOFT.

Image captioning has conventionally relied on reference-based automatic evaluations, where machine captions are compared against captions written by humans. This is in contrast to the reference-free manner in which humans assess caption quality. In this paper, we report the surprising empirical finding that CLIP (Radford et al., 2021), a cross-modal model pretrained on 400M image+caption pairs from the web, can be used for robust automatic evaluation of image captioning without the need for references. Experiments spanning several corpora demonstrate that our new reference-free metric, CLIPScore, achieves the highest correlation with human judgements, outperforming existing reference-based metrics like CIDEr and SPICE. Information gain experiments demonstrate that CLIPScore, with its tight focus on image-text compatibility, is complementary to existing reference-based metrics that emphasize text-text similarities. Thus, we also present a reference-augmented version, RefCLIPScore, which achieves even higher correlation. Beyond literal description tasks, several case studies reveal domains where CLIPScore performs well (clip-art images, alt-text rating), but also where it is relatively weaker in comparison to reference-based metrics, e.g., news captions that require richer contextual knowledge.

Model customization necessitates high-quality and diverse datasets, but acquiring such data remains time-consuming and labor-intensive. Despite the great potential of large language models (LLMs) for data synthesis, current approaches are constrained by limited seed data, model biases, and low-variation prompts, resulting in limited diversity and biased distributions with the increase of data scales. To tackle this challenge, we introduce TREESYNTH, a tree-guided subspace-based data synthesis approach inspired by decision trees. It constructs a spatial partitioning tree to recursively divide a task-specific full data space (i.e., root node) into numerous atomic subspaces (i.e., leaf nodes) with mutually exclusive and exhaustive attributes to ensure both distinctiveness and comprehensiveness before synthesizing samples within each atomic subspace. This globally dividing-and-synthesizing method finally collects subspace samples into a comprehensive dataset, effectively circumventing repetition and space collapse to ensure the diversity of large-scale data synthesis. Furthermore, the spatial partitioning tree enables sample allocation into atomic subspaces, allowing the rebalancing of existing datasets for more balanced and comprehensive distributions. Empirically, extensive experiments across diverse benchmarks consistently demonstrate the superior data diversity, model performance, and robust scalability of TREESYNTH compared to both human-crafted datasets and peer data synthesis methods, with an average performance gain reaching 10%. Besides, the consistent improvements of TREESYNTH-balanced datasets highlight its efficacious application to redistribute existing datasets for more comprehensive coverage and the induced performance enhancement. The code is available at https://github.com/cpa2001/TreeSynth.

Domain Generalization (DG) aims to learn representations that remain robust under out-of-distribution (OOD) shifts and generalize effectively to unseen target domains. While recent invariant learning strategies and architectural advances have achieved strong performance, explicitly discovering a structured domain-invariant subspace through second-order statistics remains underexplored. In this work, we propose CPCANet, a novel framework grounded in Common Principal Component Analysis (CPCA), which unrolls the iterative Flury-Gautschi (FG) algorithm into fully differentiable neural layers. This approach integrates the statistical properties of CPCA into an end-to-end trainable framework, enforcing the discovery of a shared subspace across diverse domains while preserving interpretability. Experiments on four standard DG benchmarks demonstrate that CPCANet achieves state-of-the-art (SOTA) performance in zero-shot transfer. Moreover, CPCANet is architecture-agnostic and requires no dataset-specific tuning, providing a simple and efficient approach to learning robust representations under distribution shift. Code is available at https://github.com/wish44165/CPCANet.

Vision-language dataset distillation (VLDD) compresses a large image-text paired dataset into a small set of synthetic pairs that can efficiently train contrastive vision-language models under strict data and compute budgets. Most existing methods match expert trajectories or cross-modal statistics, yet still enforce full-dimensional alignment in a Euclidean embedding space. This is often overly restrictive due to rank-deficient image--text correlation, with shared semantics concentrated in a low-dimensional range and remaining variation spread across a weakly correlated residual subspace. LoRS relaxes alignment at the similarity level by low-rank factorization, but does not explicitly control dominant alignment capacity and structure in the representation space. We thus propose a rank-aware hyperbolic alignment (RAHA) that combines hierarchical geometry with explicit alignment-capacity control. RAHA lifts multimodal representations to hyperbolic space and optimizes distilled pairs with asymmetric objectives that enforce geodesic alignment in the shared range while regularizing the residual subspace to preserve modality-private diversity and improve transfer robustness. Experiments on benchmarks show that RAHA demonstrates competitive cross-modal retrieval and improved transfer indicators under fixed budgets.

Recent advances in large language models (LLMs) have intensified the need to understand and reliably curb their harmful behaviours. We introduce a multidimensional framework for probing and steering harmful content in model internals. For each of 55 distinct harmfulness subconcepts (e.g., racial hate, employment scams, weapons), we learn a linear probe, yielding 55 interpretable directions in activation space. Collectively, these directions span a harmfulness subspace that we show is strikingly low-rank. We then test ablation of the entire subspace from model internals, as well as steering and ablation in the subspace's dominant direction. We find that dominant direction steering allows for near elimination of harmfulness with a low decrease in utility. Our findings advance the emerging view that concept subspaces provide a scalable lens on LLM behaviour and offer practical tools for the community to audit and harden future generations of language models.

Some security-development settings require local models that map an objective to an ordered, checkable plan. We present a low-rank decomposition adapter and release a case-disjoint corpus with 24 authored decompositions and 83 derived next-step examples across 24 satellite-security cases. To prevent reference-plan leakage, prompts contain one objective and eight shuffled SPARTA candidates. The evaluation candidate sets are constructed with oracle inclusion of every reference technique, so this study measures selection from a controlled set, not retrieval. On six fixed cases and five decoding seeds, mean scores vary across adapters and prompted Qwen2.5 baselines; a separate greedy check over three adapter training seeds shows non-negligible training variance. A 24-fold greedy leave-one-case-out control at the two compact sizes likewise shows tradeoffs: at 1.5B, adapter precision is 0.583 against 0.480 for two-shot prompting, while recall is 0.586 against 0.660. Case-resampling intervals for adapter precision relative to the strongest prompted baseline cross zero at 1.5B and 7B. The adapter is also substantially more format-compliant, which prevents attributing all score differences to selection. Autoregressive next-step accuracy is 0.08, 0.06, and 0.29 at 0.5B, 1.5B, and 7B. We therefore offer the formulation, leakage-controlled dataset, reproducibility package, and descriptive analysis as a proof of concept, not evidence of a reliable stand-alone decomposition system or a general adapter advantage. A separate diagnostic tests contract reuse.

Reference Expression Segmentation (RES) aims to segment image regions specified by referring expressions and has become popular with the rise of multimodal large models (MLLMs). While MLLMs excel in semantic understanding, their token-generation paradigm struggles with pixel-level dense prediction. Existing RES methods either couple MLLMs with the parameter-heavy Segment Anything Model (SAM) with 632M network parameters or adopt SAM-free lightweight pipelines that sacrifice accuracy. To address the trade-off between performance and cost, we specifically propose MLLMSeg, a novel framework that fully exploits the inherent visual detail features encoded in the MLLM vision encoder without introducing an extra visual encoder. Besides, we propose a detail-enhanced and semantic-consistent feature fusion module (DSFF) that fully integrates the detail-related visual feature with the semantic-related feature output by the large language model (LLM) of MLLM. Finally, we establish a light-weight mask decoder with only 34M network parameters that optimally leverages detailed spatial features from the visual encoder and semantic features from the LLM to achieve precise mask prediction. Extensive experiments demonstrate that our method generally surpasses both SAM-based and SAM-free competitors, striking a better balance between performance and cost. Code is available at https://github.com/jcwang0602/MLLMSeg.

Growing amount and quality of AI-generated texts makes detecting such content more difficult. In most real-world scenarios, the domain (style and topic) of generated data and the generator model are not known in advance. In this work, we focus on the robustness of classifier-based detectors of AI-generated text, namely their ability to transfer to unseen generators or semantic domains. We investigate the geometry of the embedding space of Transformer-based text encoders and show that clearing out harmful linear subspaces helps to train a robust classifier, ignoring domain-specific spurious features. We investigate several subspace decomposition and feature selection strategies and achieve significant improvements over state of the art methods in cross-domain and cross-generator transfer. Our best approaches for head-wise and coordinate-based subspace removal increase the mean out-of-distribution (OOD) classification score by up to 9% and 14% in particular setups for RoBERTa and BERT embeddings respectively. We release our code and data: https://github.com/SilverSolver/RobustATD

The capability of the self-attention mechanism to model the long-range dependencies has catapulted its deployment in vision models. Unlike convolution operators, self-attention offers infinite receptive field and enables compute-efficient modeling of global dependencies. However, the existing state-of-the-art attention mechanisms incur high compute and/or parameter overheads, and hence unfit for compact convolutional neural networks (CNNs). In this work, we propose a simple yet effective "Ultra-Lightweight Subspace Attention Mechanism" (ULSAM), which infers different attention maps for each feature map subspace. We argue that leaning separate attention maps for each feature subspace enables multi-scale and multi-frequency feature representation, which is more desirable for fine-grained image classification. Our method of subspace attention is orthogonal and complementary to the existing state-of-the-arts attention mechanisms used in vision models. ULSAM is end-to-end trainable and can be deployed as a plug-and-play module in the pre-existing compact CNNs. Notably, our work is the first attempt that uses a subspace attention mechanism to increase the efficiency of compact CNNs. To show the efficacy of ULSAM, we perform experiments with MobileNet-V1 and MobileNet-V2 as backbone architectures on ImageNet-1K and three fine-grained image classification datasets. We achieve approx13% and approx25% reduction in both the FLOPs and parameter counts of MobileNet-V2 with a 0.27% and more than 1% improvement in top-1 accuracy on the ImageNet-1K and fine-grained image classification datasets (respectively). Code and trained models are available at https://github.com/Nandan91/ULSAM.

The rapid growth of large models has raised concerns about their environmental impact and equity in accessibility due to significant computational costs. Low-Rank Adapters (LoRA) offer a lightweight solution for finetuning large models, resulting in an abundance of publicly available adapters tailored to diverse domains. We ask: Can these pretrained adapters be leveraged to further streamline adaptation to new tasks while addressing these challenges? We introduce EigenLoRAx, a parameter-efficient finetuning method that recycles existing adapters to create a principal subspace aligned with their shared domain knowledge which can be further augmented with orthogonal basis vectors in low-resource scenarios. This enables rapid adaptation to new tasks by learning only lightweight coefficients on the principal components of the subspace - eliminating the need to finetune entire adapters. EigenLoRAx requires significantly fewer parameters and memory, improving efficiency for both training and inference. Our method demonstrates strong performance across diverse domains and tasks, offering a scalable for edge-based applications, personalization, and equitable deployment of large models in resource-constrained environments.

The objective of text-to-image (T2I) personalization is to customize a diffusion model to a user-provided reference concept, generating diverse images of the concept aligned with the target prompts. Conventional methods representing the reference concepts using unique text embeddings often fail to accurately mimic the appearance of the reference. To address this, one solution may be explicitly conditioning the reference images into the target denoising process, known as key-value replacement. However, prior works are constrained to local editing since they disrupt the structure path of the pre-trained T2I model. To overcome this, we propose a novel plug-in method, called DreamMatcher, which reformulates T2I personalization as semantic matching. Specifically, DreamMatcher replaces the target values with reference values aligned by semantic matching, while leaving the structure path unchanged to preserve the versatile capability of pre-trained T2I models for generating diverse structures. We also introduce a semantic-consistent masking strategy to isolate the personalized concept from irrelevant regions introduced by the target prompts. Compatible with existing T2I models, DreamMatcher shows significant improvements in complex scenarios. Intensive analyses demonstrate the effectiveness of our approach.

Spatial intelligence is crucial for vision--language models (VLMs) in the physical world, yet many benchmarks evaluate largely unconstrained scenes where models can exploit 2D shortcuts. We introduce SSI-Bench, a VQA benchmark for spatial reasoning on constrained manifolds, built from complex real-world 3D structures whose feasible configurations are tightly governed by geometric, topological, and physical constraints. SSI-Bench contains 1,000 ranking questions spanning geometric and topological reasoning and requiring a diverse repertoire of compositional spatial operations, such as mental rotation, cross-sectional inference, occlusion reasoning, and force-path reasoning. It is created via a fully human-centered pipeline: ten researchers spent over 400 hours curating images, annotating structural components, and designing questions to minimize pixel-level cues. Evaluating 31 widely used VLMs reveals a large gap to humans: the best open-source model achieves 22.2% accuracy and the strongest closed-source model reaches 33.6%, while humans score 91.6%. Encouraging models to think yields only marginal gains, and error analysis points to failures in structural grounding and constraint-consistent 3D reasoning. Project page: https://ssi-bench.github.io.

Referring Remote Sensing Image Segmentation provides a flexible and fine-grained framework for remote sensing scene analysis via vision-language collaborative interpretation. Current approaches predominantly utilize a three-stage pipeline encompassing dual-modal encoding, cross-modal interaction, and pixel decoding. These methods demonstrate significant limitations in managing complex semantic relationships and achieving precise cross-modal alignment, largely due to their coupled processing mechanism that conflates target localization with boundary delineation. This architectural coupling amplifies error propagation under semantic ambiguity while restricting model generalizability and interpretability. To address these issues, we propose RSRefSeg 2, a decoupling paradigm that reformulates the conventional workflow into a collaborative dual-stage framework: coarse localization followed by fine segmentation. RSRefSeg 2 integrates CLIP's cross-modal alignment strength with SAM's segmentation generalizability through strategic foundation model collaboration. Specifically, CLIP is employed as the dual-modal encoder to activate target features within its pre-aligned semantic space and generate localization prompts. To mitigate CLIP's misactivation challenges in multi-entity scenarios described by referring texts, a cascaded second-order prompter is devised, which enhances precision through implicit reasoning via decomposition of text embeddings into complementary semantic subspaces. These optimized semantic prompts subsequently direct the SAM to generate pixel-level refined masks, thereby completing the semantic transmission pipeline. Extensive experiments (RefSegRS, RRSIS-D, and RISBench) demonstrate that RSRefSeg 2 surpasses contemporary methods in segmentation accuracy (+~3% gIoU) and complex semantic interpretation. Code is available at: https://github.com/KyanChen/RSRefSeg2.

We present Manify, an open-source Python library for non-Euclidean representation learning. Leveraging manifold learning techniques, Manify provides tools for learning embeddings in (products of) non-Euclidean spaces, performing classification and regression with data that lives in such spaces, and estimating the curvature of a manifold. Manify aims to advance research and applications in machine learning by offering a comprehensive suite of tools for manifold-based data analysis. Our source code, examples, datasets, results, and documentation are available at https://github.com/pchlenski/manify

Image captioning is conventionally formulated as the task of generating captions for images that match the distribution of reference image-caption pairs. However, reference captions in standard captioning datasets are short and may not uniquely identify the images they describe. These problems are further exacerbated when models are trained directly on image-alt text pairs collected from the internet. In this work, we show that it is possible to generate more specific captions with minimal changes to the training process. We implement classifier-free guidance for an autoregressive captioning model by fine-tuning it to estimate both conditional and unconditional distributions over captions. The guidance scale applied at decoding controls a trade-off between maximizing p(caption|image) and p(image|caption). Compared to standard greedy decoding, decoding with a guidance scale of 2 substantially improves reference-free metrics such as CLIPScore (0.808 vs. 0.775) and captiontoimage retrieval performance in the CLIP embedding space (recall@1 44.6% vs. 26.5%), but worsens standard reference-based captioning metrics (e.g., CIDEr 78.6 vs 126.1). We further explore the use of language models to guide the decoding process, obtaining small improvements over the Pareto frontier of reference-free vs. reference-based captioning metrics that arises from classifier-free guidance, and substantially improving the quality of captions generated from a model trained only on minimally curated web data.

Reference-based sketch colorization methods have garnered significant attention due to their potential applications in the animation production industry. However, most existing methods are trained with image triplets of sketch, reference, and ground truth that are semantically and spatially well-aligned, while real-world references and sketches often exhibit substantial misalignment. This mismatch in data distribution between training and inference leads to overfitting, consequently resulting in spatial artifacts and significant degradation in overall colorization quality, limiting potential applications of current methods for general purposes. To address this limitation, we conduct an in-depth analysis of the carrier, defined as the latent representation facilitating information transfer from reference to sketch. Based on this analysis, we propose a novel workflow that dynamically adapts the carrier to optimize distinct aspects of colorization. Specifically, for spatially misaligned artifacts, we introduce a split cross-attention mechanism with spatial masks, enabling region-specific reference injection within the diffusion process. To mitigate semantic neglect of sketches, we employ dedicated background and style encoders to transfer detailed reference information in the latent feature space, achieving enhanced spatial control and richer detail synthesis. Furthermore, we propose character-mask merging and background bleaching as preprocessing steps to improve foreground-background integration and background generation. Extensive qualitative and quantitative evaluations, including a user study, demonstrate the superior performance of our proposed method compared to existing approaches. An ablation study further validates the efficacy of each proposed component.

Training a referring expression comprehension (ReC) model for a new visual domain requires collecting referring expressions, and potentially corresponding bounding boxes, for images in the domain. While large-scale pre-trained models are useful for image classification across domains, it remains unclear if they can be applied in a zero-shot manner to more complex tasks like ReC. We present ReCLIP, a simple but strong zero-shot baseline that repurposes CLIP, a state-of-the-art large-scale model, for ReC. Motivated by the close connection between ReC and CLIP's contrastive pre-training objective, the first component of ReCLIP is a region-scoring method that isolates object proposals via cropping and blurring, and passes them to CLIP. However, through controlled experiments on a synthetic dataset, we find that CLIP is largely incapable of performing spatial reasoning off-the-shelf. Thus, the second component of ReCLIP is a spatial relation resolver that handles several types of spatial relations. We reduce the gap between zero-shot baselines from prior work and supervised models by as much as 29% on RefCOCOg, and on RefGTA (video game imagery), ReCLIP's relative improvement over supervised ReC models trained on real images is 8%.

Mechanistic interpretability aims to understand model behaviors in terms of specific, interpretable features, often hypothesized to manifest as low-dimensional subspaces of activations. Specifically, recent studies have explored subspace interventions (such as activation patching) as a way to simultaneously manipulate model behavior and attribute the features behind it to given subspaces. In this work, we demonstrate that these two aims diverge, potentially leading to an illusory sense of interpretability. Counterintuitively, even if a subspace intervention makes the model's output behave as if the value of a feature was changed, this effect may be achieved by activating a dormant parallel pathway leveraging another subspace that is causally disconnected from model outputs. We demonstrate this phenomenon in a distilled mathematical example, in two real-world domains (the indirect object identification task and factual recall), and present evidence for its prevalence in practice. In the context of factual recall, we further show a link to rank-1 fact editing, providing a mechanistic explanation for previous work observing an inconsistency between fact editing performance and fact localization. However, this does not imply that activation patching of subspaces is intrinsically unfit for interpretability. To contextualize our findings, we also show what a success case looks like in a task (indirect object identification) where prior manual circuit analysis informs an understanding of the location of a feature. We explore the additional evidence needed to argue that a patched subspace is faithful.

Recent proprietary models such as Sora2 demonstrate promising progress in generating multi-shot videos conditioned on multiple reference characters. However, academic research on this problem remains limited. We study this task and identify a core challenge: when reference images exhibit highly similar appearances, the model often suffers from reference confusion, where semantically similar tokens degrade the model's ability to retrieve the correct context. To address this, we introduce PoCo (Position Embedding as a Context Controller), which incorporates position encoding as additional context control beyond semantic retrieval. By employing side information of tokens, PoCo enables precise token-level matching while preserving implicit semantic consistency modeling. Building on PoCo, we develop a multi-reference and multi-shot video generation model capable of reliably controlling characters with extremely similar visual traits. Extensive experiments demonstrate that PoCo improves cross-shot consistency and reference fidelity compared with various baselines.

Prior methods that tackle the problem of generalizable object pose estimation highly rely on having dense views of the unseen object. By contrast, we address the scenario where only a single reference view of the object is available. Our goal then is to estimate the relative object pose between this reference view and a query image that depicts the object in a different pose. In this scenario, robust generalization is imperative due to the presence of unseen objects during testing and the large-scale object pose variation between the reference and the query. To this end, we present a new hypothesis-and-verification framework, in which we generate and evaluate multiple pose hypotheses, ultimately selecting the most reliable one as the relative object pose. To measure reliability, we introduce a 3D-aware verification that explicitly applies 3D transformations to the 3D object representations learned from the two input images. Our comprehensive experiments on the Objaverse, LINEMOD, and CO3D datasets evidence the superior accuracy of our approach in relative pose estimation and its robustness in large-scale pose variations, when dealing with unseen objects.

In person re-identification (re-ID) task, it is still challenging to learn discriminative representation by deep learning, due to limited data. Generally speaking, the model will get better performance when increasing the amount of data. The addition of similar classes strengthens the ability of the classifier to identify similar identities, thereby improving the discrimination of representation. In this paper, we propose a Diverse and Compact Transformer (DC-Former) that can achieve a similar effect by splitting embedding space into multiple diverse and compact subspaces. Compact embedding subspace helps model learn more robust and discriminative embedding to identify similar classes. And the fusion of these diverse embeddings containing more fine-grained information can further improve the effect of re-ID. Specifically, multiple class tokens are used in vision transformer to represent multiple embedding spaces. Then, a self-diverse constraint (SDC) is applied to these spaces to push them away from each other, which makes each embedding space diverse and compact. Further, a dynamic weight controller(DWC) is further designed for balancing the relative importance among them during training. The experimental results of our method are promising, which surpass previous state-of-the-art methods on several commonly used person re-ID benchmarks.

Deep subspace clustering (DSC) algorithms face several challenges that hinder their widespread adoption across variois application domains. First, clustering quality is typically assessed using only the encoder's output layer, disregarding valuable information present in the intermediate layers. Second, most DSC approaches treat representation learning and subspace clustering as independent tasks, limiting their effectiveness. Third, they assume the availability of a held-out dataset for hyperparameter tuning, which is often impractical in real-world scenarios. Fourth, learning termination is commonly based on clustering error monitoring, requiring external labels. Finally, their performance often depends on post-processing techniques that rely on labeled data. To address this limitations, we introduce a novel single-view DSC approach that: (i) minimizes a layer-wise self expression loss using a joint representation matrix; (ii) optimizes a subspace-structured norm to enhance clustering quality; (iii) employs a multi-stage sequential learning framework, consisting of pre-training and fine-tuning, enabling the use of multiple regularization terms without hyperparameter tuning; (iv) incorporates a relative error-based self-stopping mechanism to terminate training without labels; and (v) retains a fixed number of leading coefficients in the learned representation matrix based on prior knowledge. We evaluate the proposed method on six datasets representing faces, digits, and objects. The results show that our method outperforms most linear SC algorithms with careffulyl tuned hyperparameters while maintaining competitive performance with the best performing linear appoaches.

Automated summary quality assessment falls into two categories: reference-based and reference-free. Reference-based metrics, historically deemed more accurate due to the additional information provided by human-written references, are limited by their reliance on human input. In this paper, we hypothesize that the comparison methodologies used by some reference-based metrics to evaluate a system summary against its corresponding reference can be effectively adapted to assess it against its source document, thereby transforming these metrics into reference-free ones. Experimental results support this hypothesis. After being repurposed reference-freely, the zero-shot BERTScore using the pretrained DeBERTa-large-MNLI model of <0.5B parameters consistently outperforms its original reference-based version across various aspects on the SummEval and Newsroom datasets. It also excels in comparison to most existing reference-free metrics and closely competes with zero-shot summary evaluators based on GPT-3.5.

The rapid advancement of Large Language Models (LLMs) necessitates robust evaluation methodologies. Current benchmarking approaches often rely on comparing model outputs against predefined prompts and reference outputs. Relying on predefined reference outputs hinders flexible adaptation of benchmarks to the rapidly evolving capabilities of LLMs. This limitation necessitates periodic efforts to prepare new benchmarks. To keep pace with rapidly evolving LLM capabilities, we propose a more flexible benchmarking approach. Our method, \textbf{Varco Arena}, provides reference-free benchmarking of LLMs in tournament style. \textbf{Varco Arena} directly compares LLM outputs across a diverse set of prompts, determining model rankings through a single-elimination tournament structure. This direct pairwise comparison offers two key advantages: (1) Direct comparison, unmediated by reference text, more effectively orders competing LLMs, resulting in more reliable rankings, and (2) reference-free approach to benchmarking adds flexibility in updating benchmark prompts by eliminating the need for quality references. Our empirical results, supported by simulation experiments, demonstrate that the \textbf{Varco Arena} tournament approach aligns better with the current Elo model for benchmarking LLMs. The alignment is measured in terms of Spearman correlation, showing improvement over current practice of benchmarking that use reference outputs as comparison anchors.

The recent success of distributed word representations has led to an increased interest in analyzing the properties of their spatial distribution. Several studies have suggested that contextualized word embedding models do not isotropically project tokens into vector space. However, current methods designed to measure isotropy, such as average random cosine similarity and the partition score, have not been thoroughly analyzed and are not appropriate for measuring isotropy. We propose IsoScore: a novel tool that quantifies the degree to which a point cloud uniformly utilizes the ambient vector space. Using rigorously designed tests, we demonstrate that IsoScore is the only tool available in the literature that accurately measures how uniformly distributed variance is across dimensions in vector space. Additionally, we use IsoScore to challenge a number of recent conclusions in the NLP literature that have been derived using brittle metrics of isotropy. We caution future studies from using existing tools to measure isotropy in contextualized embedding space as resulting conclusions will be misleading or altogether inaccurate.